Zoneminder on 1.18

    • OMV 1.0

    This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

    • Hi. I built the package as per the instructions on Git (think I got everything right). Installed the package. Says the zoneminder service is started. But when I go to log into the web interface, I get "ZoneMinder is not installed properly: php's date.timezone is not set to a valid timezone".

      Any ideas? Did I screw up building the package somehow?

      ** edit - I commented out the check in the zoneminder index.php and the web interface works now... But I'm pretty sure that I should probably find the cause of that error and fix it...

      The post was edited 1 time, last by darcmanomv ().

    • You need to edit php.ini and add your timezone to that setting, there can be 3 or more php.ini files in various locations. Your best bet would be to run find / -name php.ini and your timezone to each.
      [IMG:http://widgets.trakt.tv/users/1f5d0f5ed67f98ed9d06d9849b42dd0e/watched/banner@1x.jpg]
      What I am watching/watched on my Popcorn Hour media player
      omv 2.1.1 stoneburner | 64 bit | omvextrasorg 1.29
      MySQL (Percona) | Newznab | Sonarr | CP | HP | NZBget | YAMJ | CUPS
    • Thanks. I actually ended up changing my mind on that particular server (it was for my in-laws) and opted to make it a windows box with the trendnet pro software... it'll be much easier. But I'm going to put zoneminder on my own OMV box since I was gifted three IP cameras. So if I didn't do anything wrong with my install and I just need to do that, should be good.

      Thank you!
    • jhmiller wrote:

      <a href="https://github.com/cptjhmiller/omv-zoneminder" class="externalURL" rel="nofollow" target="_blank">github.com/cptjhmiller/omv-zoneminder</a>
      follow that to see if you can build it on your pi


      Hi,

      I followed it. The first problem was when trying "apt-get install autoconf automake dpatch ..." -> Unable to locate package libcrystalhd3
      The bigger problem I encountered with "dpkg -i libjpeg-turbo-official_1.3.90_amd64.deb" -> "dpkg: error processing libjpeg-turbo-official_1.3.90_amd64.deb (--install):
      package architecture (amd64) does not match system (armhf)
      Errors were encountered while processing:
      libjpeg-turbo-official_1.3.90_amd64.deb"
      and I do think that is my problem.

      Well I am a Noob with Linux, so there may be a simple solution which I cannot find. Is there a simple trick?

      Thank you in advance
    • This is a great camera although only 15fps at 3 megapixel. Not sure about compatibility with zoneminder since I don't use it.
      omv 4.1.12 arrakis | 64 bit | 4.15 proxmox kernel | omvextrasorg 4.1.11
      omv-extras.org plugins source code and issue tracker - github

      Please read this before posting a question and this and this for docker questions.
      Please don't PM for support... Too many PMs!
    • ryecoaaron wrote:

      This is a great camera although only 15fps at 3 megapixel. Not sure about compatibility with zoneminder since I don't use it.


      Interesting, I suppose I don't quite need 30 fps. I looked up some videos on that camera. It does look like a solid choice at a great price/performance/feature ratio. Thanks for the suggestion, I'm going to continue some research! And it looks like it does support ZM!
      wiki.zoneminder.com/Trendnet#TV-IP310PI
    • 1080p is only 2 megapixels. It might have a better frame rate at that slightly lower resolution. Never noticed the frame rate myself though. The camera also supports PoE making the wiring much easier.

      Currently, I just check my camera over the internet with the trendnet iOS app. Works well. Maybe I will try zoneminder one of these days.
      omv 4.1.12 arrakis | 64 bit | 4.15 proxmox kernel | omvextrasorg 4.1.11
      omv-extras.org plugins source code and issue tracker - github

      Please read this before posting a question and this and this for docker questions.
      Please don't PM for support... Too many PMs!
    • Hallo
      I have a problem.
      After i install the programm the webgui is defect!


      That text i see on screen if i open the webgui:

      It works!

      This is the default web page for this server.

