Search Results

Search results 1-19 of 19.

  • Mail server - what do I need?

    KVL - - General

    Post

    Hello, I would like to create a mail server on my OMV 4.1.32 and have pointed my MX record to the box.. What I would like to achieve, is a simple server, which provides me with an single interface - console or web - where I can pull the email from what mail address I have allowed for the domain / MX. Nothing fancy - just a single box for my ad-hoc addresses.. Can anyone guide me to such a simple setup - should I installed it on the core OMV, or should I extended it have it running via Virtual Bo…

  • Configure CPUs / cores

    KVL - - General

    Post

    Thanks Adoby, I am sure you are right - I will not be better than the defaults, so will leave it to this. Thanks for your input and to have me realize..

  • Configure CPUs / cores

    KVL - - General

    Post

    Hello, I have a ThinkStation, which runs OMV 4. The machine has 16 cores.. Does OMV automatically handle these cpus/cores optimal, or can tweak it somehow. Eg, tell virtual box to use 8, web service 2, Plex 4 etc, or is that transparent done in the most optimal way by the OS Regards K

  • Port Knocking - possible?

    KVL - - Network

    Post

    I got it working as I wanted. Here you are, if anyone else wanna do similar. iptables -F iptables -X iptables -Z iptables -N STATE0 iptables -A STATE0 -j LOG --log-prefix '*** ' -m limit --limit 5/m iptables -A STATE0 -p udp --dport 1010 -m recent --name KNOCK1 --set -j DROP iptables -A STATE0 -j DROP iptables -N STATE1 iptables -A STATE1 -m recent --name KNOCK1 --remove iptables -A STATE1 -j LOG --log-prefix '*** KNOCK 1 ' -m limit --limit 5/m iptables -A STATE1 -p udp --dport 2020 -m recent --…

  • Thanks, I ended up mounting the old drives as external and copied the data over.

  • Port Knocking - possible?

    KVL - - Network

    Post

    Hi, I am wondering if it is possible to configure Port Knocking in the firewall which comes with OMV (it is Iptables, right)? If possible, can anyone point me to a guide or hints on how to configure it? Best regards K

  • Hi there, I have to replace one of my disks on the machine. The disk is not running the /, but just a simple EXT4 hd mounted. What is the best way for me to move data to the new disk, and dont affect any of the OMV configurations, e.g SMB, poiting to the disk. CloneZilla?' DD? and then just clone from internatal disk to new extertal, and then swap the disks when clone is done (maybe need to update fstab or grub)? Or what else is preferred? Many thanks and regards, K

  • Configure MySQL and available cores

    KVL - - Plugins

    Post

    Hello, I have a OMV running on a machine with 64 gb memory and 24 cores. MySQL is installed via the plugin. Can I control how many cores I make available for the MySQL, or is this purely managed by the Linux / OMV? Regards, K

  • Good evening, I have an odd issue with a new installed OMV. Latest release - 4.1.22. I use a CD as installation media, and install OMV on a USB. Working fine, and the machine is booting perfectly up, and / is mounted on /dev/sda1. Afterwards a SATA disk is added to the primary SATA controller, and machine is booted, but fails, as the SATA disk has been configured as /dev/sda. / on the initial SDA1 is no longer found. Why does this happen - I doesnt happen on my other OMV installation configured …

  • Sure, I have several times tried to installed the Docker plugin, both via the web gui and console. Fails in all cases. So Docker is unfortunately not an alternative.

  • Thanks, I know. But it fails to install. As several users have reported.

  • Hi, I have looked a bit more into why I cant install Plex on OMV v. 4.1.8.2-1 (Arrakis).. Plex has been downloaded with wget directly from Plex.. wget downloads.plex.tv/plex-media-s….5271-200287a06_amd64.deb Installation is started with "sudo dpkg -i ./plexmediaserver_1.13.4.5271-200287a06_amd64.deb" but fails with the error: Created symlink /etc/systemd/system/multi-user.target.wants/plexmediaserver.service → /lib/systemd/system/plexmediaserver.service. Job for plexmediaserver.service failed be…

  • I got the same error, also cant install the Plex.

  • OK, I think i got it now. I tried to create a new file systems with xfs, ext3, ext4 but with no success. Tried wipe the drives ahead and recreate them, but with no success. But when removing the partition and create a new Linux partition via fdisk, and there after create a new file system it work. So fdisk did the trick for my, and I have by disks back - just have to restore the data now.

  • I got the same as Lambik, I cant create a new file system. I can select Create and the fill out Device, Label and File system. It completes without errors, but file system is not showing up. Thou the file system for the USB key from the OMV runs is listed.. omv-update has been updated, version 4.1.6 By the way, this on a fresh OMV installation - not an upgrade from v3.

  • I got the same issue. The file systems are listed, but status is set to Missing. I can manually mount the 4 external drives. I cant delete the Devices from the list - there are all greyed out. I can Create new devices, but that will surely require a full wipe of my data..

  • FTP fails on 3.0.89

    KVL - - FTP

    Post

    Hello there, I am the happy user of the OMV, currently running version 3.0.89. HTTP, FTP, VirtualBox, Subsonic, Plex and SSL are running, and have been working without issue. Box was last restarted a month ago. No firewall rules specified on OMV. But this morning I had to connect via FTP and it failed, which hasnt been an issue before. FTP is set to run in passive mode and with a masqurade address specified. SSL/TLS with LetsEncrypt is enabled, as well "Clients to use FTP over TLS". Required por…

  • I think I just found an old thread describing the thing. What is the difference between Privileges and ACL?

  • Hi, I am a new user to the OMV, and am excited about the software. So much that I sold my QNAP TS251 straight ahead. I like that it is a Linux machine which I can dig into, and not just some nice closed box. So far I have only found very little bugs (newest 3.x release), will I will try to report at some other time. I can feel the configuration of services and access is rather different than used to, but its OK. I will learn But there is some basic in the security which I am missing - maybe some…