VDR plugin - scanning different satelites

    • OMV 1.0
    • VDR plugin - scanning different satelites

      Hi,

      I have Digital Devices Cine S2 up and running with VDR. Scanning the ASTRA channels did work fine. However adding the HOTBIRD channels does not seem to work. I did run a scan on HOTBIRD several times but it does not add any new channels?

      Any idea - what I might missing?

      Thanks Nick
    • Hi Indigo

      I am using a multiswitch which is connected to two LNBs - one is feeding ASTRA 19.2 East and the other 13 east HOTBIRD. On the other side the multiswitch is connected to the four Digital Device Cine2 tuners.
      VDR is currently only pciking up the ASTAR signals and channels.

      Thanks Dr. Knoblauch
    • VDR plugin - scanning different satelites

      Es scheint so als ob die Anleitungen für mich zu kompliziert sind. Ich kann machen was ich will aber ausser ASTRA finde ich keine Sender.

      Ich glaube allerdings, dass die SAT Namen in der Source und dem diseqc.conf nicht konsistent sind / bzw sein müssten.
      Ich habe auch schon damit rumgespielt S13E auf S13.0 angepasst - aber hatte auch keine erfolg.




      root@Openmediavault:/# dmesg |grep DVB

      Source Code

      1. [ 3.268978] c29d6a83b3c14cf81a4c90a941eb923625192398 [media] cx23885: add DVBSky S952 support
      2. [ 3.467093] DDBridge driver detected: Digital Devices Cine S2 V6.5 DVB adapter
      3. [ 3.468269] Port 0 (TAB 1): DUAL DVB-S2
      4. [ 3.469150] Port 1 (TAB 2): DUAL DVB-S2
      5. [ 3.471116] DVB: registering new adapter (DDBridge)
      6. [ 3.471117] DVB: registering new adapter (DDBridge)
      7. [ 3.471118] DVB: registering new adapter (DDBridge)
      8. [ 3.471119] DVB: registering new adapter (DDBridge)
      9. [ 3.779085] ddbridge 0000:06:00.0: DVB: registering adapter 0 frontend 0 (STV090x Multistandard)...
      10. [ 3.814093] ddbridge 0000:06:00.0: DVB: registering adapter 1 frontend 0 (STV090x Multistandard)...
      11. [ 3.994122] ddbridge 0000:06:00.0: DVB: registering adapter 2 frontend 0 (STV090x Multistandard)...
      12. [ 4.030151] ddbridge 0000:06:00.0: DVB: registering adapter 3 frontend 0 (STV090x Multistandard)...
      Display All


      Diseqc.conf

      Source Code

      1. # Full DiSEqC sequence:
      2. 1 2:
      3. S19.2E 11700 V 9750 t v W15 [E0 10 38 F0] W15 A W15 t
      4. S19.2E 99999 V 10600 t v W15 [E0 10 38 F1] W15 A W15 T
      5. S19.2E 11700 H 9750 t V W15 [E0 10 38 F2] W15 A W15 t
      6. S19.2E 99999 H 10600 t V W15 [E0 10 38 F3] W15 A W15 T
      7. 3 4:
      8. S13.0E 11700 V 9750 t v W15 [E0 10 38 F4] W15 B W15 t
      9. S13.0E 99999 V 10600 t v W15 [E0 10 38 F5] W15 B W15 T
      10. S13.0E 11700 H 9750 t V W15 [E0 10 38 F6] W15 B W15 t
      11. S13.0E 99999 H 10600 t V W15 [E0 10 38 F7] W15 B W15 T
      Display All



      setup.conf

      Source Code

      1. DiSEqC = 1
      2. AudioLanguages =
      3. DisplaySubtitles = 0
      4. EPGLanguages =
      5. MaxVideoFileSize = 2000
      6. MinUserInactivity = 0
      7. SubtitleLanguages =
      8. UpdateChannels = 4
      9. UseSubtitle = 0
      10. live.StreamdevPort = 3000
      11. streamdev-server.HTTPServerPort = 3000​
      Display All


