Search Results

Search results 1-20 of 1,000. There are more results available, please enhance your search parameters.

  • Configuration/combination question

    gderf - - General

    Post

    OMV no longer supports RAID using USB drives. The Flash Memory plugin works with OMV4.

  • HHD expansion PCIe card

    gderf - - My NAS Build

    Post

    Quote from JoeyWoz: “Quote from gderf: “Quote from JoeyWoz: “Interesting proposition. I had always assumed HBA's were only compatible with SAS drives It will be a while before I'll need external drive chassis, but the option is there. I bought a case to accomodate 10 drives in the build I just did last month. gderf, do you build your own drive chassis/enclosures, or do you buy pre-built? Any recommendations? ” HBAs are SAS and backward compatible with SATA drives.As to what I built, it's all in …

  • What is the stable version on 02/2020

    gderf - - General

    Post

    If this is your first foray into OMV, I suggest using v 5.

  • HHD expansion PCIe card

    gderf - - My NAS Build

    Post

    Quote from JoeyWoz: “Interesting proposition. I had always assumed HBA's were only compatible with SAS drives It will be a while before I'll need external drive chassis, but the option is there. I bought a case to accomodate 10 drives in the build I just did last month. gderf, do you build your own drive chassis/enclosures, or do you buy pre-built? Any recommendations? ” HBAs that are SAS are backward compatible with SATA drives. As to what I built, it's all in my sig.

  • There are numerous add-in cards available to add SATA ports. Look around on Amazon, ebay, newegg and maybe others for choices.

  • Some motherboards have a shared SATA/M.2. Check with your MB vendor for the specs.

  • OK, here is the tested working here solution (one additional step added): As the root user, edit the file: /etc/default/openmediavault and add the following line (or change it to the value you want if it already exists): OMV_MONIT_SERVICE_FILESYSTEM_SPACEUSAGE=95 For OMV 5.x, as root run: omv-salt stage run prepare omv-salt deploy run monit

  • Try this. As the root user, edit the file: /etc/default/openmediavault and add the following line (or change it to the value you want if it already exists): OMV_MONIT_SERVICE_FILESYSTEM_SPACEUSAGE=95 For OMV 5.x, as root run: omv-salt deploy run monit

  • HHD expansion PCIe card

    gderf - - My NAS Build

    Post

    There are several variations within the 9200 line. I don't know what the differences are other than if you don't need or don't want a RAID card, then don't pay extra for it. I got mine on Amazon for $59.00. The 9300 series are newer and use PCIe 3.0 instead of 2.0 used by the 9200 series. But this probably won't matter to you. P20 is the latest firmware available for the 9200 series cards. You don't necessarily need it, mine came with much older firmware (v7.0) and it worked fine. I flashed it t…

  • HHD expansion PCIe card

    gderf - - My NAS Build

    Post

    My LSI 9200-8E HBA card was recognized by OMV, as were all the drives plugged into it.

  • HHD expansion PCIe card

    gderf - - My NAS Build

    Post

    Given the choice between buying a PCIe SATA card or a PCIe Host Bus Adapter, chose the HBA. It offers a future path the SATA card doesn't and can't. I have an LSI 9200-8E HBA in my OMV machine that connects to a DAS box. The card has external connectors (the E in the model number indicates this.) If your drives are in the same box as the HBA card, you need one with internal connectors. LSI products use an "I" in the model number to show this. Tons of cards can be had on ebay or Amazon at very go…

  • You might have a failing drive it it makes clicking noises. Your drives should be mounting via UUID or Disk Label, but not by /dev/sdx. If you are using USB drives, you are likely going to have problems.

  • Don't worry about what you saw, I see similar all the time. From today's run here: Untagged: linuxserver/jackett@sha256:bc673819ddade6716b7f46241d27ba69895d94eee5d8ecae1d61adb188a363e5Deleted: sha256:0b7c5d34ea96b577f271d33c10b2812f5dbeddba19ffc65cb62805d69983c8a5Deleted: sha256:08014f12fb51399a9fb221e336a0e74e9f91e80dd56a8f6e974b32c604bb9802Deleted: sha256:71cd0bbea496c9416c10f7d5d8b1d20e7366664a98e22b60bf3f169627441537

  • You can still use a scheduled job to do this. I run this daily at midnight: Source Code (1 line) Try it in the shell first to see that it works.

  • Transcode Folder SSD

    gderf - - General

    Post

    It doesn't matter where the PMS Transcode folder is. There is no advantage to having it on an SSD either. And by default OMV will not offer the system drive as a user data storage location. You're better off just putting it in the same place as the PMS metadata directory is which is the default. But if you insist on doing this, just create the folder in the shell and adjust its ownership and permissions such that PMS can use it. You'll have to create an appropriate Bind mount in the docker setup…

  • Folder & file display problem

    gderf - - General

    Post

    See the OMV Changelog: openmediavault (5.3.3-1) github.com/openmediavault/open…diavault/debian/changelog

  • Mergerfs guide

    gderf - - General

    Post

    You could read the documentation for starters. github.com/trapexit/mergerfs

  • My bad I misread your post.

  • Plex - Unable to connect to Media securely

    gderf - - Plugins

    Post

    No idea what client app you are using mine does not look like that.

  • As an aside, most VPN providers offer a SOCKS5 proxy with their service. I run deluge using a SOCKS5 proxy rather than VPN. You can set it up in deluge Preferences | Proxy.