Search Results

Search results 1-20 of 1,000. There are more results available, please enhance your search parameters.

  • plex hdhomerun not recording

    geaves - - Docker

    Post

    Check this video

  • Quote from bbddpp: “I also have 2 hardwired Ethernet interfaces ” you nave 2 nics and connected them both? why? do you intend on bonding these or are you going to be using one as a bridge. Quote from bbddpp: “also seeing a docker0 interface, which does have some 172.17.0.1 (not my domain) IPs getting assigned to it when ” That's fine it's dockers networking. Quote from bbddpp: “Something has happened that has caused OMV/debian to no longer want to dole out an IP address to this machine despite i…

  • Frustrating!!

    geaves - - Off-Topic

    Post

    Why is when you edit a post, usually because I have remembered something that could be relevant it fails and gets put in the 'requires moderator approval' I am aware of the spam issue and can understand why it's in place, but editing one's own post makes no sense.

  • Lost all drives

    geaves - - RAID

    Post

    Quote from crashtest: “Calling @geaves ! ” You rang M'lud forum.openmediavault.org/index…7def0dd56ebd3ff8c3a31108e Quote from LarryM04: “Do I have any hope of getting it back without losing all the files on it? ” Depends on which two drives 'disappeared' raid 10 is two mirrored arrays striped. However, you can lose a drive from each mirror and it's recoverable, lose two drives from one of the mirrors and the whole lot is toast. What's the output of mdadm --detail /dev/md0 and cat /etc/fstab EDIT…

  • Wrong omvextras version uploaded

    geaves - - Plugins

    Post

    Quote from Kawatreiber7: “How do I get it away? ” Here

  • Quote from markus-fried@gmx.de: “since the drive has been in operation for quite a few years and if I remember correctly was used for a test install before, the partitions might me remnants of this. ” Then I would start by deleting them, the 3 raid mirrors, then wipe the drive.

  • Quote from markus-fried@gmx.de: “Can you shed some light on what these partitions really are and whether the "degraded" warning is something to worry about? ” It means it's not clean i.e. working correctly, in fact the whole output except for /dev/md127 which is a raid 5 makes no sense. Suggestion, backup your data, disconnect the drives, reinstall, connect the drives, wipe them and start again. Can it be resolved without doing the above, I doubt it, but to give you an idea, OMV does not use par…

  • What are people who use OMV called?

    geaves - - Off-Topic

    Post

    Gonna reverse that -> Virtually Minded Organism

  • 2nd IP for tvheadend and avm DVB-C

    geaves - - Network

    Post

    Quote from draddy: “how can i realise it in omv5? or can i set a 2nd ip in the docker on any way? ” AFAIK you should be able to set up and use a MacVlan in Portainer specifically for this purpose.

  • Couldn't find mirror for Raspberry Pi

    geaves - - General

    Post

    Quote from WARRIORS: “Hello everyone, I recently found on the official website that the official website could not find a mirror of the Raspberry Pi. What is going on? ” if you are referring to an image for the Pi there isn't one, however there is a guide here which explains how to install on a Pi.

  • Defekte Platte im RAID5 tauschen

    geaves - - RAID

    Post

    Quote from Gst: “I`m sorry for that mass of work which I brought to you. Thanks for your time and help. ” That's OK, at least I finally found the issue it's a pity it wasn't a simple do this do that and it's all singing and dancing again.

  • Defekte Platte im RAID5 tauschen

    geaves - - RAID

    Post

    Quote from Gst: “So would it be better/ easier to create a new system? ” Yes, I can't and no one else could resolve this, I'm actually amazed the system has been working at least the raid side of it. If you are running OMV3 then do a clean install of OMV4, you could try OMV5 but this would be a greater learning curve but in my opinion worth the effort. Take screenshots of your shares and any settings, backup your data, do a clean install (no data drives connected) make sure it's fully up to date…

  • Defekte Platte im RAID5 tauschen

    geaves - - RAID

    Post

    Ok are you sitting comfortably In English: It's f*cked In German (according to deepl.com) Es ist beschissen. Why; This is from wipefs output; LABEL: homeSAVE UUID: 2f22f941-e6a7-424e-8ce2-da43bc4a56e3 This is from mdadm detail; Name : openmediavault:raid5home UUID : 69bd812a:cd81f419:8a590c2f:87234e77 This from fstab; /dev/disk/by-label/homeSAVE /srv/dev-disk-by-label-homeSAVE ext4 This is from blkid from your first post; / dev / md127: LABEL =" homeSAV9e22U-8U-8E-2 "U2 da43bc4a56e3 "TYPE =" ext…

  • Defekte Platte im RAID5 tauschen

    geaves - - RAID

    Post

    Quote from Gst: “No, it is not diplayed as you can see on the 2. picture in post 47 ” To be honest, I don't know, this has been done so many times here from the GUI and from the command line and it simply works this is first time I have come across a raid that will not stop. Ok because I have 4 monitors, I've been going back over some of the outputs and something has just hit me, (I think 'the penny has just dropped') Post the output of wipefs -n /dev/md127 and mdadm --detail /dev/md127 and cat …

  • Defekte Platte im RAID5 tauschen

    geaves - - RAID

    Post

    Quote from Gst: “I mounted the disk was this correct? ” No, there is no need to mount the disk, selecting the raid then recover on the raid menu should display that disk to be added to the array. What's the output of wipefs -n /dev/sdd and the same for wipefs -n /dev/md127

  • Again : bad disk, changed, no raid anymore

    geaves - - RAID

    Post

    Quote from hubertes: “Yep, ” if you had removed the drive from the array, then removed it from the machine, then installed the new drive, prepped it then added it to the array it would have been fine. I'm assuming you need to add /dev/sda, the blkid output finds [bdefg] as raid members

  • Defekte Platte im RAID5 tauschen

    geaves - - RAID

    Post

    Quote from Gst: “there is needed a cook now ” you as well

  • Defekte Platte im RAID5 tauschen

    geaves - - RAID

    Post

    Quote from Gst: “I just have made a Backup. ” Well there are 2 options, because at present I can't find why the raid will not stop; 1. From Storage -> Disks wipe /dev/sdd, then File Systems and format that drive the same as the raid which is ext4, then try the recovery option again. 2. Remove all SMB shares, then remove all shared folders, remove one of the drives from the array, then the array can be deleted, wipe the drives recreate the array and your shared folders then your smb shares. Then …

  • Defekte Platte im RAID5 tauschen

    geaves - - RAID

    Post

    Quote from Gst: “no.. ” Worth a try, which is odd considering the drive shows up in blkid. Can you backup what's on that raid, or do you have a backup?

  • Defekte Platte im RAID5 tauschen

    geaves - - RAID

    Post

    Well that's a start, and it tells us that a drive has been removed, which must be /dev/sdd So back to the GUI, leave Putty alone, Raid Management click recover on the menu bar, does a dialog come up? and does it display /dev/sdd?