Search Results

Search results 1-20 of 1,000. There are more results available, please enhance your search parameters.

  • Is the drive you moved the Docker Base Path to mounted exec enabled? The default for OMV is to mount data drives noexec.

  • Docker GUI plugin now stable

    gderf - - Plugins

    Post

    Quote from Blabla: “Or you will suggest to just install it using the official guide? Also: there is some way to manage my already running container with portainer? ” Well, portainer is available as a docker. Install it that way. From what I have seen of Portainer, existing containers are imported into it. But unless I am missing something, I am unable to edit the Environment Variables or Volumes and Bind Mounts of those imported containers.

  • General advice for NAS/file server

    gderf - - My NAS Build

    Post

    Quote from ThomasH: “It was my understanding that SnapRAID was some variation of RAID4, but I could be mistaken. ” You are mistaken. There is no striping involved and the parity creation is not done continuously on the fly, only on demand.

  • mellanox connectX3 card help

    gderf - - Network

    Post

    Quote from patman2097: “Is there a list of guranteed mellanox supported devices for OMV?? Can user here suggest some card models that work, there are so many diifernt model numbers on the market ” As already stated the most popular devices are supported out of the box. Those that aren't will require a driver. Your best be will be to use an Intel NIC, but always determine which driver it needs and verify that the underlying version of Debian that OMV uses provides it, if not verify Intel has the …

  • Most VPN providers also provide a Socks5 proxy. NordVPN does too, so why don't you use it with a torrent client that supports it? nordvpn.com/tutorials/socks5/

  • Did you compare the permissions and ownerships?

  • IIRC, changing the docker base path automatically copies all the files and directories from the existing base path to the new base path. This can take some time. Once this operation is complete docker should restart and be running in the new base path. I do not think that anything is done with the files and directories in the old base path. You will have to delete them yourself after verifying that all your containers are working properly. You don't say how you copied the docker folder, but if t…

  • mellanox connectX3 card help

    gderf - - Network

    Post

    Have you looked around on the maker's web site?

  • Quote from TechnoDadLife: “Quote from gderf: “As I said, this does not prevent those same ports from working on IPv4. Also, your VPN provider must support port forwarding if that is what you are trying to do. Not all VPN providers support this. From nordvpn.com/blog/port-forwarding/ Does port forwarding work with a VPN? Port forwarding and triggering could work with a VPN protocol in general, but not with NordVPN. ” I use port forwarding with Nordvpn. Port forwarding is just dependent on your in…

  • SNMP to read temperatures

    gderf - - SNMP

    Post

    As I keep saying, it's all about the MIBs. You should read up on how SNMP works and then get a hold of the MIB file you need to make this work. Your board vendor should be able to help. net-snmp.sourceforge.net/wiki/…UT:Using_and_loading_MIBS supermicro.com/products/accessories/software/SNMP.cfm

  • As I said, this does not prevent those same ports from working on IPv4. Also, your VPN provider must support port forwarding if that is what you are trying to do. Not all VPN providers support this. From nordvpn.com/blog/port-forwarding/ Does port forwarding work with a VPN? Port forwarding and triggering could work with a VPN protocol in general, but not with NordVPN.

  • The IPv6 and IPv4 stacks are separate. Something binding to a port on one stack does not prevent something from binding to the same port on the other stack.

  • You could use Midnight Commander from a shell on the OMV box with a shell link, ftp link, or sftp link to the remote site.

  • Quote from gabs247: “Conversion failed. The transcoder exited due to an error. ” The problem is that the location of your /config for the container is on a drive that is not mounted exec capable. This is the default for all data drives in OMV. If you examine your /etc/fstab file you will see this in the mount options as "noexec". A temporary fix is to edit fstab changing noexec to exec and rebooting. However, this change will be reverted by OMV when certain configuration changes are made in the …

  • SNMP to read temperatures

    gderf - - SNMP

    Post

    As I said. If they are not in the MIB they are not supported by SNMP.

  • Changing the amount of reserved space on a drive does not change the reporting via monitoring. You have to raise the threshold there too to make the warnings go away. forum.openmediavault.org/index…-filesystem-notification/

  • unable to install usb wifi adapter

    gderf - - General

    Post

    You have no working DNS or no internet connection.

  • You are confused. SnapRAID doesn't combine disks. If you are spinning down disks, then expect delays accessing data on disks that must be spun up.

  • SNMP to read temperatures

    gderf - - SNMP

    Post

    To fix the python error see: Random errors - Are they harmful? The SNMP MIBs you are using would have to have OIDs for the SMART and temperature data you are trying to read. Walking the tree and not finding them says they are not supported.

  • Read only file system after flash plugin

    gderf - - General

    Post

    Run this command in the shell, then you should be able to edit the file. sudo mount -o remount, rw /