openmediavault

The open network attached storage solution

News

  • New

    Hi there,

    I've added a local job to Rsync a shared folder from when drive connected via USB, to another connected via USB (exact same drives) and whenever it runs at the designated time, or I trigger it manually via OMV it does no actual syncing and gives the following message:

    Source Code

    1. Please wait, syncing </srv/dev-disk-by-label-Media1/Media1/> to </srv/dev-disk-by-label-Media2/Media2> ...
    2. sending incremental file list
    3. sent 44 bytes received 12 bytes 37.33 bytes/sec
    4. total size is 0 speedup is 0.00
    5. The synchronisation has completed successfully.
    6. Done ...
    I'm able to run Rsync absolutely fine through SSH however, but ideally would like OMV to manage this.


    My job settings are as follows:

  • New

    Hi all

    I'm trying to consolidate two Pi's and need to move my PiVPN server from my debian based Pi to my OMV Pi.

    I'm able to install the PiVPN server on OMV perfectly well using the curl command on their website and I've changed the 1194 port forward from the old Pi to the OMV Pi but clients aren't able to connect.

    On the OpenVPN client logs, I can see that the hostname is resolving correctly and it is trying to connect on UDP port 1194 but the OpenVPN server on the Pi doesn't see the connection.

    I've tried to open UDP port 1194 on the OMV web GUI but still no luck.

    Any idea what I'm missing?

    TIA
  • New

    hi,

    have setup a tvheadend server via Docker to connect my avm dvb-c repeater.
    repeater got 2 tuners but will only connect one tuner to one ip address, so i would need a 2nd ip address to get both working.

    how can i realise it in omv5? or can i set a 2nd ip in the docker on any way? both must point to the same network like 192.168.178.10 and 192.168.178.11.

    thx

Unread Threads

Topic Replies Last Reply

Problem adding hardrive

4

Scorp21

apt-get update - GPG error:

5

Berti

Cant connect to OpenVpn

3

CarlB

Simple, energy efficient NAS: Rock64 vs Odroid HC2

6

kirkdis

Unable to create shares - cannot select device

3

Rafta

Recent Activities

  • Scorp21 -

    Replied to the thread Problem adding hardrive.

    Post
    I have reedit my last reply with new result of test. Do you have see it ?
  • jollyrogr -

    Replied to the thread Problem adding hardrive.

    Post
    can you login to a terminal on running OMV system? from terminal run: "blkid" without quotes and "cat /etc/fstab" without quotes.
  • Berti -

    Replied to the thread OMV 4.x Update apt-get update - GPG error:.

    Post
    Hi. No backport kernel works on the Raspi. Deactivate Backport again and it works again. Berti
  • Scorp21 -

    Replied to the thread Problem adding hardrive.

    Post
    Hello, thank's for your reply In "Initramfs" when I write "blkid" I have : /dev/sda: type="isw_raid_member" /dev/sdc :type="isw_raid_member" /dev/sdb: ptuuid="b831c3f8" pttype="dos" /dev/sdd1 : uuid =" number and letter" type "ext 4"…
  • CarlB -

    Replied to the thread OMV 5.x (beta) Cant connect to OpenVpn.

    Post
    Do you mean this thread? OpenVPN-Renew CRL If I understand correctly the plugin stop work when the certificates are revoked and they have to be updated manually. I execute openssl crl -in /etc/openvpn/pki/crl.pem -text to check my expiration date and i…
  • jollyrogr -

    Replied to the thread Problem adding hardrive.

    Post
    your system expects to boot from /dev/sda1 when you plug the sata drive in, it is becoming /dev/sda unless you hot plug it. can you paste your /etc/fstab file? and the result of 'blkid' command? your fstab should reference your boot drive using UUID…
  • anotherchris -

    Replied to the thread OMV 4.x Update apt-get update - GPG error:.

    Post
    Seems to have solved itself... I now get errors if 'ommunity-maintained updates' is not selected; all ok if selected...
  • kirkdis -

    Replied to the thread Simple, energy efficient NAS: Rock64 vs Odroid HC2.

    Post
    For my MicroNas project I bought 3 of these STEA4000400. In the expansion drive case there are whitelabeled ST4000LM024. Here in Germany prices start at 90€ each. This is the cheaper way to get the ST drives from Seagate but be aware that you loose…
  • Rafta -

    Replied to the thread OMV 3.x Resolved Unable to create shares - cannot select device.

    Post
    Problem - it is impossible to select the device on which we create the shared resource This is most likely due to the fact that on the laptop with which WD My Cloud is configured, Windows is installed. If you go over SSH to WD My Cloud and type the…
  • jackthefox -

    Posted the thread OMV 4.x Rsync only sending incremental file list.

    Thread
    Hi there, I've added a local job to Rsync a shared folder from when drive connected via USB, to another connected via USB (exact same drives) and whenever it runs at the designated time, or I trigger it manually via OMV it does no actual syncing and…