Hello there!
I was successfully running an OMV installation on LGA775 hardware, which was inefficient, noisy and way too much energy consuming, so I did upgrade to a new configuration:
- Gigabyte Z97X-UD3H
- Intel i5 4460
- 1x 8GB Kingston ValueRAM
- LSI SAS 9207 8e (https://www.lsi.com/products/h…ages/lsi-sas-9207-8e.aspx)
- the same old 6x4TB WD Red I was using before, RAID 6
- Toshiba Q-Series Pro 256GB SSD for the OS
- 650W bequiet! power supply
As soon as I booted up OMV, it did start rebuilding the RAID 6 at reasonably high speed, more than 90.000K/s minimum.
It does this well until it reaches about 16% rebuild - on this point, the whole system seems to freeze, it stops being available on the network and even stops the cursor blinking on the connected monitor.
I thought the temperature of the LSI HBA could be an issue, so I did open the case and pointed a ventilator directly towards it - but nethertheless, the system keeps freezing at rebuild.
I also did boot the machine with memtest86, it completed all tests with 0 errors.
Do you have any advice for me? I'm currently pretty screwed.
Thank you so much!
Version : 1.2
Creation Time : Thu Oct 16 19:45:19 2014
Raid Level : raid6
Array Size : 15627548672 (14903.59 GiB 16002.61 GB)
Used Dev Size : 3906887168 (3725.90 GiB 4000.65 GB)
Raid Devices : 6
Total Devices : 6
Persistence : Superblock is persistent
Update Time : Tue Jun 23 19:12:32 2015
State : active, resyncing
Active Devices : 6
Working Devices : 6
Failed Devices : 0
Spare Devices : 0
Layout : left-symmetric
Chunk Size : 512K
Resync Status : 4% complete
Name : server:Storage (local to host host)
UUID : e9b390c6:0f08e3bc:048f8b9e:bb8bf889
Events : 215
Number Major Minor RaidDevice State
0 8 48 0 active sync /dev/sdd
1 8 80 1 active sync /dev/sdf
2 8 16 2 active sync /dev/sdb
3 8 96 3 active sync /dev/sdg
4 8 32 4 active sync /dev/sdc
5 8 64 5 active sync /dev/sde