RasPi - Wireless adapter MT7601U

Hello,

I'm trying to put my RasPi with OpenMediaVault on my wireless network. As i know, most people say not to do, but for me, it will do just fine!
I bought a wireless adapter MT7601U.

I managed to install the drivers:

Zitat

root@(none):~# lsusb
Protocol spec without prior Class and Subclass spec at line 17403
Bus 001 Device 002: ID 0424:9512 Standard Microsystems Corp. SMC9512/9514 USB Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast Ethernet Adapter
Bus 001 Device 004: ID 059f:102a LaCie, Ltd Rikiki Hard Drive
Bus 001 Device 006: ID 148f:7601 Ralink Technology, Corp. MT7601U Wireless Adapter
root@(none):~# ifconfig
eth0 Link encap:Ethernet HWaddr b8:27:eb:5c:a9:6b
inet addr:192.168.1.23 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:18551 errors:0 dropped:0 overruns:0 frame:0
TX packets:26654 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:9184165 (8.7 MiB) TX bytes:5906169 (5.6 MiB)

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:36 errors:0 dropped:0 overruns:0 frame:0
TX packets:36 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:8271 (8.0 KiB) TX bytes:8271 (8.0 KiB)

ra0 Link encap:Ethernet HWaddr 7c:dd:90:73:2d:ea
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:93810 errors:0 dropped:0 overruns:0 frame:0
TX packets:108234 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:21963758 (20.9 MiB) TX bytes:11256336 (10.7 MiB)

root@(none):~# iwconfig
-bash: iwconfig: command not found

Alles anzeigen

As you can see, the device is ok with lsusb.
Also, the ifconfig shows ra0, that is not connected to the network.
But the command iwconfig is not working; also, the command iwlist is unknown...

I tried to configurate the ra0, but this has not luck...
This is my interfaces configuration file:

Zitat

auto ra0
allow-hotplug ra0
iface ra0 inet static
wpa-ssid *** my wireless network***
wpa-psk*** my wireless passport
address 192.168.1.24 # Static IP you want
netmask 255.255.255.0
gateway 192.168.1.1 # IP of your router

Alles anzeigen

anybody an idea?
already thanks!

Hello,

Thanks!
Just found the package iw. It installed, but it said it needed crda. This is not in the repo...
any idea to solve this?

tx!

Zitat von subzero79

It is in mine, check again is part of main repo and available for arm

packages.debian.org/wheezy/crda

I'm using the image for raspberry pi.
How do i add this to the repository?

For me, it's not working, but probably, i do something wrong...

Zitat

deb http://mirrordirector.raspbian.org/raspbian/ wheezy main contrib non-free rpi

i added also 'omv-extras.org' and 'download-managers' via the webportal.

already thanks!