Search Results

Search results 1-20 of 1,000. There are more results available, please enhance your search parameters.

  • Quote from lexmark3200: “I understood, but I don't want allow to mount everyone, only two clients. ” Oh. Then you need to make an nfs share with the same shared folder but different client like in the pic below. forum.openmediavault.org/index…1af563be31c026bf020b2c825

  • If you follow the example in the plugin, you would put 192.168.100.0/24 to allow everything in the 192.168.100.x range to mount it.

  • Quote from GeneralMidi: “Do I have to also restore the grub file or just the grubparts? ” If it is a new storage device, grubparts has grub + partitions. So, you would need grubparts. If it was the original install, you may not need to use either.

  • I can't recreate this even with monitoring enabled. What is the output of: dpkg -l | grep openm

  • I don't know why the findfs command that monitoring is using is failing. Try disabling monitoring? Quote from Hani: “the same remote share with remotemount plugin works fine on another OMV4 machine. ” Lots of code has changed between omv 4 and 5. So, this most likely isn't a problem with your remote share.

  • Quote from GeneralMidi: “but the link is dead. ” github.com/OpenMediaVault-Plug…aster/usr/sbin/omv-backup Quote from GeneralMidi: “Must I also write that boot partition separately and if so, with something similar? ” If you have a boot part and you chose the dd method, it will need to be written back in a second command.

  • Why should you use or not use dockers - General - openmediavault

  • dpkg-deb: error:

    ryecoaaron - - General

    Post

    Quote from ofh: “What to do next ?? ” That was meant to give you an idea not me. I don't know how big your drive is but /usr and /lib are large. Guessing /lib is filled with kernel headers. As mentioned in the other threads, you keep changing the command I gave you to drill down on the subdirectory that is the largest. So, du -d1 -x -h /lib would the next check.

  • Edit .inputrc

    ryecoaaron - - General

    Post

    Quote from marc_al: “In fact I only do tty for administrative tasks and to avoid doing sudo everytime i connect as root. but it is correct that I should use sudo (or su) more often. ” You can su or sudo su to root and use your profile settings...

  • Quote from Quiksmage: “I am using 4.1.27-1 according to the system information page. My system shouldn't be too slow. ” If you have a large amount of filesystems, it can take a long time too. Quote from Quiksmage: “On another note, should I be upgrading to 5.x? ” Depends. If your Linux skills are solid, I think it is a good upgrade but I would install fresh over upgrading. There is no OMV provided upgrade path. So, you will have to manually upgrade OMV stuff.

  • Edit .inputrc

    ryecoaaron - - General

    Post

    Quote from marc_al: “So there is no way to tell omv to use another default file? (the point 8 only says not to do it)? ” Nope. I would've suggested a way if it was possible. The only way it can be done is changing OMV code - github.com/openmediavault/open…/shell/20root_inputrc.sls which will be overwritten with each update. Why again are you setting defaults for root? To tell you the truth, I don't know why OMV is managing them either.

  • Error Mounting USB drive.

    ryecoaaron - - General

    Post

    Quote from tannaroo: “I have used gparted live bootable to create 2 partitions on my HDD - one is 20gb (/dev/sda1) for the OS and the second is the rest of space (/dev/sda2) - all formatted to ready to go. I then reinstalled OMV but when I get to screen where it wants the install OMV OS - it only finds SCS1 (sda) which is the combination of /sda1 and /sda2 so it looks as though it going to install and reformat the OS back onto the full drive? ” Yes, the OMV installer will always re-partition you…

  • Best Image for Raspberry Pi 4

    ryecoaaron - - General

    Post

    Quote from Adoby: “I use the "official" RPi4 image for OMV 4 ” It definitely isn't official and won't be around long. I am quite certain the RPi Foundation image is more stable than the frankenstein armbian image.

  • Edit .inputrc

    ryecoaaron - - General

    Post

    I assume you are trying to edit root's inputrc? OMV does maintain that but you should be editing a user's initrc and using sudo. As with editing any config file owned by OMV, it will be overwritten - see problem #8 - forum.openmediavault.org/index…tions-to-common-problems/

  • Something with the monitoring causes this. Does rebooting help?

  • Quote from franc0nelis: “Slight issue with portainer write/data/portainer.db read only file system. not sure if it permissions relating to omv or portainer? ” That is an issue with the storage on your system. It can't write to /srv/dev-disk-by-label-GDATA/appdata/docker2. I would delete the files in that folder and start your portainer config again.

  • If you are using OMV 5.x, it does take considerably longer to apply changes especially on slower systems. Refreshing the page doesn't mean the config change is done.

  • Best Image for Raspberry Pi 4

    ryecoaaron - - General

    Post

    Quote from thunderclap: “This also seems to require OMV 5 beta be installed. ” True but this is what I recommend for RPi4 users. It has been very stable for me. Quote from thunderclap: “I'm wondering if it's possible to install OMV 4 on a Pi 4 but use Ubuntu's server image instead? ” No. OMV 4.x only works on Debian Stretch. OMV 5.x only works on Debian Buster. Quote from thunderclap: “Would this help in making the system more compatible with OMV 4? ” No.

  • Quote from Nacho: “I'm trying to login via Terminal SSH but seems I lost credentials, I'm trying with 'root' and 'openmediavault' pair which apparently are proper one but I get "Permission denied".. ” The root password isn't set on the Raspbian image. So, it definitely isn't openmediavault. The pi user should have a default password of 1234 and that user has sudo privileges.

  • I am very close to deleting the OMV 4.x RPi image - might happen soon. I highly recommend NOT using that image for RPi4s. Use OMV 5.x - forum.openmediavault.org/index…-Armbian-Supported-SBC-s/