      sources.conf

      Source Code

      1. S3E Eutelsat 3A & Rascom 1R
      2. S4E Eurobird 4A
      3. S4.8E Astra 4A
      4. S7E Eutelsat W3A
      5. S9E Eurobird 9A
      6. S10E Eutelsat W2A
      7. S13E Hotbird 6/8/9
      8. S16E Eutelsat W2M & Eurobird 16A
      9. S19.2E Astra 1H/1KR/1L/1M/2C
      10. S21.6E Eutelsat W6
      11. S23.5E Astra 3A/3B
      12. S25.5E Eurobird 2
      13. S26E Badr 4/5/6
      14. S28.2E Astra 2A/2B/2D
      15. S28.5E Eurobird 1
      16. S30.5E Arabsat 5A
      17. S31.5E Astra 1G
      18. S33E Eurobird 3 & Intelsat New Dawn
      19. S36E Eutelsat W4/W7
      20. S38E Paksat 1
      21. S39E Hellas Sat 2
      22. S40E Express AM1
      23. S42E Turksat 2A/3A
      24. S45E Intelsat 12
      25. S49E Yamal 202
      26. S53E Express AM22
      Display All
    • probiers mal mit diesem dieseqc.conf:

      Source Code

      1. S19.2E 11700 V 9750 t v W15 [E0 10 38 F0] W15 A W15 t
      2. S19.2E 99999 V 10600 t v W15 [E0 10 38 F1] W15 A W15 T
      3. S19.2E 11700 H 9750 t V W15 [E0 10 38 F2] W15 A W15 t
      4. S19.2E 99999 H 10600 t V W15 [E0 10 38 F3] W15 A W15 T
      5. S13E 11700 V 9750 t v W15 [E0 10 38 F4] W15 B W15 t
      6. S13E 99999 V 10600 t v W15 [E0 10 38 F5] W15 B W15 T
      7. S13E 11700 H 9750 t V W15 [E0 10 38 F6] W15 B W15 t
      8. S13E 99999 H 10600 t V W15 [E0 10 38 F7] W15 B W15 T

    • Ich habs versucht selbes Problem - kein Scan.

      Was ich allerdings nicht verstehe ist, dass w_scan S13E0 erwartet und in Diseqc.conf und sources.conf S13E gesetzt ist. Ich habe nun mal Diseqc und sources.conf auf S13E0 gesetzt. Mal schauen was passiert. Update folgt.

