Recent Activities

  • jodumont -

    Liked macom’s post in the thread Resolved OMV 4.x Why should you use or not use dockers.

    Like (Post)
  • geaves -

    Replied to the thread OMV 4.x Slow speeds.

    Post
    Quote from table681: “Okay so I finally got around to test a switch I am using netgear gs208 ” Then you're down to hardware, start with the network cables themselves particularly the one from the server to the switch.
  • Adoby -

    Replied to the thread OMV 5.x (beta) disk suddenly invisible.

    Post
    1. Turn off the NAS. 2 a. Call a friend who knows how to fix bad drives in linux, or hire a professional. or 2 b. Either boot the NAS from other media into linux and diagnose/recover the drive. or 2 c. Remove the drive and take it to some other…
  • table681 -

    Replied to the thread OMV 4.x Problems all over the place after clean install.

    Post
    just follow this, it worked for me Boot up - when the terminal stops loading the error and gives you the mdadm prompt, type 'blkid' This should show you all attached disks. You're looking for the one toward the bottom (arrarys/sata disk should be at…
  • ryecoaaron -

    Replied to the thread OMV 4.x Handbrake keeps crashing.

    Post
    Quote from table681: “is there anyway to assign each share to a different ip address? ” I don't think so. The hosts allow setting is a global setting for samba.
  • table681 -

    Replied to the thread OMV 4.x Handbrake keeps crashing.

    Post
    Quote from ryecoaaron: “There should be no load then. Not sure what is causing that. ” Okay thank so much for all the help I just have one last question is there anyway to assign each share to a different ip address?
  • dieu -

    Posted the thread OMV 5.x (beta) disk suddenly invisible.

    Thread
    hi, I have a OMV server with 7 disks and today I see that one of my disk couldn't be reached anymore. I go to webui and see (in "system file") that capacity is now "n/a" and disk is unmounted. I tried to remove the sharing and remove the drive to make…
  • agarg -

    Replied to the thread OMV 4.x Problem installing on a AMD G-T56n machine.

    Post
    I have tried OMV 5 beta as well as OMV 4 and I just wasn't successful. I suspect it may have to do with SoC AMD cpu with on chip GPU. Finally, I installed just basic Debian Stretch with no desktop or anything other than SSH Server and then used the…
  • Would you be interested in a fully integrated installation ISO that includes Debian 9 and OMV? -> ISO. (Otherwise) __________________________________________________________ Apt-get doesn't work (correctly) Install Debian 9 as you did before. …
  • i buddies! I have issues installing openmediavault. Can any one help me? I have followed the instructions as on this forum , when I get to execute the installation command it…
  • cabrio_leo -

    Replied to the thread OMV 4.x ZFS to use more than 50% ram?.

    Post
    1 Add this line to /etc/modprobe.d/zfs.conf options zfs zfs_arc_max=<new size in Byte> 2. Save the file and reboot 3. You can check the current value of 'zfs_arc_max' here /sys/module/zfs/parameter/zfs_arc_max 4. The run-time usage of the ARC can be…
  • cj2tech -

    Replied to the thread OMV 4.x blank OMV 4 - can't access from the outside.

    Post
    Quote from houndhunger: “I tested it with new OMV4 - IT WORKS! I have defined problem: Before setting VPN I have followed this video tutorial for docker which interacted with some things which I don't understand clearly: How to Install Transmission with
  • table681 -

    Replied to the thread OMV 4.x Slow speeds.

    Post
    Quote from geaves: “Not worth the effort! I'm guessing you are in the UK as you are using a Plusnet Hub One, this is nothing more than a rebadged BT Home Hub 5, I have been a BT customer for longer than I can remember. These hub's are what they are,…
  • ryecoaaron -

    Replied to the thread OMV 4.x Handbrake keeps crashing.

    Post
    Quote from table681: “All my MAC (the client) was doing was connecting to the machine nothing else. ” There should be no load then. Not sure what is causing that.
  • gderf -

    Replied to the thread OMV 4.x Guide for Setting Remote Management.

    Post
    I already have a very capable router, I don't need to turn my OMV machine into another one. From my perspective, given the choice between running a VPN solution on the router or running it on a LAN machine, best practice would be to run it on the…
  • table681 -

    Replied to the thread OMV 4.x Handbrake keeps crashing.

    Post
    Quote from ryecoaaron: “So, that isn't while you are transferring files? Is the client running a virus scan on the share? ” All my MAC (the client) was doing was connecting to the machine nothing else.
  • geaves -

    Replied to the thread OMV 5.x (beta) Portainer.

    Post
    Quote from ryecoaaron: “It also doesn't have as many features. ” I would agree but a new user could look at portainer and it appear rather daunting compared to the current plugin, but with Cockpit you get 2 for 1 :)
  • geaves -

    Liked ryecoaaron’s post in the thread OMV 5.x (beta) Portainer.

    Like (Post)
    Quote from geaves: “I was looking more at the KIS principle, ” I just pushed omv-extras 5.0.4 to the repo and now you can select if you want portainer and/or cockpit. Quote from geaves: “But I thought about Cockpit in regards to VM installs as well…
  • happyreacer -

    Liked Agricola’s post in the thread OMV 5.x (beta) Portainer/Docker.

    Like (Post)
    Quote from @happyreacer: “but... it is difficould for me to manage nginx sides with a letsencrypt cert. ” Well now, I haven’t tried the remote side to Nextcloud yet. I know it was a bear in omv4. I’m waiting for omv5 to come out of beta and my…