Hallo zusammen
Ich kann auf meinem OMV kein SMART Status abfragen:
ZitatAlles anzeigenroot@OMV01:~# smartctl -a /dev/sdb
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-4-amd64] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
Vendor: WDC
Product: WD40EFRX-68WT0N0
Revision: 82.0
User Capacity: 4,000,787,030,016 bytes [4.00 TB]
Logical block size: 512 bytes
>> Terminate command early due to bad response to IEC mode page
A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.
root@OMV01:~# smartctl -a /dev/sdc
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-4-amd64] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
Den Fehler erhalte ich auf allen meinen 3 WD Red Festplatten.
Auf meinem Server ist Windows 2012R2 Hyper-V installiert. OMV läuft als VM. Die 3 WD Red Platten werden Passthrough direkt an OMV durchgereicht.
Habt ihr eine Idee, wieso SMART bei mir nicht funktioniert?
Besten Dank.