Can't sign in to plex account since last plex plugin upgrade

Hi,

Since the last upgrade of the plex plugin, I'm not able to sign in from my server to the plex account.

Any ideas?

--> Snapshot here:

Any idea?

I have tried to uninstall the plugin and reinstall it but the result is the same...

@tekkb ?

Thanks for the clue by I have even tried to create a new account and same issue....
The only thing that I did yesterday is change my lan network, but everything is working fine except this....I don't thinck it's related...

By the Way...I can sign in on the plex website but not with my server....

I don't know what to do....

Zitat von tekkb

Where did you get this upgrade from???? This is weird issue. Never seen it.

It was an upgrade on omv plugin section...
I'm suspecting than plex isn't able to get internet access....
How can we check it?
What can I do to solve this shiiit?

Zitat von tekkb

That could be... Are you using the firewall for OMV? Did you port forward 32400 from your router to your OMV in your router settings???

No using de omv fw.

The port forward is for remotely access not to only signing in from your server to plex...
Btw...I have never did it because I use upnp and I haven't changed my router...

But I insist...the problem is to sign in on the server itself...

root@microserver:~# cd /opt
root@microserver:/opt# wget http://shell.ninthgate.se/pack…-8403350-debian_amd64.deb
--2015-09-05 20:24:47-- http://shell.ninthgate.se/pack…-8403350-debian_amd64.deb
Resolving shell.ninthgate.se (shell.ninthgate.se)...

failed: Name or service not known.
wget: unable to resolve host address `shell.ninthgate.se'

Ok, that's the problem, I suspected it!!!
root@microserver:/opt# cat /etc/resolv.conf
search lupilan
nameserver 192.168.1.254
root@microserver:/opt#

My network is now 192.168.10.0/24...

I changed it on OMV, I don't know why it didn't take the change...

EDIT: on OMV is OK...I don't know why it is not OK on my system.... maybe the cache?

Zitat von tekkb

You can set the dns servers when you edit your nic in the web gui. Just give me a minute.. I give instructions.

I know but in the webgui was OK...

I have edited the /etc/resolv.conf and now plex can login in...

Zitat von tekkb

No Mr.
Follow my instructions above. What you did will be overwritten. You must do it in the Web GUI.

Ok, done...

but it hasn't overwriten the file....
see attached.

root@microserver:/opt# cat /etc/resolv.conf
search lupilan
nameserver 192.168.10.254
root@microserver:/opt#

Zitat von tekkb

It will be the same but on reboot it could be overwritten.

Look at:
/etc/network/interfaces

It should show the proper dns server and search dns server.

You should be good now.

Alles anzeigen

It's OK now...
# eth0 network interface
auto eth0
allow-hotplug eth0
iface eth0 inet static
address 192.168.10.110
gateway 192.168.10.254
netmask 255.255.255.0
dns-nameservers 192.168.10.254
dns-search 8.8.8.8
pre-down ethtool -s $IFACE wol g
iface eth0 inet6 manual
pre-down ip -6 addr flush dev $IFACE

But I didn't changed the dns-name server here which was already OK.
I lacked the dns-search 8.8.8.8.
Could have it been that?