Search Results

Search results 1-11 of 11.

  • If you're using a subdomain other than "nextcloud" then you will also need to: Edit nextcloud.subdomain.conf which is found in /srv/dev-disk-by-label-disk1/appdata/letsencrypt/nginx/proxy-confs (Change 'disk1' in the path to match your disk name.) Change server_name nextcloud.*; to server_name yoursubdomain.*; where "yoursubdomain" is whatever subdomain you've chosen. For example, I wanted NextCloud to be accessible at cloud.mysite.com, so I changed the line to become server_name cloud.*;. You c…

  • Firstly, I have to say this is an excellent guide. Thanks very much for putting it all together and posting it. I'm impressed and grateful. I followed the guide with the following modifications: - The URL for letsencrypt was changed to cloud.mydomain.com. I added no subdomains. This is because mydomain.com is hosted by my ISP. - I added the internal IP of my server to the config.php file so that I could get to nextcloud internally via xxx.xxx.xxx.xxx:445. This works okay. - I used the modificati…

  • Problems after upgrading to PHP7.3

    Kritta - - General

    Post

    Quote from ryecoaaron: “OMV 4.x will never work with php7.3. OMV 5.x does work with php7.3 but not 7.0. ” That's very clear and very helpful, and I think it will save me (and, I suspect, many others) a lot of time and hassle. Thank you very much.

  • Problems after upgrading to PHP7.3

    Kritta - - General

    Post

    After I installed OMV, I came to this forum, searched for "install nextcloud" and I followed the guide that resulted. How was I supposed to know it was the "wrong guide"? (See the note below about that wording.) If it's so wrong, why not remove it? Saying that I should use Docker is helpful if I were to start over again, but it's not an answer to my question and it's no help to me, or anyone who followed the guide I've linked to. It seems you're being really unhelpful and rude to someone who has…

  • Problems after upgrading to PHP7.3

    Kritta - - General

    Post

    I am not missing the point of Docker. I get it. But Docker was not a part of the guide that I followed. As I said, it would have been great if the Docker advice had been included in that guide. But it was not. And now I have NextCloud installed without Docker. Saying that I ought to have used Docker is not helpful at this point.

  • Problems after upgrading to PHP7.3

    Kritta - - General

    Post

    I had set up OMV and installed NextCloud using a guide on this forum: NextCloud Instalation. It did not employ Docker. I don't want to revert to PHP7.0 because it means I cannot use the latest version of NextCloud. I'd like to understand why OMV is having this problem, and how to resolve it. I'm sure there are plenty of others who may have followed the same guide linked above, and are now in a similar situation. We follow the guide to installing NextCloud as is published in this forum, and then …

  • Problems after upgrading to PHP7.3

    Kritta - - General

    Post

    I've upgraded to PHP7.3 and run into trouble with OMV. I can get the login page displayed, but after entering my credentials I get an error: Source Code (10 lines) Running from the command line interface omv-engined -dI get: Source Code (230 lines)My php -modules are: Source Code (61 lines)I wanted to upgrade PHP to enable me to use the latest updates to NextCloud. I previously had NextCloud running (without using Docker) and was happy with the setup. NextCloud started nagging about an upgrade, …

  • Back to the original topic: You can put the 'location' block inside the 'server' block... so you can just paste the location block in the extra options within the OMV/nginx add/edit server pop-up. What does become a problem is that you cannot have more than one server listening on the same port. While this is possible in nginx (as long as only one is the default server), the OMV interface does not allow it.

  • Filesystem "missing" after reboot.

    Kritta - - General

    Post

    I recently shut down OMV, removed the SD card (that it boots from) to create an image of it, and then put it back and re-started. In addition to the SD card, there is a 8TB USB 3 drive attached. Upon re-start this drive did not mount, and I can't work out how to mount it. The disk appears on the Storage/Disks page of the OMV interface: Device: /dev/sda Model: USB 3.0 Serial Number: (is present) Vendor: N/A Capicity: 7.28TiB On the Storage/File Systems page I have the SD card (two partitions are …

  • I did exactly that recently. Pi to Odroid XU4. I started from scratch, downloaded the Odroid image of OMV, and it was a breeze. I'm sure you'll see a big performance improvement.

  • NGINX Reverse proxy + vitual hosts

    Kritta - - Plugins

    Post

    I'm trying to set up a reverse proxy so that subdomain.mydomain.com is redirected to another computer on my internal network. I have a router that directs external requests on port 80 and 443 to my OMV/Nextcloud server. This works fine. I have subdomain.mydomain.com set up correctly in the DNS. Browsing to it currently connect to my OMV/nextcloud server. I am trying to configure a file in nginx that will achieve the reverse proxy. I have tried adding the following code both to the end of the ope…