      The web server software is running but no content has been added, yet.
      Server:
      Mainboard: Gigabyte GA-H97N-WIFI - CPU: Intel Core i3-4170T - CPU Kühler: EKL Alpenföhn BEN NEVIS - Gehäuse: BitFenix Prodigy ITX - RAM: 8GB Crucial Ballistix Sport DDR3-1600 -
      Netzteil: Be quiet! BN140 System Power 7 (300W) - 1x 120GB Samsung 850 Evo (System) - 2x 4TB WD Red (Data) - 1x 2TB Seagate Green (Data) - OMV: latest 2.x

      Plugins:
      Plex Media Server, RSync, JDownloader, ownCloud, eXtplorer, antivirus, autoshutdown
    • And there?
      Server:
      Mainboard: Gigabyte GA-H97N-WIFI - CPU: Intel Core i3-4170T - CPU Kühler: EKL Alpenföhn BEN NEVIS - Gehäuse: BitFenix Prodigy ITX - RAM: 8GB Crucial Ballistix Sport DDR3-1600 -
      Netzteil: Be quiet! BN140 System Power 7 (300W) - 1x 120GB Samsung 850 Evo (System) - 2x 4TB WD Red (Data) - 1x 2TB Seagate Green (Data) - OMV: latest 2.x

      Plugins:
      Plex Media Server, RSync, JDownloader, ownCloud, eXtplorer, antivirus, autoshutdown
    • Since the web gui isn't working right, I thought you would choose configure web gui. If you did and that didn't fix it, try this. If that doesn't work, what is the output of:

      dpkg -l | grep openmediavault
      omv 4.1.12 arrakis | 64 bit | 4.15 proxmox kernel | omvextrasorg 4.1.11
      omv-extras.org plugins source code and issue tracker - github

      Please read this before posting a question and this and this for docker questions.
      Please don't PM for support... Too many PMs!
    • Server:
      Mainboard: Gigabyte GA-H97N-WIFI - CPU: Intel Core i3-4170T - CPU Kühler: EKL Alpenföhn BEN NEVIS - Gehäuse: BitFenix Prodigy ITX - RAM: 8GB Crucial Ballistix Sport DDR3-1600 -
      Netzteil: Be quiet! BN140 System Power 7 (300W) - 1x 120GB Samsung 850 Evo (System) - 2x 4TB WD Red (Data) - 1x 2TB Seagate Green (Data) - OMV: latest 2.x

      Plugins:
      Plex Media Server, RSync, JDownloader, ownCloud, eXtplorer, antivirus, autoshutdown
    • wget http://dh2k.omv-extras.org/debian/pool/main/z/zoneminder/zoneminder_1.27-1_amd64.deb
      dpkg -i zoneminder_1.27-1_amd64.deb
      apt-get -f install
      omv 4.1.12 arrakis | 64 bit | 4.15 proxmox kernel | omvextrasorg 4.1.11
      omv-extras.org plugins source code and issue tracker - github

      Please read this before posting a question and this and this for docker questions.
      Please don't PM for support... Too many PMs!
    • thx a lot -- it works!
      Server:
      Mainboard: Gigabyte GA-H97N-WIFI - CPU: Intel Core i3-4170T - CPU Kühler: EKL Alpenföhn BEN NEVIS - Gehäuse: BitFenix Prodigy ITX - RAM: 8GB Crucial Ballistix Sport DDR3-1600 -
      Netzteil: Be quiet! BN140 System Power 7 (300W) - 1x 120GB Samsung 850 Evo (System) - 2x 4TB WD Red (Data) - 1x 2TB Seagate Green (Data) - OMV: latest 2.x

      Plugins:
      Plex Media Server, RSync, JDownloader, ownCloud, eXtplorer, antivirus, autoshutdown
    • If i install and Start the Service i have 100% CPU

      Is It normal?
      Server:
      Mainboard: Gigabyte GA-H97N-WIFI - CPU: Intel Core i3-4170T - CPU Kühler: EKL Alpenföhn BEN NEVIS - Gehäuse: BitFenix Prodigy ITX - RAM: 8GB Crucial Ballistix Sport DDR3-1600 -
      Netzteil: Be quiet! BN140 System Power 7 (300W) - 1x 120GB Samsung 850 Evo (System) - 2x 4TB WD Red (Data) - 1x 2TB Seagate Green (Data) - OMV: latest 2.x

      Plugins:
      Plex Media Server, RSync, JDownloader, ownCloud, eXtplorer, antivirus, autoshutdown