Search Results

Search results 1-20 of 1,000. There are more results available, please enhance your search parameters.

  • Can't install OMV on NanoPi M4

    tkaiser - - General

    Post

    Quote from crashtest: “The power cable used could be 3 meters long. Also, the user clearly stated that it was working, it failed, and a reinstall didn't work ” Total BS as usual. - The RPi USB-C PSU has a fixed cable and the length is sufficient for no voltage drops to occur even at 3A (of course I tested this the day I got my RPi USB-C PSU several weeks ago) - This new PSU has been bought later on - The user was confused about missing HDMI output which is to be expected with the image since I c…

  • Help Me Please! Proxmox and OMV Raid

    tkaiser - - General

    Post

    Quote from crashtest: “So what's this all "snapshot/symbolic links" about on githut? Here's another. Oh, that couldn't be true, uh? Everyone must be wrong, right? There's no problem there, no symlinks involved in snapshots - everyone must "imagining" the symbolic link error. ” Since I still believe in human beings being able to stop their idiotic behavior and being able to learn I explain the basics to you one last time (like I did it the last years over and over again): What you are referring t…

  • Can't install OMV on NanoPi M4

    tkaiser - - General

    Post

    Quote from ivan.vaskevych: “It seems that the OMV image doesn't allow ssh out of the box ” The readme.txt at download location still fully applies: sourceforge.net/projects/openm…ngle%20Board%20Computers/ Quote from ivan.vaskevych: “under-voltage shouldn't be an issue, though still can be if the image overclocks out of the box ” If you use the official RPi USB PSU this can't be an issue. At least without any USB drives connected at install time. You can simply access the web interface by using t…

  • Quote from ManuelM: “For me there where two bugs in this image: the virtual host config had a bad syntax and ntfs donßt work ” There are certain problematic bits in this image I won't fix since too annoyed by several forum members but what you experience is what an awful lot of RPi users not able to follow the readme.txt at the download location also experience. The image needs working Internet access on first boot otherwise OMV installation will not be finalized. If users follow the readme ever…

  • Quote from ManuelM: “I get this two errors in the Raspberry Pi 4 image on sourceforge ” There's nothing wrong with the image, you simply didn't follow the readme.txt at the download location. The image needs working Internet access on first boot otherwise OMV installation will not be finalized.

  • Quote from crashtest: “SMART attributes can increment with no user scheduled tests at all ” Exactly. But the context was your wrong believe that a short test could help increasing these SMART values which is not the case: Quote from crashtest: “I do a short test on all drives once a week, afterhours. I believe that's enough to increment the counts on the "maybe it's time to worry" SMART attributes ” Again: for this only a long test is sufficient since it's about to tell the drive controller to s…

  • Help Me Please! Proxmox and OMV Raid

    tkaiser - - General

    Post

    Quote from crashtest: “Given the symbolic links that are used in snapshots, running a CoW filesystem inside of another CoW filesystem (which is snapshot capable) may be asking for trouble. There's a limit to the levels of symbolic links allowed, where a second set of symbolic links and deeply nested files may push beyond the limit ” The usual insane @crashtest BS (as almost always unfortunately). You have not the slightest idea what you're babbling about. Snapshots in ZFS and btrfs are not based…

  • User can only access one share

    tkaiser - - AFP

    Post

    Quote from crashtest: “And the amazing part of it is, while this is your thread, your issue won't even be considered and real help is unlikely to be offered ” The usual @crashtest BS. You are still not able to realize how OMV defaults work. I addressed all the issues @jgbrock has in one post above and the BS you originate in another comment. But most probably now you're playing your usual idiotic games, started a personal conversation with the affected user trying to agitate him and so on. The u…

  • Can't install OMV on NanoPi M4

    tkaiser - - General

    Post

    Quote from ivan.vaskevych: “No HDMI output ” If you do a simple web search for No HDMI output nanopi m4 you end up here: Nanopi M4 OMV HDMI not working -- no HDMI output is to be expected with the image, simply use it headless (and after applying all updates you get HDMI output). Quote from crashtest: “With a good 3 Amp PS and a typical 1 meter USB cable (which has thin gauge wires), under-voltage messages are noted in dmesg ” The usual @crashtest BS as almost always. The NanoPi M4 is not a Rasp…

  • Quote from ryecoaaron: “Why didn't you just say "Can you upload this to SF?" ” How could I ask you for anything? According to reason N°1 why I won't continue contributing to OMV I'm just some random forum user and not the creator and maintainer of the current RPi image. Also the image is 'BETA', everything is expected to be broken and OMV-Extras is not ready yet! It's not that I just carefully added the few bits to provide hardware support for the RPi 4 and a maintained kernel and everything els…

  • Quote from ryecoaaron: “You keep saying your image is going away ” Those transfer.sh links usually are only valid for 14 days. The first attempt to add RPi 4 hardware support is already gone: transfer.sh/wKK4S/OMV_4_Raspberry_Pi_2_3_3Plus_4.img.xz Well, if you think throwing the work into the bin is the better idea compared to uploading it to SF...