      w_scan -s? output

      Source Code

      1. S180E0 180.0 east Intelsat 18
      2. S172E0 172.0 east GE 23
      3. S169E0 169.0 east Intelsat 5
      4. S166E0 166.0 east Intelsat 8
      5. S162E0 162.0 east Superbird B2
      6. S160E0 160.0 east Optus D1
      7. S156E0 156.0 east Optus C1/D3
      8. S154E0 154.0 east JCSAT 2A
      9. S152E0 152.0 east Optus D2
      10. S144E0 144.0 east Superbird C2
      11. S140E0 140.0 east Express AM3
      12. S138E0 134.0 east Telstar 18
      13. S134E0 134.0 east Apstar 6
      14. S132E0 132.0 east Vinasat 1 / JCSAT 5A
      15. S128E0 128.0 east JCSAT 3A
      16. S125E0 125.0 east ChinaSat 6A
      17. S124E0 124.0 east JCSAT 4A
      18. S122E2 122.2 east AsiaSat 4
      19. S118E0 118.0 east Telkom 2
      20. S116E0 116.0 east Koreasat 6 / ABS 7
      21. S115E5 115.5 east ChinaSat 6B
      22. S113E0 113.0 east Koreasat 5 / Palapa D
      23. S110E5 110.5 east ChinaSat 10
      24. S110E0 110.0 east NSat 110 / BSat 2C/3A / JCSat 110R
      25. S108E2 108.2 east Telkom 1 / NSS 11 / SES 7
      26. S105E5 105.5 east AsiaSat 3S
      27. S103E0 103.0 east Express A2
      28. S100E5 100.5 east AsiaSat 5
      29. S96E5 96.5 east Express AM33
      30. S95E0 95.0 east NSS 6
      31. S93E5 93.5 east Insat 3A/4B
      32. S91E5 91.5 east Measat 3 / 3A
      33. S90E0 90.0 east Yamal 201
      34. S88E0 88.0 east ST 2
      35. S87E5 87.5 east ChinaSat 5A
      36. S86E5 86.5 east KazSat 2
      37. S85E0 85.0 east Horisons 2 / Intelsat 15
      38. S83E0 83.0 east Insat 2E/4A
      39. S78E5 78.5 east Thaicom 2/5
      40. S76E5 76.5 east Telstar 10 (Apstar 2R)
      41. S75E0 75.0 east ABS 1
      42. S70E5 70.5 east Eutelsat W5
      43. S68E5 68.5 east Intelsat 7/10
      44. S66E0 66.0 east Intelsat 17
      45. S64E2 64.2 east Intelsat 906
      46. S62E0 62.0 east Intelsat 902
      47. S60E0 60.0 east Intelsat 904
      48. S57E0 57.0 east NSS 12
      49. S56E0 56.0 east Bonum 1
      50. S53E0 53.0 east Express AM22
      51. S52E5 52.5 east Yahsat 1A
      52. S49E0 49.0 east Yamal 202
      53. S45E0 45.0 east Intelsat 12
      54. S42E0 42.0 east Turksat 2A/3A
      55. S40E0 40.0 east Express AM1
      56. S39E0 39.0 east Hellas Sat 2
      57. S38E0 38.0 east Paksat 1
      58. S36E0 36.0 east Eutelsat W4/W7
      59. S33E0 33.0 east Eurobird 3
      60. S31E5 31.5 east Astra 5A/1D
      61. S30E5 30.5 east Arabsat 5A
      62. S28E2 28.2 east Astra 2A/B/C/D + EuroBird 1 28.5
      63. S26E0 26.X east Badr C/3/4/6
      64. S25E5 25.5 east Eurobird 2
      65. S23E5 23.5 east Astra 1E/3A
      66. S21E6 21.6 east Eutelsat W6
      67. S20E0 20.0 east Arabsat 5C
      68. S19E2 19.2 east Astra 1F/1G/1H/1KR/1L
      69. S16E0 16.0 east Eutelsat W2
      70. S13E0 13.0 east Hotbird 6/7A/8
      71. S10E0 10.0 east Eutelsat W1
      72. S9E0 9.0 east Eurobird 9
      73. S7E0 7.0 east Eutelsat W3A
      74. S4E8 4.8 east Sirius
      75. S3E0 3.0 east Eutelsat 3A/3C, Rascom 1R
      76. S0W8 0.8 west Thor 3/5 & Intelsat 10-02
      77. S4W0 4.0 west Amos 1/2/3
      78. S5W0 5.0 west Atlantic Bird 3/ Eutelsat 5A
      79. S7W0 7.0 west Nilesat 101/102 & Atlantic Bird 4
      80. S8W0 8.0 west Atlantic Bird 2
      81. S11W0 11.0 west Express AM44
      82. S12W5 12.5 west Atlantic Bird 1
      83. S14W0 14.0 west Express A4
      84. S15W0 15.0 west Telstar 12
      85. S18W0 18.0 west Intelsat 901
      86. S20W0 20.0 west NSS 5
      87. S22W0 22.0 west NSS 7
      88. S24W5 24.5 west Intelsat 905
      89. S27W5 27.X west Intelsat 907
      90. S30W0 30.0 west Hispasat 1C/1D
      91. S31W5 31.5 west Intelsat 25
      92. S34W5 34.5 west Intelsat 903
      93. S37W5 37.5 west NSS 10 / Telstar 11N
      94. S40W5 40.5 west NSS 806
      95. S43W0 43.0 west Intelsat 11
      96. S45W0 45.0 west Intelsat 14
      97. S50W0 50.0 west Intelsat 1R
      98. S53W0 53.0 west Intelsat 707
      99. S55W5 55.5 west Intelsat 805
      100. S58W0 58.0 west Intelsat 9/16
      101. S63W0 63.0 west Telstar 14R
      102. S65W0 65.0 west Star One C1
      103. S70W0 70.0 west Star One C2
      104. S72W0 72.0 west AMC 6
      105. S78W0 78.0 west SIMON BOLIVAR
      106. S83W0 83.0 west AMC 9
      107. S84W0 84.0 west Brasilsat B4
      108. S85W0 85.0 west AMC 16
      109. S87W0 87.0 west SES 2
      110. S89W0 89.0 west Galaxy 28
      111. S91W0 95.0 west Nimiq 1
      112. S93W1 93.1 west Galaxy 25
      113. S95W0 95.0 west Galaxy 3C
      114. S97W0 97.0 west Galaxy 19
      115. S99W2 99.2 west Galaxy 16 / Spaceway 2
      116. S101W0 101.0 west SES 1
      117. S103W0 103.0 west AMC 1
      118. S105W0 105.0 west AMC 15/18
      119. S107W3 107.3 west Anik F1/F1R
      120. S111W1 111.1 west Anik F2
      121. S113W0 113.0 west SatMex 6
      122. S116W8 116.8 west SatMex 5
      123. S119W0 119.0 west Anik F3
      124. S121W0 121.0 west Echostar 9 / Galaxy 23
      125. S123W0 123.0 west Galaxy 18
      126. S125W0 125.0 west Galaxy 14 / AMC 21
      127. S127W0 127.0 west Galaxy 13 / Horizons 1
      128. S131W0 131.0 west AMC 11
      129. S133W0 133.0 west Galaxy 15
      130. S135W0 135.0 west AMC 10
      131. S137W0 135.0 west AMC 7
      132. S139W0 135.0 west AMC 8
      133. S177W0 177.0 west NSS 9
      Display All
    • Versuche es mal mit dem und setze die source.conf auf die satandart einstellungen zurück.

