Can't start my NAS with MagicPacket or WOL from Fritzbox

  • I hope you can help me, I have read here many threads about autoshutdown and WOL but I didn't found the solution.


    My NAS doesn't respond to MagicPaket from my PC or WOL from my fritzbox.
    I have this issue after I had installed update pakets from OMV 1.19. So I have think I can solve this issue if I update my OMV to 2.1.17.


    but it was doesn't so. There no action from my NAS when my PC send an magicpaket


    Here My autoshutdown log


    The NAS response to WOL over Keyboard.


    The Backport kernel is upgraded to 3.16


    Interface information

  • I send the packet normely by the tool "MagicPacket" Version 1.5.0.0 from my PC or Laptop im my LAN
    in this tool I bind the MAC adress from my NAS
    Usually I don't use the WOL function from my fritzbox.And yes it is the button inside the webIF.
    This I have do only for testing, because my NAS don't response to the MAgicPacket tool since the update.
    Here are my network config.


    In my Bios is wol enable.

  • Hi subzero command tcpdump is unknow.
    root@DoggiNAS:~# tcpdump -nni etho 'port 9'
    -bash: tcpdump: Kommando nicht gefunden.


    how can I install it on omv?


    @WastlJ Backport kernel 3.16.0-0.bpo.4-amd64 is installed


  • here the output

  • omg ;(
    1. I have type pm-suspend
    2. after 2min I send the magic packet but nothing happens. X(
    3. I went in my Bios from the NAS.
    - the ACPI Config are ok
    -on by PCIE-Device
    -on by USB-Keybord
    then I check my Start-Device
    it was first NAS-Storage , secondly Network <- this I have change to first Network and then storage.
    4. then restart NAS
    5. type pm-suspend
    6. send the magic packet
    and "tataa" my NAS wake up. 8o:thumbup:
    Thanks for your help guys

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!