Search Results

Search results 1-20 of 1,000. There are more results available, please enhance your search parameters.

  • Guide for Setting Remote Management

    gderf - - General

    Post

    I already have a very capable router, I don't need to turn my OMV machine into another one. From my perspective, given the choice between running a VPN solution on the router or running it on a LAN machine, best practice would be to run it on the router. As for your desire to use an SSL certificate for connection to OMV, it won't hurt anything. But you already have end to end encryption being provided by OpenVPN. And as I previously suggested, an SSH tunnel would have provided a one line shell c…

  • Guide for Setting Remote Management

    gderf - - General

    Post

    In your VPN settings under routing you have 172.17.0.0/16. Where did that come from? I would have the private network of the machine there. But I do not use this VPN setup myself. If I needed inward VPN access to my network, it would be running on the router.

  • Guide for Setting Remote Management

    gderf - - General

    Post

    You need to be using the same exact URL address that you would use when connecting from your LAN. Obfuscating private IP address with x.x is pointless, so stop doing that. You are trying this from another network such as a cell phone, right? If you can not ping your OMV private IP address thru the VPN, then something is wrong with a configuration. Did you set a port forward for the VPN in your router? If needed to to connect to my OMV web admin page from another network (and I don't need to do t…

  • Guide for Setting Remote Management

    gderf - - General

    Post

    To connect to your OMV via an OpenVPN connection, you need to use the local, private IP address of your OMV machine once you have established the VPN connection. Using the WAN address that your OMV is connected to, or any domain name that resolves to that address is incorrect.

  • The answer to your question is in the documentation for the docker.

  • Make sure that the drive pointed to by the container's /config Volume or Bind mount is mounted exec capable.

  • Portainer/Docker

    gderf - - General

    Post

    Quote from mig67: “I managed to install Plex but I can't insert the right folders. I have seen that in Portainer I can only see the files in /var/lib/docker/volumes/ while I would like to see those found in /sharedfolders/media. ” If you specify a Volume, Portainer will show a drop-down list of volumes that have hashes for their names. These are the ones in your /var/lib/docker/volumes/ and you already know about this. If you specify a Bind, Portainer will display a Host path box. You will have …

  • Provide a link to the plugin you can't get to work and I'll look at it here in my docker. Also state which Deluge image you are using.

  • Clone Micro SD card fails

    gderf - - Updates/Upgrades

    Post

    Quote from Thomas126: “Is there a way to acces the backup dd file to acces the file system? ” unix.stackexchange.com/questio…n-from-a-full-drive-image

  • Quote from ebretteville: “Quote from gderf: “I upgraded these two packages from buster. No problems. collectd 5.8.1-1.3 collectd-core 5.8.1-1.3 ” Hye, how did you do that? With mgruber4 instructions? Thanks ” I downloaded the packages from Debian buster and installed them with dpkg. Simple. packages.debian.org/buster/collectd packages.debian.org/buster/collectd-core

  • Help setting up FreshRSS Docker, please

    gderf - - Docker

    Post

    For future reference you can not define a network port in the environment table.

  • If you can't get Deluge to upload the eggs, then place the files yourself. Look in your config directory for the plugins folder. Also, any eggs you use must be of the same python version used by the container.

  • OMV 5.0.5 released????

    gderf - - General

    Post

    Quote from Morne: “Can you upgrade from the older version to the latest version ” I don't think so, not yet anyway. The command to upgrade from OMV 3 to OMV 4 (omv-release-upgrade) is not available in OMV 4. I suppose it could appear at a later date via some update.

  • I upgraded these two packages from buster. No problems. collectd 5.8.1-1.3 collectd-core 5.8.1-1.3

  • Error when access Snapraid plugin

    gderf - - General

    Post

    Quote from ryecoaaron: “Quote from gderf: “How does one NOT have: ” Please don't make me change the plugin again... There is no way to get rid of it - code - without me changing the plugin. Can you tell me why you would want to keep a dynamically generated file that is backed up by the plugin and the backup can be removed from exclusion list by editing /etc/default/openmediavault-snapraid? ” SnapRAID places a copy of snapraid.conf in the root of every data drive. What is the point of placing thi…

  • Error when access Snapraid plugin

    gderf - - General

    Post

    How does one NOT have: exclude /snapraid.conf* appear in the conf file? It seems to be put there automatically.

  • Error when access Snapraid plugin

    gderf - - General

    Post

    There are other problems. According to the changelog the update was to provide a default excludes file: openmediavault-snapraid (3.7.4) stable; urgency=low * Add default file for excludes but since the upgrade throws errors and doesn't seem to complete successfully the file never gets added.

  • Error when access Snapraid plugin

    gderf - - General

    Post

    I did check my snapraid.conf file. It was not touched in any way. All the exclusions, including those I added myself are still there.

  • Error when access Snapraid plugin

    gderf - - General

    Post

    Upgrading did not replace or otherwise damage my /etc/snapraid.conf and /etc/snapraid-diff.conf files. Here are the contents on my snapraid-diff.conf file. (Forum software would not allow me to upload the file itself.) Source Code (11 lines)

  • Error when access Snapraid plugin

    gderf - - General

    Post

    Confirmed. And downgrading back to 3.7.3 does not solve it.