openmediavault

The open network attached storage solution

News

Unread Threads

Topic Replies Last Reply

Check Hard Drive Spin State

1

Adoby

Raspberry pi no space left on device

1

Adoby

Omv on raspberry pi 3 running out of space with error "Failed to execute operation: no space left.on device"

6

Adoby

Flash Memory Plugin

47

Adoby

Upgrade errors

4

jgeils

Recent Activities

  • Adoby -

    Replied to the thread OMV 4.x Check Hard Drive Spin State.

    Post
    Check out hdparm. Specifically "sudo hdparm -C /dev/sda". However some/sometimes HDDs can not be used with hdparm. I can't use hdparm on my Odroid HC2s with IronWolf HDDs. I go with the sound. And the short delay when accessing something on the drive…
  • Adoby -

    Replied to the thread OMV 4.x Raspberry pi no space left on device.

    Post
    What do you do when a chest of drawers is full? You tidy it up. Throw away junk. Or get a bigger chest of drawers. Exactly the same here. You have filled the sd card with stuff that doesn belong there. Except in this case it is possible that you filled…
  • I assume you are not running plex in docker... How I did it back when I used plex: 1. You shut down plex. 2. Move /var/lib/plexmediaserver to where you want it. HDD/SSD. 3. You create a symlink at /var/lib/plexmediaserver to the new location. 4. You…
  • Jacobo1223 -

    Posted the thread OMV 4.x Check Hard Drive Spin State.

    Thread
    Does anybody know how to check the Spinning state of Hard Drives ? I've set them to spin down after 10 minutes although they audibly don't sound like they spin down. I assumed the information would be In SMART but couldn't find anything ? Have I missed…
  • How do you relocate plex database?
  • orcaja -

    Posted the thread OMV 4.x Raspberry pi no space left on device.

    Thread
    I was trying to install lyche on my raspberry pi, but I got this message : "failed to register layer: Error processing tar file(exit status 1): write /usr/libexec/git-core/mergetools/codecompare: no space left on device". This is the message about my…
  • Adoby -

    Replied to the thread OMV 4.x Flash Memory Plugin.

    Post
    Quote from sweetbb: “I might even try putting in larger disks to see if it works. ” You may want to start by trying to find updated hardware compatibility lists for your NAS.
  • jgeils -

    Replied to the thread OMV 4.x Resolved Update Upgrade errors.

    Post
    I did the command you said with these results. I also asked the systems administrator to check the settings. He fixed the gateway and its happy now. Thank you. dig httpredir.debian.org ; <<>> DiG 9.10.3-P4-Debian <<>> httpredir.debian.org ;; global…
  • mopedfahrer -

    Replied to the thread OMV 4.x Update Performance decrease after patches....

    Post
    Thanks for request! Is it ok for you with the link: ix.io/1JPO
  • pseudocode -

    Replied to the thread Approved method for adding SSL chain file.

    Post
    This is an old thread but I couldn't find a response or documentation anywhere, so I wanted to point out that simply chaining the certificates in the UI now works. i.e. in the certificate section, put the site certificate, then any chained certificates…