openmediavault

The open network attached storage solution

News

  • New

    Hello, something happened and now I can't access NAS through SMB, it looks like it's offline but showing in "Computer->Network"

    It says System Windows cannot access \\HOSTNAME.
    Tried 2 computers.
    Connection works through IP adress (\\IP).
    NAS is set to static IP (unchanged).
    Tried to ping IP, its ok.
    Ping hostname doesn't work.
    Ping -a ip is showing right hostname.

    WHEN I EDIT HOSTS IT WORKS: IP HOSTNAME

    I don't know what to do next, I don't want to edit all hosts on every computer which connects to my network.
    Anyone can help?
    Thank you.
  • New

    I'll doing a big upgrade to my NAS this weekend.

    Currently running the following setup:
    - Asus H97M-Pro motherboard
    - Intel i3-4350 cpu
    - 24gb DDR3 RAM
    - Samsung 250gb EVO M.2 (OMV is running on this)
    - Syba 4-port PCIe SATA controller
    - x2 WD Red 4tb hdd
    - x4 WD Red 8tb hdd
    - Fractal Design Define R6 case

    New setup:
    - ASRock x399 Phantom Gaming 6 motherboard
    - AMD Threadripper 2950x cpu
    - 32gb DDR4 Corsair LPX 3200
    - x2 Samsung EVO 860 1tb SSD
    - Nvidia P2000 GPU
    Re-using from existing build:
    - Samsung 250gb EVO M.2
    - Syba 4-port PCIe SATA controller (May leave this out since I believe the new motherboard will have enough connections)
    - x2 WD Red 4tb hdd
    - x4 WD Red 8tb hdd
    - Fractal Design Define R6 case

    Wish me luck! :D
  • New

    Hello,
    I have recently discovered that my ISP is using carrier grade NAT, making the use of the DuckDNS docker spotty at best. I have a Nextcloud appliance that I would like to access through the web (uses separate internal IP), and I would like to know if is possible to access this server by connecting to OpenVPN, then port forwarding through OpenVPN to port 443 through my router, and having the router point to my internal server IP (OpenVPN Port 443--> Router port 443--> Internal server IP address)? Also, would DuckDNS be able to automatically update the VPN IP address so that the appliance can be accessed if there is a change to the VPN WAN IP address? Forgive me if I have omitted any details as I am relatively new to Linux and Networking, and basically just follow tutorials for any CLI based interactions. Currently the server is just accessed through port 443 using DuckDNS.
  • New

    Afternoon all;

    I'm pondering a new OMV build to replace my current server/storage setup (2x Dell machines running Windows 10 to support Plex and VPN/BitTorrent client dumping to an OLD Netgear ReadyNAS NVX+), and would like an outside opinion:


    MSI B365M PRO-VDH motherboard
    Intel Core i7-9700 Coffee Lake 3.6 GHz processor
    4x Corsair Vengeance 8GB DDR4-2666 memory
    8x Western Digital Red 3TB hard drives connecting through an LSI 9211 HBA (reflashed Dell PERC H200)
    2x Inland 240GB SSD drives (for OMV/Docker install)
    4 port Intel I340-T4 Gigabit Ethernet adapter
    Silverstone Strider SST-ST80F 800w power supply
    Fractal Design Node 804 case

    System will be running 2 Docker containers:

    Plex Media Server (most encodes are x265)
    Bittorrent with VPN


    So, sanity check...am I aiming too low? Too high? Am I completely out of my gourd??

Unread Threads

Topic Replies Last Reply

Cannot access NAS through Windows explorer anymore

1

Kreavan

Two shares, each on one disk, identical settings, unable to write to one

2

humerus

the contents of the shared folders do not match what I see from Windows

22

votdev

OMV for RockPro64 (and other RK3399 devices soon)

85

aldrick

OMV auf einem Raspberry Pi 4

27

omavoss

Recent Activities

  • Kreavan -

    Replied to the thread OMV 4.x Cannot access NAS through Windows explorer anymore.

    Post
    Have you flushed your dns and check for the server on your dns server to make sure it's resolving correctly. Can you reach it from another machine? This will tell you whether it's the dns server or the local machine you are on.
  • humerus -

    Replied to the thread OMV 5.x (beta) Two shares, each on one disk, identical settings, unable to write to one.

    Post
    Both drives are ext4.
  • votdev -

    Replied to the thread OMV 5.x (beta) the contents of the shared folders do not match what I see from Windows.

    Post
    See changelog
  • aldrick -

    Replied to the thread OMV for RockPro64 (and other RK3399 devices soon).

    Post
    Quote from blackride: “Quote from aldrick: “Have you read this thread ? You'll find your answer there. ” Hi, aldrick.Thank you. Quote from aldrick: “had a a RockPRO64 too. I've installed OMV 5 on it. Do you have a PCI-e to SATA plugged on it ?…
  • omavoss -

    Replied to the thread OMV auf einem Raspberry Pi 4.

    Post
    @Mike52a: Schön, dass es funktioniert. Die internationalen Tastaturbelegungen findest Du unter de.wikipedia.org/wiki/Tastaturbelegung , wenn Du an dieser Stelle einmal Schwierigkeiten haben solltest. Weitere Probleme, sofern sie irgendwann mal…
  • LMRig -

    Posted the thread OMV 4.x Cannot access NAS through Windows explorer anymore.

    Thread
    Hello, something happened and now I can't access NAS through SMB, it looks like it's offline but showing in "Computer->Network" It says System Windows cannot access \\HOSTNAME. Tried 2 computers. Connection works through IP adress (\\IP). NAS is set to…
  • RUsum1 -

    Liked nexusle’s post in the thread OMV 5.x (beta) Resolved OpenVPN can't get it up.

    Like (Post)
    Yes. SSH with putty
  • nexusle -

    Replied to the thread OMV 5.x (beta) Resolved OpenVPN can't get it up.

    Post
    Yes. SSH with putty
  • RUsum1 -

    Replied to the thread OMV 5.x (beta) Resolved OpenVPN can't get it up.

    Post
    I am on a Windows laptop trying to use OpenVPN. I know that a VPN makes your public IP address appear like it's from somewhere else. I have Windscribe free account that I use on occasion. The only reason I have OpenVPN added to my OMV server is because…
  • someuser08 -

    Replied to the thread [ITX] My personal NAS killer.

    Post
    I personally fail to see purpose of such build if the goals were to just build something faster and cheaper than 981+. Yes, its faster than j3455 that synology uses, but its barely cheaper than a used ds918+ and after a few years electricity cost will…