openmediavault

The open network attached storage solution

News

  • New

    I have an old external HDD that i am trying to setup in OMV as a simple Samba share. I've connected it, mounted it etc, but when I navigate to it I can't see any of the existing folders or files on it. The HDD shows that it has media on it under storage.

    Is there a way I can simply inherit the existing folder/file structure into my new OMV setup? Or do I need to create new shared folders of the existing folders that are already on the HDD? If so, is there a way of listing all of the folders on the external HDD as I can no longer see them and can't remember all the of the individual names.
  • New

    Hallo,

    nachdem ich lange kein reboot gemacht hatte, und dieser mal wieder fällig war, bootete das debian 9.9 nicht mehr in die shell.
    Ich habe keinen Anhaltspunkt an was es liegen kann, folgendes kann ich nur sagen:

    Generell komme ich auf das root-Verzeichnis (Konsole) nur noch via Rescue Modus oder Grub Bash (init=/bin/bash)
    1. Es wird kein SWAP Partition gefunden. Das Anlegen einer neuer SWAP Partition mittels gparted funktioniert. Anschließend in die /etc/fstab und resume die neue UUID eintragen geht auch. Den Kernel mittels update-initframtools aktalisieren schlägt fehl. SWAP Partition in die /etc/fstab auskommentieren, ist der Fehler halt weg.
    2. Verschiedene Dienste können nicht gestartet werden
    failed to start ... rpcbind, lvm, nfs-kernel
    3. In der Rescue Shell keine Updates möglich
    "temporärer fehler bei der namensauflösung"

    sources.list mit IP-Adressen ausgetauscht, updates teilweise funktionall, aber Kernel kann nicht geupdatt werden



    Installierte Kernel

    4.19.0.0 bpo 5…

Unread Threads

Topic Replies Last Reply

How recovery RAID and filesystem without format

5

geaves

External HDD not showing existing folders

8

gderf

New approach for Raspberry Pi OMV images

223

serkan190

Docker start options

4

justtim

haugene/transmission-openvpn port forwarding problem

18

gderf

Recent Activities

  • geaves -

    Replied to the thread How recovery RAID and filesystem without format.

    Post
    Ok you have md127 running with 3 drives? what's the output of cat /proc/mdstat the inactive-array error can be resolved as well, do not reboot!
  • gderf -

    Replied to the thread OMV 5.x (development) External HDD not showing existing folders.

    Post
    Try these commands in the shell or console: cd /srv ls -al Then identify the disk you want to look into and cd into it by its name.
  • serkan190 -

    Replied to the thread New approach for Raspberry Pi OMV images.

    Post
    Quote from Adoby: “...and it can be considered a part of the normal initial installation process to update the installed version to the latest. After a successful install, update everything! Then config shares and docker and so on. Then (if not…
  • remf -

    Replied to the thread OMV 5.x (development) External HDD not showing existing folders.

    Post
    Quote from gderf: “You could use the shell to navigate to the drive and then list the folders using the ls command. I would use ls -al for an abbreviated display. Or you could install a program like Midnight Commander that makes this easier (once you…
  • keramart -

    Replied to the thread How recovery RAID and filesystem without format.

    Post
    omg ;( Any idea? connect to another machine and using some recovery hdd tools ? how connect drive from raid to osx ? mdadm --assemble --verbose --force /dev/md127 /dev/sd[ade] mdadm: Unknown keyword INACTIVE-ARRAY mdadm: Unknown keyword…
  • justtim -

    Replied to the thread OMV 4.x Docker start options.

    Post
    I'm starting to think the start options and environment variables are kicked off in the Docker run command when the container is started and are not actually stored anywhere, could that be true? Stil doesn't explain how Watchtower knows about all of them…
  • geaves -

    Replied to the thread How recovery RAID and filesystem without format.

    Post
    Ok looking at the above I can't help, whatever you have done you have successfully destroyed your data; From the mdadm conf there are 2 arrays specified md127 name=nas:127 and md126 name=nas:Raid6 mdadm --detail shows an inactive array md127 with 1…
  • gderf -

    Replied to the thread OMV 5.x (development) External HDD not showing existing folders.

    Post
    You could use the shell to navigate to the drive and then list the folders using the ls command. I would use ls -al for an abbreviated display. Or you could install a program like Midnight Commander that makes this easier (once you learn a bit of it).…
  • keramart -

    Replied to the thread How recovery RAID and filesystem without format.

    Post
    I want to repilic disk /dev/sdc Label=nas:Raid6 cat /proc/mdstat Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md127 : inactive sde[3](S) 488255512 blocks super 1.2 unused devices: <none> blkid /dev/sdb1:…
  • Adoby -

    Replied to the thread New approach for Raspberry Pi OMV images.

    Post
    ...and it can be considered a part of the normal initial installation process to update the installed version to the latest. After a successful install, update everything! Then config shares and docker and so on. Then (if not already done) backup/clone…