Search Results

Search results 1-20 of 142.

  • OMV 5 new behavior

    Spy Alelo - - Network

    Post

    I see. I wonder if this is the new expected behavior or if is just a new default for it, kinda sucks since I didn't expect it.

  • OMV 5 new behavior

    Spy Alelo - - Network

    Post

    Cool, I'll do the same and replicate.

  • OMV 5 new behavior

    Spy Alelo - - Network

    Post

    I know right? Is so bizarre, I don't even know where to start on trying to figure this out. As you said, I don't see where it would generate this or even why. I did see an impact that this would have for me, and that's when using WOL. The app I use wouldn't be able to determine if the server is up since it has use the the physical MAC to power it up. I got scripts on another server that checks those things and powers it up to RSYNC files from one to the other, this will be a challenge.

  • OMV 5 new behavior

    Spy Alelo - - Network

    Post

    @ryecoaaron maybe you'll have an idea on this

  • OMV 5 new behavior

    Spy Alelo - - Network

    Post

    Hi all! I'm doing an early test of OMV 5.2.3-2 through an upgrade from version 4. I've been able to see a few issues along the upgrade and was able to fix them all, but something caught my attention. When creating my bond (I use 802.3ad LACP) I noticed that the MAC address gets auto-generated, instead of deriving it from the 1st NIC. Here's a snapshot I grabbed from iLO: forum.openmediavault.org/index…f08f16b97a798cbd9cc43c62f The newly generated MAC is highlighted. I don't actually see any ill …

  • The HPE resource thread

    Spy Alelo - - My NAS Build

    Post

    Hello everyone! iLO4 2.70 has been released. Among the bug fixes, this new version has HTML5 support for the KVM console and works with any modern browser. Java or .NET are no longer required. To update iLO from its own interface, simply open the cp038075.exe with the 7-zip utility and extract the ilo_270.bin file. Then go to "Administration" and "Firmware". You can now upload the .bin file from there, is self-explanatory at this point. Updating your iLO will not cause any downtime on your serve…

  • The HPE resource thread

    Spy Alelo - - My NAS Build

    Post

    So here's how you can make the SSD on the Microserver Gen8 OOD port bootable: 1. First, make sure that the Dynamic Smart Array option is turned on. You can enable it in the BIOS/RBSU settings (F9) 2. Start up the server, then press F10 during POST. 3. After POST, you should get three options to boot. Select "Smart Storage Administrator" (or SSA for short) 4. Select the storage controller, should be labeled as "Dynamic Smart Array B120i RAID" 5. Click "Configure" 6. Click "Create Arrays with RAID…

  • The HPE resource thread

    Spy Alelo - - My NAS Build

    Post

    It's been a long time since I've posted anything new, so I'd like to share some tidbits with you guys. This thread will be a HPE resource thread. That means links to utilities, repos, drivers, and how-to guides with some of the hardware. I'd rather not do any troubleshooting here, so please open a new thread for that. Let me begin with some handy links: Management Component Pack Repo This repo is a must-have for OMV users. You can install utilities such as AMS that will report to iLO stats from …

  • HP microserver Gen10

    Spy Alelo - - My NAS Build

    Post

    Just like Batman and his batsignal lol. That Marvell chipset has been supported on Debian since 2013, but the RAID management is for Windows only. I'll be honest though, we don't have any of those servers in the lab since they are pretty much standard and off-the-shelf components, so we have little to do with the engineering of them and I don't know much about this particular model.

  • HPE Proliant Servers

    Spy Alelo - - My NAS Build

    Post

    Quote from Krisbee: “Many thanks for answer my questions. But now I'm really confused - Celeron G1610T is in the Intel ARK as supporting ECC memory -are you saying it doesn't? What is the position with the officially supported i3-3240 variant? HPE sell this variant of the gen8 microserver with ECC RAM. So have they tweaked the BIOS to support/recognise the i3-3240 and work with ECC RAM in a system that is not actually activating ECC function? ” Yeah there are some exceptions from Intel where som…

  • HPE Proliant Servers

    Spy Alelo - - My NAS Build

    Post

    Quote from Krisbee: “Better late than never. I finally succumbed to the UK cashback offer and bought a HP Microserver Gen8 1610T 4GB at a price which is about the same as a low end 2-bay Synology DS216J. OK, the running cost will be higher but the fiddle factor is magnitudes better on the microserver. I have some questions which Spy Alelo, or others, might clear up for me. 1. If OMV is installed, what power management is best. Should I use "OS Control Mode" or HP's "Dynamic Power Saving"? 2. Thi…

  • HPE Proliant Servers

    Spy Alelo - - My NAS Build

    Post

    Man this got a lot of threads as of late. I'll answer a few things for everyone: The dreaded "BIOS BUG" with Linux and HPE servers. This has absolutely zero impact on our systems and the message is purely informational, not an indication of a problem. The reason is simple; our iLO computer keeps track of the system's counters while it also handles power & cooling. We do not hand these off to the OS and I do NOT recommend changing anything in the BIOS to get around this. Just let iLO do its job. …

  • HPE Proliant Servers

    Spy Alelo - - My NAS Build

    Post

    I think the SD card is fine since Grub actually booted the system. I am no expert on Grub, but it looks like it can't load the kernel (?).

  • HPE Proliant Servers

    Spy Alelo - - My NAS Build

    Post

    Quote from ionut007: “Hello to all, I have a HP Gen 8 G1610T with the latest firmware (console on iPhone, pretty cool :)) and I have 2 Seagate (brand new) 4TB HDD and another one 1 TB HDD. forum.openmediavault.org/index…f08f16b97a798cbd9cc43c62fforum.openmediavault.org/index…f08f16b97a798cbd9cc43c62f The 2 Seagate are mounted in firsts an second bay of the server. I disabled the built-in HP B120i RAID controller and I have activated AHCI. OMV version 3.x (Erasmus) is installed on SD-Card and I i…

  • HPE Proliant Servers

    Spy Alelo - - My NAS Build

    Post

    I've seen them between the range of $80-$180 to be honest. Quite an old generation that not many are interested in.

  • What do you mean by prefer? If you named both services the same, that can be a bit troublesome when browsing the network shares. Make sure you are using a different name for the AFP service, for example: 'MyNAS' for CIFS and 'MyNAS-AFP'. You can call them whatever you want as long as they are different, so you can see both services individually listed.

  • You guys went overkill on all of this. Loved every post on this thread, and I learned something new too!

  • There's nothing other than default for all my shares. Make a new share as public and allow guest to write/read, make sure you can write to it and if you can, try indexing that.

  • Just did the steps I gave you, and I am able to index my shares just fine. The indexing started right away and a progress bar now shows up in Spotlight. Did you try to use sudo before enabling it? The first line was enough to get mine rolling. Pasting the command here for future reference: Source Code (1 line)It just seems bizarre that is only indexing sparse volumes and not the share directly.

  • AFP transfer sometimes very(!) slow

    Spy Alelo - - AFP

    Post

    The file system is not important, I use EXT4 myself. You only want HFS+ for direct attached drives. The fact that you can make a sparse bundle and write/index it, tells me that you do have the right permissions on the share. Thanks for letting me know how you set yours up, I'll try to replicate and keep you posted.