openmediavault

The open network attached storage solution

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

News

Unread Threads

Topic Replies Last Reply

RAID 1: how recover RAID and data?

4

Judibet

Use Telegram as notification service Q&A

26

subzero79

Enough of Rpi, now what?

21

tkaiser

ServerOne Il Server NAS per Open Media Vault

16

ice.man

HDD Spindown Issues

5

ravennevar

Recent Activities

  • Judibet -

    Replied to the thread RAID 1: how recover RAID and data?.

    Post
    Quote from geaves: “What would be useful is post the information as requested here do this from the root prompt there is no need to change directory to /srv/dev/disk-by-label As a pointer /dev/md127 shows as stopped, 'if' I'm correct the entry in your…
  • Judibet -

    Replied to the thread RAID 1: how recover RAID and data?.

    Post
    Hello, RAID > 0 is used to avoid Data Lost. One drive is cloned in another. Maybe not for yourself, some of us needs RAID at home. Notice that I have professional reasons to use it at home to. Regards, Envoyé de mon SM-G935F en utilisant Tapatalk
  • subzero79 -

    Replied to the thread OMV 3.x Resolved Use Telegram as notification service Q&A.

    Post
    Doesn’t show if is executable or not. Did you put an extension to the file ? You can try running manually the file. export OMV_NOTIFICATION_SUBJECT=test export OMV_NOTIFICATION_DATE=test export OMV_NOTIFICATION_MESSAGE_FILE=test ./scriptname
  • tkaiser -

    Replied to the thread Enough of Rpi, now what?.

    Post
    Quote from geaves: “I take it from your image that is a 12V constant voltage switching power supply ” The above image with the 2 HDD is from my old office. The PSU in the back is a 5V/12V dual voltage PSU used to power - Banana Pi (5V) - the cheap
  • geaves -

    Replied to the thread Enough of Rpi, now what?.

    Post
    Quote from Mr.Grape: “A little offtop. But if we are already talking about HC1/2 and 3.5 hdd then I assume that HC1 would be able to handle 3.5 if it is done by a guerrilla method using only data sata cable and a separate power supply. Rather HC1 does…
  • tkaiser -

    Replied to the thread RAID 1: how recover RAID and data?.

    Post
    Quote from Judibet: “To avoid mistake and data lost, what please I have to do? ” Do backup the next time. RAID is not backup and no one needs RAID at home.
  • geaves -

    Replied to the thread RAID 1: how recover RAID and data?.

    Post
    What would be useful is post the information as requested here do this from the root prompt there is no need to change directory to /srv/dev/disk-by-label As a pointer /dev/md127 shows as stopped, 'if' I'm correct the entry in your mdadm.conf says spare…
  • ice.man -

    Replied to the thread ServerOne Il Server NAS per Open Media Vault.

    Post
    come ti dicevo, sto facendo piu fatica a trovare le motherboard embedded che non i case spervao di riuscire a fare un acquisto unico e comprarlo preassmblato da dover aggiungere solo le unità disco
  • ravennevar -

    Replied to the thread OMV 4.x HDD Spindown Issues.

    Post
    I installed hd-idle and set the following for all hard drives: APM - Disabled, AAM - Disabled, Spindown - Disabled, write cache - Disabled. The following was set for hd-idle: Source Code (29 lines)After reboot, the process was confirmed to be running.…
  • Nefertiti -

    Replied to the thread Cannot access web gui on new OMV_4_Raspberry_Pi_2_3_3Plus.img install.

    Post
    here what I can get using a monitor photos.app.goo.gl/SpdoaZ3c8wdc1e6T9 still cannot access it beside it I even put it on my old PI # with a new card no difference ! How can I upgrade my 3.0 installation to 4.0 since all of sudden my privileges as user…