  • Quote from ryecoaaron: “Read what I said. I didn't say it had anything to do with OMV 5.x. I said I don't want to do it. I mentioned OMV 5.x because it is more important for me to spend my time on it and I don't even want to do that. ” Sorry, English is not my mother tongue. Anyway this New approach for Raspberry Pi OMV images still applies.

  • BTRFS system

    tkaiser - - RAID

    Post

    Quote from ness1602: “By default, metadata will be mirrored across two devices and data will be striped across all of the devices present. This is equivalent to mkfs.btrfs -m raid1 -d raid0. btrfs.wiki.kernel.org/index.ph…rfs_with_Multiple_Devices ” Nope, that's about btrfs behavior with multiple devices without RAID. I linked to github.com/openmediavault/open…01#issuecomment-467000104 above for a reason. Since there everything is explained by a kernel developer in the link provided there: mail-…

  • Quote from ryecoaaron: “I barely want to do anything with OMV 5.x stuff let alone more hacks specifically for the RPi ” Final remark: This is not about OMV 5. This is about support for the existing OMV user base on any of the Raspberry Pi variants from 2 to 4.

  • So, let's outline what's necessary with OMV on the RPi. For any other developer willing to waste his time in this idiotic/toxic environment here this might save you at least some initial time... Situation as follows: 1. RPi Trading Ltd. switched their official support away from Debian Stretch to Debian Buster some weeks ago. This not only affects Raspbian users but also 'consumers' of their kernel like OMV. Our approach is to combine a rather clean upstream Debian armhf userland (created by the …

  • raspberry pi 4 install?

    tkaiser - - General

    Post

    Quote from crashtest: “The image is not my creation. (It's the product of a forum SBC savant.) The purpose of it was for testing but, again, it may work for you. I simply provided a link to the image because time is short ” You really can't stop your idiotic behavior, right? @ReonBalisty: the image @crashtest linked to is from here: New approach for Raspberry Pi OMV images It's the official RPi image with added hardware support for the RPi 4 and an adjustment allowing to combine our userland (De…

  • BTRFS system

    tkaiser - - RAID

    Post

    Quote from crashtest: “mkfs.btrfs -f -d raid5 /dev/sdb /dev/sdc /dev/sdd ” BS advice as almost always. I explained to you (flmaxey) and others already over at 'this thread' that adding -m raid1 is the way to go since this will protect metadata or 'the filesystem itself'. You should really start to learn at least the basics.

  • Quote from crashtest: “I do a short test on all drives once a week, afterhours. I believe that's enough to increment the counts on the "maybe it's time to worry" SMART attributes ” Wrong. If you want to increase «the counts on the "maybe it's time to worry" SMART attributes» you need to run a long test. The difference is - short test: tests electronics (vendor specific), servos/motors (vendor specific), does some limited surface tests, finishes within 2 minutes - long test: the 2 min limitation …

  • User can only access one share

    tkaiser - - AFP

    Post

    Quote from crashtest: “I'm going to assume that the usernames and passwords that you entered into OMV, for you and your wife, are identical - cap's and all, to the usernames and passwords that you're using to logon to your clients. If they're not the same, make them the same, and be sure to access shares from those same clients. ” The usual @crashtest BS 'advice'. I still hope that one day you will stop your idiotic behavior refusing to learn so one more time: this is not necessary on any OS. Fo…

  • User can only access one share

    tkaiser - - AFP

    Post

    Quote from jgbrock: “I decided to try using Apple Filing instead of Samba (mostly because Samba never seems to be very stable... ” Samba is stable, if you run into issues on an RPi you should be aware that it's almost always either power supply or SD card related (search the forums, especially read the threads that are linked to from the readme.txt at the download location). As for your issues: OMV ships with sane defaults. You can create two or more users and OMV takes care that they're all mem…