Recent Activities

*pump*

I followed the unofficial guide to get my new OMV box setup on 4.x. I got the drive setup, did the remote mount to the share on my Synology and did an rsync of the data over. Nowe I am mapping the share from the OMV box in Windows. It maps it and I can…

metoo what kind of transmitter do you use? I have here some homematic devices with a hmlancfg ... where did you place the config-dir?

Thanks, the Video has helped. My entry at Network was wrong. I selected Bridge but Host was the correct one. Now it is working.

Hi, i`ve set up a rsync pull job to backup my webhost to my OMV box (4.1.14). It uses rsync over ssh, options are set as in the screenshot: forum.openmediavault.org/index…9a038268f345d8f092e3795d1 Every time the jobs runs the owner & group settings are…

When you did omv-firstaid Option 1 did you tell it to use dhcp? What that should have done is reset eth0 which should then have broadcast a request to the router. The alternative is to set a static IP outside of the dhcp scope on the router, but you'll…

I followed the unofficial guide to get my new OMV box setup on 4.x. I got the drive setup, did the remote mount to the share on my Synology and did an rsync of the data over. Nowe I am mapping the share from the OMV box in Windows. It maps it and I can…

@cghill It's not that Raid doesn't have a lot of love it's just there are simpler ways to do things, when it comes to this use the KISS format However, you need @flmaxey quick tag and he'll come and look he's good at recycling , but look at this

Quote from antipiot: “I would suggest to disable thoses things: wan side:A port can only be used for a device: EDIT: this is not clear: if you enable remote access to your router on port 443 then use this port in NAT. Your router will follow (i guess )…

@greaves Thank you for your reply. I read the forum post you linked and it seems that's the same issue I'm having. Perhaps I should come at this from a different angle. As I mentioned, I'm doing all this to replace an old Synology DS211j. I actually…

I got it working! Well at least the web interface is displayed

I also tried. omv-firstaid Prior to doing all the above commands.

Here is a method to update an existing cert: Get the UUID for an existing cert with: sudo omv-confdbadm read "conf.system.certificate.ssl" | jq -r '.[] | "\(.uuid) \(.comment)"' Once you have that, the following script should update it in the database.…

It's working. Thank you very much!

youtu.be/RaY72s7fOf0 Today, we install Openmediavault into our Promox server as a virtual machine.

Thank you. I will try it.

That drive is mounted noexec which breaks the transcoder. Fix it as follows: Make a backup copy of /etc/openmediavault/config.xml Edit /etc/openmediavault/config.xml and look in the <fstab> section for the <mntent> subsection that applies to that…

Quote from Pentothal: “I'm not sure I understandbut this is the activation page for remote modem access: (Hidden Content) qualsiasi WAN = any WAN abilita = enable ” I would suggest to disable thoses things: wan side: A port can only be used for a…

I think it is but I'm not a pro. Is it? Thats what written in the fstab Source Code (1 line)