      S13E 11700 V 9750 t v W15 [E0 10 27] W15 [E0 10 22] W15 t
      S13E 99999 V 10600 t v W15 [E0 10 27] W15 [E0 10 22] W15 T
      S13E 11700 H 9750 t V W15 [E0 10 27] W15 [E0 10 22] W15 t
      S13E 99999 H 10600 t V W15 [E0 10 27] W15 [E0 10 22] W15 T

      S19.2E 11700 V 9750 t v W15 [E0 10 27] W15 [E0 10 26] W15 t
      S19.2E 99999 V 10600 t v W15 [E0 10 27] W15 [E0 10 26] W15 T
      S19.2E 11700 H 9750 t V W15 [E0 10 27] W15 [E0 10 26] W15 t
      S19.2E 99999 H 10600 t V W15 [E0 10 27] W15 [E0 10 26] W15 T
    • Alles beim alten.
      Das komische an der Sache ist auch, dass wenn ich w_Scan manuell starte dann sucht er
      trotzdem nur ASTRA -

      w_scan -fs -s S13E0 -c DE -X > /home/channels_hotbird.conf

      Source Code

      1. w_scan version 20121111 (compiled for DVB API 5.4)
      2. using settings for 13.0 east Hotbird 6/7A/8
      3. scan type SATELLITE, channellist 69
      4. output format czap/tzap/szap/xine
      5. output charset 'UTF-8', use -C <charset> to override
      6. Info: using DVB adapter auto detection.
      7. /dev/dvb/adapter0/frontend0 -> SATELLITE "STV090x Multistandard": very good :-))
      8. Using SATELLITE frontend (adapter /dev/dvb/adapter0/frontend0)
      9. -_-_-_-_ Getting frontend capabilities-_-_-_-_
      10. Using DVB API 5.a
      11. frontend 'STV090x Multistandard' supports
      12. INVERSION_AUTO
      13. DVB-S
      14. DVB-S2
      15. FREQ (0.95GHz ... 2.15GHz)
      16. SRATE (1.000MSym/s ... 45.000MSym/s)
      17. using LNB "UNIVERSAL"
      18. -_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
      19. und dann gehts weiter ......
      Display All
    • Anbei meine configs. Grüsse Nick



      /etc/vdr/setup.conf

      Source Code

      1. DiSEqC = 1
      2. AudioLanguages =
      3. DisplaySubtitles = 0
      4. EPGLanguages =
      5. MaxVideoFileSize = 2000
      6. MinUserInactivity = 0
      7. SubtitleLanguages =
      8. UpdateChannels = 4
      9. UseSubtitle = 0
      10. live.StreamdevPort = 3000
      11. streamdev-server.HTTPServerPort = 3000
      Display All


