Search Results

Search results 1-20 of 31.

  • Orange pi 3

    michelefaccini - - General

    Post

    what about Opi 3 downloadable images ? Can I install OMV as an addon if I download debian server jessie ? Is it then upgradable to debian stretch ?

  • Orange pi 3

    michelefaccini - - General

    Post

    my intention was to connect to the PCIe a solid state disk and use the orange pi as a webserver

  • Orange pi 3

    michelefaccini - - General

    Post

    Why so do they sell such a board with fake hardware...it's illegal !!!!

  • Orange pi 3

    michelefaccini - - General

    Post

    Funny answer but useless... See the following link linux-sunxi.org/Linux_mainlining_effort#cite_note-h6-pcie-4 Found on orangepi forum : Allwinner H6 ,which is the orangepi 3 cpu, has a quirky PCIe controller that doesn't map the PCIe address space properly to CPU, and accessing the PCIe config space, IO space or memory space will need to be wrapped. As Linux doesn't wrap PCIe memory space access, it's not possible to do a proper PCIe controller driver for H6. The BSP kernel modifies the driver …

  • Orange pi 3

    michelefaccini - - General

    Post

    Hi all,I've just bought the very new Orange Pi 3 and need some advices to install the OS and OMV4.Thanks !!!

  • Apache

    michelefaccini - - Plugins

    Post

    Thanks for your time and answer ! Is there a performance difference between apache and apache dockerized ?

  • Apache

    michelefaccini - - Plugins

    Post

    Ok thanks,I have it running but I have to say that it is too complicated for me : I found the httpd.conf file under /var/lib/docker/overlay2/long id/merged/usr/local/apache2/conf/ Now I have to modify the DocumentRoot ( which is actually "/usr/local/apache2/htdocs" ) to /sharedfolders/sito2 ( where I have my php files ) but I don't know how to do that because /usr/local/apache2/htdocs is referred to the docker image. Can I just install apache without docker ? Isn't better and easier for a newbie…

  • Apache

    michelefaccini - - Plugins

    Post

    Hi all, I'm hosting my website with Nginx server and MySQL installed on a Raspberry pi 3B+; my OMV is version 4. Because some scripts run only on apache server, I need to install apache but I saw that there is no Docker arm container for apache. What do you suggest to do ? Please point me in the right direction....Thanks !!!1

  • read some threads...used gparted successfully

  • Hi all,I have my OMV 4 on a raspberry pi 3B+ which is installed on a 32 GB sd card.I need to resize the /dev/mmcblk0p2 partition from 8 GB to 32 GB without loosing data but the resize button is not selectable...

  • 504 Gateway Time-out

    michelefaccini - - General

    Post

    it seems that relative paths are not handled

  • 504 Gateway Time-out

    michelefaccini - - General

    Post

    Hi all, I have my OMV 4 on a raspberry pi 3B+ which I would like to use as a webserver. I thus installed MySQL and Nginx. I put my website on a usb hard disk shared folder. I'm able to land to my index.html page but I get a 504 gateway time-out if I try to access another page on the same directory. Any help would be very appreciated !

  • Redirect to my website

    michelefaccini - - Plugins

    Post

    Oops...it's not an arm container, am I right ?

  • Redirect to my website

    michelefaccini - - Plugins

    Post

    Hi all, I have to redirect the http traffic to my website which is on my usb hard disk (my OMV installation is on a raspberry pi 3B+). I have found in Docker rainist/redirector...is it what I'm looking for ? If yes, once downloaded the image, what are the steps to be done ? Sorry but I'm a newbie with OMV and Docker...so a step by step procedure is required for me

  • upload_max_filesize

    michelefaccini - - Plugins

    Post

    I also edited the nginx.conf file which is under etc/nginx adding to the http block the following : client_max_body_size 20M; but still have 2M for import file Anybody out there who works with a database ? PS: with MyWebSQL the maximum allowed is 25M...I still have to find out where it is set up

  • upload_max_filesize

    michelefaccini - - Plugins

    Post

    I'm surely missing something but be patient... My OMV is listening on port 81, my nginx on port 8181 and phpMyAdmin on port 8182. Is it because phpMyAdmin is listening on a different port that the nginx one ?

  • upload_max_filesize

    michelefaccini - - Plugins

    Post

    Hi all, I edited the php.ini under /etc/php/7.0/fpm to have upload_max_filesize = 20M but when I try to import a file from phpmyadmin,I still have 2M maximum. A little bit confused...What am I missing ? PS: I also restarted php with /etc/init.d/php7.0-fpm restart

  • Docker installation broken

    michelefaccini - - Docker

    Post

    I've just checked now and my system is up to date ! OOps...it wasn't updated !!! : I navigated this morning to the Update Management and there were packages to be installed. Now I am able to activate the plugin.

  • Docker installation broken

    michelefaccini - - Docker

    Post

    Hi all,I've just installed Docker but I can't enable the plugin because docker.sock file is missing from /var/run.I tried to reinstall the plugin without success. What do you suggest ? Source Code (9 lines)

  • Docker installation broken

    michelefaccini - - Docker

    Post

    Hi all, I'm running OMV4 on a raspberry pi 3B+ with MySQL & Nginx installed. Yesterday I installed Docker but when I try to enable the plugin I get an error The file docker.sock is really missing under /var/run. Is there a way to fix this without reinstalling the plugin ? Source Code (9 lines)