Hi,
I was using Sarduakar on my HP N40L NAS. Today I decided to upgrade to Kralizec.
Everything works fine except my UPS.
Previously, I used megatec_usb driver for NUT. However the driver is not available in the new version. NUT changelog recommends to use blazer_usb instead.
So, here is the configuration:
Code
<nut>
<enable>1</enable>
<upsname>ups</upsname>
<comment></comment>
<driverconf>#driver=megatec_usb
driver=blazer_usb
port=auto
</driverconf>
<shutdownmode>fsd</shutdownmode>
<shutdowntimer>60</shutdowntimer>
<remotemonitor>1</remotemonitor>
<remoteuser>root</remoteuser>
<remotepassword></remotepassword>
</nut>
Alles anzeigen
The problem is, NUT causes shut down upon system boots up.
Code
Feb 22 19:48:43 microserver upsd[2586]: listening on 127.0.0.1 port 3493
Feb 22 19:48:43 microserver upsd[2586]: Connected to UPS [ups]: blazer_usb-ups
Feb 22 19:48:43 microserver upsd[2596]: Startup successful
Feb 22 19:48:43 microserver upsd[2596]: User monmaster@127.0.0.1 logged into UPS [ups]
Feb 22 19:48:43 microserver upsmon[2608]: Startup successful
Feb 22 19:48:48 microserver upsmon[2610]: UPS ups@localhost: forced shutdown in progress
Feb 22 19:48:48 microserver upsd[2596]: Client monmaster@127.0.0.1 set FSD on UPS [ups]
Feb 22 19:48:48 microserver upsmon[2610]: Executing automatic power-fail shutdown
Feb 22 19:48:48 microserver upsmon[2610]: Auto logout and shutdown proceeding
Feb 22 19:48:48 microserver upssched[2760]: Executing command: notify
Feb 22 19:48:48 microserver upssched[2758]: Executing command: forced-shutdown
Feb 22 19:48:48 microserver upsmon[2610]: Signal 10: User requested FSD
Feb 22 19:48:49 microserver upssched-cmd: UPS ups@localhost: - Forced shutdown in progress
Feb 22 19:48:49 microserver upssched-cmd: Automatic logout and shutdown proceeding
Alles anzeigen
I need help about this weird behaviour.
Sorry for bad English.
Thanks,
temizel.