      diseqc.conf

      Source Code

      1. #DiSEqC configuration for VDR
      2. #
      3. # Format:
      4. #
      5. # satellite slof polarization lof command...
      6. #
      7. # satellite: one of the 'S' codes defined in sources.conf
      8. # slof: switch frequency of LNB; the first entry with
      9. # an slof greater than the actual transponder
      10. # frequency will be used
      11. # polarization: V = vertical, H = horizontal, L = Left circular, R = Right circular
      12. # lof: the local oscillator frequency to subtract from
      13. # the actual transponder frequency
      14. # command:
      15. # t tone off
      16. # T tone on
      17. # v voltage low (13V)
      18. # V voltage high (18V)
      19. # A mini A
      20. # B mini B
      21. # Sn Satellite channel routing code sequence for bank n follows
      22. # Wnn wait nn milliseconds (nn may be any positive integer number)
      23. # [xx ...] hex code sequence (max. 6)
      24. #
      25. # The 'command...' part is optional.
      26. #
      27. # A line containing space separated integer numbers, terminated with a ':',
      28. # defines that any following DiSEqC sequences apply only to the given list
      29. # of device numbers.
      30. #
      31. # Examples:
      32. # Full DiSEqC sequence:
      33. #S19.2E 11700 V 9750 t v W15 [E0 10 38 F0] W15 A W15 t
      34. #S19.2E 99999 V 10600 t v W15 [E0 10 38 F1] W15 A W15 T
      35. #S19.2E 11700 H 9750 t V W15 [E0 10 38 F2] W15 A W15 t
      36. #S19.2E 99999 H 10600 t V W15 [E0 10 38 F3] W15 A W15 T
      37. #S13.0E 11700 V 9750 t v W15 [E0 10 38 F4] W15 B W15 t
      38. #S13.0E 99999 V 10600 t v W15 [E0 10 38 F5] W15 B W15 T
      39. #S13.0E 11700 H 9750 t V W15 [E0 10 38 F6] W15 B W15 t
      40. #S13.0E 99999 H 10600 t V W15 [E0 10 38 F7] W15 B W15 T
      41. S13E 11700 V 9750 t v W15 [E0 10 27] W15 [E0 10 22] W15 t
      42. S13E 99999 V 10600 t v W15 [E0 10 27] W15 [E0 10 22] W15 T
      43. S13E 11700 H 9750 t V W15 [E0 10 27] W15 [E0 10 22] W15 t
      44. S13E 99999 H 10600 t V W15 [E0 10 27] W15 [E0 10 22] W15 T
      Display All



      sources.conf

      Source Code

      1. # Sources configuration for VDR
      2. #
      3. # Format:
      4. #
      5. # code description
      6. #
      7. # S (satellite) xy.z (orbital position in degrees) E or W (east or west)
      8. # Note: only the first part is actually used by VDR. The description part
      9. # is for the "human" interface for clarity.
      10. #
      11. # '&' means same orbital position but different host company.
      12. # '/' means same (or very little deviation) orbital position & host.
      13. # A value in () means this satellite is still in it's test phase.
      14. #
      15. # Please contact vdr@tvdr.de before assigning a new code
      16. # to a description, in order to keep them unique.
      17. # Satellites
      18. # Europe
      19. S3E Eutelsat 3A/3D & Rascom 1R
      20. S4E Eutelsat 4B
      21. S4.8E Astra 4A
      22. S5E SES 5
      23. S7E Eutelsat 7A
      24. S9E Eutelsat 9A/Ka-Sat 9A
      25. S10E Eutelsat 10A
      26. S13E Eutelsat Hot Bird 13B/13C/13D
      27. S16E Eutelsat 16A/16B
      28. S17E Amos 5
      29. S19.2E Astra 1KR/1L/1M/2C
      30. S21.6E Eutelsat 21B
      31. S23.5E Astra 3B
      32. S25.5E Eutelsat 25B
      33. S26E Badr 4/5/6
      34. S28.2E Astra 1N/2A/2F
      35. S28.5E Eutelsat 28A
      36. S30.5E Arabsat 5A
      37. S31.5E Astra 1G
      38. S33E Eutelsat 33A & Intelsat 28
      39. S36E Eutelsat 36A/36B
      40. S38E Paksat 1R
      41. S39E Hellas Sat 2
      42. S42E Turksat 2A/3A
      43. S45E Intelsat 12
      44. S46E Azerspace-1
      Display All
    • So wie es in der diseqc.conf ausschaut kann ja auch nur 13-er gehen, oder geht es unten noch weiter?

      Ansonsten versuche es mal mit dem was als Beispiel in der dieseqc steht. Einfach die # wegmachen die sorgen dafür das alles dahinter ignoriert wird. Sonst fällt mir gerade nix weiter auf.

      Versuche es mal ohne scan sondern einen fertigen channellist von hier z.b.
    • ich habe noch etwas weiter rumgebastelt und folgendes festgestellt. Die setup.conf wird immer wieder automatisch überschrieben. D.h. ich mach den diseqc = 1 rein und nach dem start ist der Eintrag wieder weg.
      Weiss jemand wie man diese Einträge permanent setzen kann?
      Desweiteren bin ich mir nicht sicher wie Hotbird angesprochen werden muss - als S13.0E oder S13E und wo müssen diese Eintrage alle gesetzt sein. Bis jetzt weiss ich diseqc.conf und sources.conf.

      Grüsse und Danke / Nick