Redirection by frame does not work...

  • Hi guys,


    I'm here for a little network issue and the DNS redirection from my DNS provider to my local OMV.


    That's the deal : I would like to type mydns.com or openmediavault.mydns.com or owncloud.mydns.com and be redirected to my OMV own ip address (according to their ports).


    That's what I did :
    1 - I created the two sub-domains in my admin control panel from the provider
    2 - In the DNS options I chose redirection to another adress, which is my static ip address like 82.x.x.x (with no port so it's 80 by default and I checked "Always connect to OMV by https")
    3 - I chose "Redirection by frame" for the sub-domain openmediavault.mydns.com to the adress 82.x.x.x:443 (I changed the original https port for another one but here is the example)
    4 - I chose "Redirection by frame" for the sub-domain owncloud.mydns.com to the adress 82.x.x.x:8443 (I changed the original owncloud port for another one but here is the example)
    5 - On my router, I transfered all inbound addresses from the port 80 and 8443 to the local address of my NAS (192.168.0.50)


    That's the issue :
    1 - Redirection by frame does not work (timed out)
    but
    2 - Redirection by http works fine


    One question stays in my mind, when I chose the address of DNS names (number 2), do I have to go on my static public IP or should I go with the DNS names of my ISP on my router ??


    Thx for reading.
    Cheers


    PS : next step is securing the whole things with certificates and SSL

    - ASROCK FM2A88X-ITX+ (SATAIII (6Gb/s) x6 (for the DATA), mSATA x1 (for the OS))
    - AMD A6 7400K 3.5GHz
    - Corsair 2Go DDR3 1333MHz C9 (x2)
    - Intel Corporation 82574L Gigabit Network Connection
    - COOLER MASTER G450M (80+ bronze)
    - WD Red 2To 64Mo 3.5" SATAIII (6Gb/s)
    - 32 Go SSD mSATA KingSpec Half-Size Solid State
    - Fractal Design Node 304 black (HDD 3.5" x6)
    - RAID 5 XFS
    - OMV 4.1.35-1 Arrakis

  • Did you find a way to resolve this issue?


    I am new to open media vault and have set up a subdomain and a web redirect as I have done for many other programs that I have (couch potato, sabnzbd etc...) and I am getting the below message in Microsoft edge (and just a blank screen in chrome that shows the domain number address and "refused to connect" message). Incidentally, if I type the domain address number or the domain with the port number everything works just fine.


    This content can’t be shown in a frame


    There is supposed to be some content here, but the publisher doesn’t allow it to be displayed in a frame. This is to help protect the security of any information you might enter into this site.
    Try this

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!