NUT settings for UPS Trust OXXTRON 1300VA

  • Hallo.


    I'm running OMV 2.1.20 Kernel 3.16.0-0.bpo.4-586
    Today i got my UPS UPS Trust OXXTRON 1300VA.
    I installed the NUT plugin.
    I tried several driver configurations like the Trust driver form the NUT Hardware compatibility list.


    I tried

    Code
    driver = blazer_ser
    port = auto


    and

    Code
    driver = blazer_usb
    port = auto


    i also tried the port usb and several other drivers but nothing. when i go to the system->ups tab i receive the error

    Code
    Failed to execute command 'upsc 'ups' 2>&1': Error: Driver not connected
    Errore #4000:
    exception 'OMVException' with message 'Failed to execute command 'upsc 'ups' 2>&1': Error: Driver not connected' in /usr/share/openmediavault/engined/rpc/nut.inc:151
    Stack trace:
    #0 [internal function]: OMVRpcServiceNetworkUPSTools->getStats(NULL, Array)
    #1 /usr/share/php/openmediavault/rpcservice.inc(125): call_user_func_array(Array, Array)
    #2 /usr/share/php/openmediavault/rpc.inc(79): OMVRpcServiceAbstract->callMethod('getStats', NULL, Array)
    #3 /usr/sbin/omv-engined(500): OMVRpc::exec('Nut', 'getStats', NULL, Array, 1)
    #4 {main}


    my lsusb

    Code
    Bus 002 Device 005: ID 0925:1234 Lakeview Research 
    Bus 004 Device 002: ID 0781:5567 SanDisk Corp. Cruzer Blade
    Bus 004 Device 004: ID 0424:2228 Standard Microsystems Corp. 9-in-2 Card Reader
    Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


    My bc is up to date


    i tried also some command found in other threads similar like

    Code
    sudo /lib/nut/blazer_usb -a usb -x vendorid=0925
    Network UPS Tools - Megatec/Q1 protocol USB driver 0.08 (2.6.4)
    Error: Section usb not found in ups.conf


    Can somebody give me some hints to solve this please


    Thanks

  • Maybe this can help more

    Code
    [code]

    [/code]

  • i got uone step further.


    i changed my configuration to

    Code
    driver = usbhid-ups
    port = auto
    vendorid = 0925
    productid = 1234


    now when i hit


    i get the above output but it says they don't match, althought the vendor and product id appear in the checked devices.


    i tried other drivers like

    Code
    bcmxcp_usb
    blazer_usb
    richcomm_usb
    ecc


    but i get this

    Code
    Network UPS Tools - Generic HID driver 0.37 (2.6.4)
    USB communication driver 0.32
    Error: UPS [trust] is for driver richcomm_usb, but I'm usbhid-ups!


    So any idea? i looked also in the manpages of usbhid-ups but its not my knowledge.


    Thanks for replies

  • Ok i solved by my own with the kind help of the NUT mailing list members.


    My configuration for UPS Trust OXXTRON 1300VA is:

    Code
    driver = richcomm_usb
    port = auto


    It seems that the only information given from the UPS the following


    The status:

    Code
    OL / OB / BL

    are shown correct i think when the supply status changes.
    When the ups is attached on the AC it shows

    Code
    OL (online i think)


    When i take away the power from the ups it shows

    Code
    OB (on battery i think)


    When the battery is low it show

    Code
    BL (battery low i think)


    it respects also the given shutdown or suspend settings of the plugin.


    If somebody figures out how to squeeze more information out of it i would be interested 8o

  • Hallo All.


    I update my system to version 4 and now i'm trying to configure it again but i have a problem giving the ups a name.


    i always get the error on saving the configuration



    Any ideas to help?


    Thanks in adavnce

  • The regex requires only lower case which may be one of the reasons that its refusing "UPSTESTNAME".


    I'm also having the same problems right now too and have tried a number of usernames and they all throw the same error.


    If anyone can shed some light I'd be greatly appreciative.


    CNS.

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!