Search Results

Search results 1-18 of 18.

  • HPE Proliant Servers

    mika91 - - My NAS Build

    Post

    Hi, Just received my Gen8. I planned to install OMV on SSD, and use ODD sata, but after some research this morning, it seems impossible to properly boot from port5. My data disks will not be in a RAID (I'm using snapraid), and forcing SSD boot with raid 0 trick is not reliable for me, if a reboot / cold boot is not possible. So what are the possible solutions ? - install omv on USB (+SSD for data)? - install omv on sd card (+SSD for data)? - use USB only for boot partition, and keep other instal…

  • omv 4?

    mika91 - - General

    Post

    Quote from henfri: “Hello, Quote from apa: “Several of these RRDCacheD errors in syslog when booting: Oct 7 10:03:56 Sirius collectd[983]: rrdcached plugin: Failed to connect to RRDCacheD at unix:/var/run/rrdcached.sock: Unable to connect to rrdcached: No such file or directory (status=2) Tried, this: omv-mkconf collectd omv-mkconf rrdcached reboot No luck. Then tried the following: rm -r /var/lib/rrdcached/db/localhost rm /var/lib/rrdcached/journal/* service collectd restart service rrdcached r…

  • Hello, I'm trying to setup the kodi docker, but I'm lost. I don't understand how to configure, and how it'll work. My OMV box ip is 192.168.1.10, with sql server running on it and only samba shares. - Network mode: bridge or host? - MYSQLip: 127.0.0.1, 192.168.1.10 or 10.10.10.12 ? - How to add my libraries paths ?- in the portable_data/sources.xml ? - with something like smb://192.168.1.10/Movies ? (same question as bellow, should I use 192.168.1.10, 127.0.0.1 or 10.10.10.12?) - where should I …

  • change system drive

    mika91 - - General

    Post

    I finaly succeeded to clone my system disk to a smaller one. Acronis is simplier to use, but unfortunally it looses the partitions UUID. (at least for version 2014) So I give clonezilla a try, with success! Here are the steps: - Boot with Gparted Live to shrink partitions such that they will fit on the new drive - Boot with CloneZilla:- choose "device-device clone" - select the advanced options, let default options and enable the -icds - process - eventually boot on gparted to extend partitions …

  • change system drive

    mika91 - - General

    Post

    Hi, I've planned to replace my SSD system drive by a smaller one. There are two partions on it: 20GB system + 200GB DATA (for download managers, emby, plex and mysql) I'll use acronis true image to clone the disk, but what about partitions uuid ? they will remain the same, no need to change fstab or anything else? thanks

  • Help to backup running rpi on my NAS.

    mika91 - - General

    Post

    Quote from ryecoaaron: “For the OS: openmediavault-backup It only keeps one backup but rsnapshot fixes. Unless you make nightly changes or really need your logs, you don't need nightly backups either. You can schedule it in Scheduled Tasks with the command: omv-mkconf backup backup as root. Restoring isn't as easy but you can worry about that when you need it. For data: openmediavault-rsnapshot Keeps lots of backups and is scheduled but is for data only. ” Hi. I'm not sure to understand sorry. M…

  • Help to backup running rpi on my NAS.

    mika91 - - General

    Post

    Hi, I'd like to automate the backup of my multiple raspberry pi (osmc, teleinfo, home-automation, ...). Some of them are not easily accessible, so unplug the sd card and make an iso image is not a convenent way to go. I've googled for such a solution, and found post about "dd over ssh" or "rsync". But I think it's over my competences, so need a little help The best would be to make incremental image backups every nights. The rpi image/filesystems will not change a lot (except logs, some local DB…

  • docker and sickbeard issue

    mika91 - - Plugins

    Post

    same here!

  • Pyload doesn't work

    mika91 - - Plugins

    Post

    Quote: “ I want to install and use pyload (after I have no idea how I can access to the jdownloader). the installation went well but when I open the pyload Tab, i get "Critical error while processing request: "And the Tab-Window in OMV doesn't show anything. ” Same here

  • SnapRaid 8 - best way to automate

    mika91 - - Plugins

    Post

    Hi, I'm interrested in the snapraid automation too. So I have to add a cron job, and run omv-snapraid-diff script? But what is the meaning of the script update parameter in that case (default 7 days)?

  • ok, thanks for the response. I think I will go with a "/" share to the admin. I'll also investigate JDownloader and see if there is a plugin to move completed downloads to another folder, according to user defined tags (like utorrent)

  • I just made a quick test. samba overrides sub-folder privileges. My [DATA] share has Read/Write privileges for all users, and [Videos] only Read. When I access videos folder via \\OMV\DATA\Videos, I can make write operations! But using \\OMV\Videos, only read permissions. So sharing the whole [DATA] folder is dangerous. Maybe make it hidden, just for maintenance stuffs...

  • Hi, I'm installing a new OMV nas for a friend, and I have to decide about the way data will be stored. It has to be user-friendly, and completly transparent for beginners user (no SSH, no FTP, ... only windows samba shares) The NAS is build of 1x SSD 256GB and 4x HDD 3TB. I partionned the SSD to a 30GB system partition (OMV_OS), and the remain space to another partition (OMV_DATA) OMV_DATA partition is used mainly for Deluge/PyLoad downloading and seeding directory, and temporary folder. Each HD…

  • [HowTo] SnapRAID in OMV

    mika91 - - Plugins

    Post

    Hi, So do we have to add snapraid-diff in the schedule tasks? Because today I have a 7 day frequency, but nothing happens in the syslog or mail since the 17 july. Thanks

  • Ok, So I achieve a 12W build yesterday! Just apply the given tweaks in OP, with 3.16 backport kernel and powertop tune. The only change I made is re-enable WOL (12.5W), to use autoshutdown. Now I'm fully happy! OMV is really a great OS for NAS.

  • Hi, I successfully migrated my NAs from whs2011 to OMV two weeks ago. Everything is configured and working great (smb, sickbeard, deluge, ....) and now I'm trying to lower idle power consumption. My setup is: asrock z87E-ITX + Pentium G1820 + 4Go RAM 1.35v + SSD + 3x WD red 3To + 1x 1T0 5400rpm Currently with OMV, it is 17W when disks are spindown: it's not bad, but I'm perfectionist My idle power usage was around 12W in windows. I check with powertop, 98% of the time in C6 but I can't hear the …

  • Pool solution choice?

    mika91 - - General

    Post

    Hi, Thanks for the answers. In my movies collections, I have a lot of full DVD rips, with their original VIDEO_TS folder and multiple vob files inside. I need to make sure that all vob of the same movies are on the same physical disk. So I need a sort of split-level as unraid. Didn't see anything on aufs or mhddfs

  • Pool solution choice?

    mika91 - - General

    Post

    Hi, I want to migrate my whs2011 sevrer to a OMV nas. I'll use Snapraid plugin, as I'm fully satisfied with its features. aufs and mhddfs, seems to be good candidates for pooling. I need:- No single-file spreading (each disk must be fully readable if the pool fail) - Usable (read/write) from NFS AND Samba shares. - split-level, as unraid feature (link). The idea is to avoid multi disk spinning when playing a DVD or Bluray Rip. Thanks