openmediavault

The open network attached storage solution

News

  • New

    My setup: Linux Manjaro host with OMV5 running in VirtualBox.

    Is it possible to use(pass?) a physical hard drive for data storage in OMV5 running in VirtualBox?

    If this is possible, how can I do it?

    My understanding is that if I use/pass a physical drive, I could physically remove it, install it in a different computer and all of the data would be accessible via traditional means. Is this true, or am I way out there?

    Thanks.
  • New

    Hi,
    during the setup of OMV5 i experimented with setting up multiple parallel interfaces and aggregation of e.g. 2 interfaces as a bond (aggregate). During changes e.g. from dynamic to static i often got error messages and the interfaces went down and had to bring them back up e.g. via "ip link set dev enp3s0 up".
    Just now the bond0 went down and I deleted the interface in the WebInterface - after reboot the bond of the two interfaces is still working and active - which I see at the landing page as well. But when I look into the network\interfaces page the bond0 is missing.
    When I try to setup the bond again on the webpage I can actually select the bond0 as another interaface apart to the existing ones enp1s0f0/1 which form the bond.
    Any idea which interface to select or should I just keep it as is ?

    I would love to see that the webpage of network\interfaces would actually read the current config as of the system settings e.g. "ip addr".

    Any help welcome
  • New

    Hello,

    My SSD died so I installed a new one. Running OMV 5.14

    1/ I was just planning to update the Shares entries to point to the right disk while keeping the same config but I get this: 1.txt

    2/ then I tried to delete the SMB entries first to potentially be able to recreate the Shares afterwards but I can't neither. 2.txt

    3/ Is there a cleaver way to tweak the Disk entry so the rest remains the same as the new SSD is the same sizes and I want to have it configured with the same Shares and SMB entries etc...

    Thanks
    XabiX
  • New

    Hi everybody,

    In Section 5.0.5. after installing OpenMediaVault, I am unable to upload a new plugin (the plugins I downloaded here: omv-extras.org/debian/pool/mai…nmediavault-omvextrasorg/) and will throw the following error message:

    Error #0:
    OMV\Rpc\Exception: Invalid RPC response. Please check the syslog for more information. in /usr/share/php/openmediavault/rpc/rpc.inc:187
    Stack trace:
    #0 /usr/share/php/openmediavault/rpc/proxy/json.inc(97): OMV\Rpc\Rpc::call('Plugin', 'upload', Array, Array, 3)
    #1 /var/www/openmediavault/upload.php(44): OMV\Rpc\Proxy\Json->handle()
    #2 {main}


    What could be the solution to the problem? (maybe a proxy setup error?)

    Thank you very much in advance for your answers!

Unread Threads

Topic Replies Last Reply

Help!! MySQL Problem is not installable

6

johnnymcc

AMD vs Intel for 50TB NAS build

9

subzero79

how to use(pass?) a physical hard drive for storage in OMV5 in VirtualBox on Linux Manjaro host

0

Backup solution for my PC - Plugin/Docker

18

threeeye

Aggregated Network (Bond) works but does not show up in Network/Interfaces page

0

Recent Activities

  • johnnymcc -

    Replied to the thread Help!! MySQL Problem is not installable.

    Post
    I tried the mariadb docker image and followed a step by step I found in the forum. The instructions were for a bigger job than just setting up the mariadb container, but I did just that part. It didn't work and I went back to the plugin. I tried…
  • subzero79 -

    Replied to the thread AMD vs Intel for 50TB NAS build.

    Post
    I have my eyes on this asrock mb with ipmi for amd newegg.com/amp/asrock-rack-x47…cessors/p/N82E16813140023 price has gone down a little bit since last time I checked.
  • My setup: Linux Manjaro host with OMV5 running in VirtualBox. Is it possible to use(pass?) a physical hard drive for data storage in OMV5 running in VirtualBox? If this is possible, how can I do it? My understanding is that if I use/pass a physical…
  • threeeye -

    Replied to the thread OMV 4.x Resolved Backup solution for my PC - Plugin/Docker.

    Post
    Quote from Morlan: “Which docker image do you use? ” I'm using the plugin, not Docker...
  • Tamiyo -

    Posted the thread OMV 5.x (beta) Aggregated Network (Bond) works but does not show up in Network/Interfaces page.

    Thread
    Hi, during the setup of OMV5 i experimented with setting up multiple parallel interfaces and aggregation of e.g. 2 interfaces as a bond (aggregate). During changes e.g. from dynamic to static i often got error messages and the interfaces went down and…
  • Agricola -

    Liked macom’s post in the thread 3rd-party [How-To] Nextcloud with Letsencrypt using OMV and docker-compose.

    Like (Post)
    If you get a warning in Nextcloud regarding "Strict Transport-Security" do the following: in "yourconfigfolder/letsencrypt/nginx" open ssl.conf and remove the "#" in front of #add_headerStrict-Transport-Security "max-age=63072000;
  • MikeB -

    Replied to the thread OMV 4.x Resolved System Log - Authentication token is no longer valid; new one required.

    Post
    That seems to have fixed it. Thanks for al the help.
  • HackitZ -

    Replied to the thread OMV 4.x nextcloud error updating.

    Post
    i have changed my yml file. Before i run the yml i'm going to search the folders on my main drive to see where all this data is that has filled my os drive. This is what i have run du -a /home | sort -n -r | head -n 25 ok this command is not working.…
  • Agricola -

    Replied to the thread OMV 4.x OMV - NextCloud -> Rpi4 / NanoPi.

    Post
    I am sorry. I believe I am the cause of this confusion. My comments above in this thread were incorrect. Regarding the NanoPi M4 and OMV 5 there is nothing wrong with docker or docker compose. There is a problem with docker network that can be fixed…
  • HackitZ -

    Replied to the thread OMV 4.x nextcloud error updating.

    Post
    Quote from Morlan: “Is best practice to use the definitive folder names (e.g. /srv/dev-disk-by-label-something) instead of the /sharedfolders. This way you also know where your folders really are. ” yeah i just realized you should not be using the…