Syncthing on OMV 3.0.26

  • 3.5 is in the repo now. Works on my fresh 3.0.26 VM.

    Great work Aaron, do you accept personal donations? (just assuming that's your first name ;)
    You just saved my day. This is my main motivator for using OMV now, the brilliant syncthing plugin. And that it's running on 3.* with a Jessie base is just a treat.

    • Offizieller Beitrag

    Aaron is my first name but I don't work at Ryeco anymore :) I really like the syncthing plugin even though I don't use it really. There is a donation page on omv-extras and that is my account (just noticed the mailing address is wrong though). The money would probably help fund a new odroid xu4 so I can update that image for OMV 3.x.

    omv 7.0.4-2 sandworm | 64 bit | 6.5 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.10 | compose 7.1.2 | k8s 7.0-6 | cputemp 7.0 | mergerfs 7.0.3


    omv-extras.org plugins source code and issue tracker - github


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

  • Just a little FYI, this is with a clean updated OVM 3.* and then the ovm-extras installed according to this and then selecting some extras and clicking Install;

    Reading package lists...
    Building dependency tree...
    Reading state information...
    The following extra packages will be installed:
    etherwake hpacucli libnet1 libpcap0.8 nast syncthing wakeonlan
    The following NEW packages will be installed:
    etherwake hpacucli libnet1 libpcap0.8 nast openmediavault-backup
    openmediavault-hpraid openmediavault-syncthing openmediavault-wol syncthing
    wakeonlan
    0 upgraded, 11 newly installed, 0 to remove and 0 not upgraded.
    Need to get 9451 kB of archives.
    After this operation, 19.2 MB of additional disk space will be used.
    Get:1 http://apt.syncthing.net/ syncthing/release syncthing amd64 0.14.0 [4928 kB]
    Get:2 http://hwraid.le-vert.net/debian/ jessie/main hpacucli amd64 9.20.9.0-1 [4172 kB]
    Get:3 http://ftp.surfnet.nl/os/Linux/distr/debian/ jessie/main libnet1 amd64 1.1.6+dfsg-3 [60.4 kB]
    Get:4 https://dl.bintray.com/openmed…lugin-developers/erasmus/ jessie/main openmediavault-backup all 3.3.1 [22.3 kB]
    Get:5 https://dl.bintray.com/openmed…evelopers/erasmus-hwraid/ jessie/main openmediavault-hpraid all 3.1 [3948 B]
    Get:6 https://dl.bintray.com/openmed…-developers/erasmus-sync/ jessie/main openmediavault-syncthing all 3.5 [22.4 kB]
    Get:7 http://ftp.surfnet.nl/os/Linux/distr/debian/ jessie/main libpcap0.8 amd64 1.6.2-2 [133 kB]
    Get:8 https://dl.bintray.com/openmed…lugin-developers/erasmus/ jessie/main openmediavault-wol all 1.0.4 [15.0 kB]
    Get:9 http://ftp.surfnet.nl/os/Linux/distr/debian/ jessie/main etherwake amd64 1.09-4 [8746 B]
    Get:10 http://ftp.surfnet.nl/os/Linux/distr/debian/ jessie/main nast amd64 0.2.0-6 [73.3 kB]
    Get:11 http://ftp.surfnet.nl/os/Linux/distr/debian/ jessie/main wakeonlan all 0.41-11 [11.5 kB]
    Fetched 9451 kB in 2s (3811 kB/s)
    Selecting previously unselected package libnet1:amd64.
    (Reading database ... (Reading database ... 5%(Reading database ... 10%(Reading database ... 15%(Reading database ... 20%(Reading database ... 25%(Reading database ... 30%(Reading database ... 35%(Reading database ... 40%(Reading database ... 45%(Reading database ... 50%(Reading database ... 55%(Reading database ... 60%(Reading database ... 65%(Reading database ... 70%(Reading database ... 75%(Reading database ... 80%(Reading database ... 85%(Reading database ... 90%(Reading database ... 95%(Reading database ... 100%(Reading database ... 32685 files and directories currently installed.)
    Preparing to unpack .../libnet1_1.1.6+dfsg-3_amd64.deb ...
    Unpacking libnet1:amd64 (1.1.6+dfsg-3) ...
    Selecting previously unselected package libpcap0.8:amd64.
    Preparing to unpack .../libpcap0.8_1.6.2-2_amd64.deb ...
    Unpacking libpcap0.8:amd64 (1.6.2-2) ...
    Selecting previously unselected package etherwake.
    Preparing to unpack .../etherwake_1.09-4_amd64.deb ...
    Unpacking etherwake (1.09-4) ...
    Selecting previously unselected package hpacucli.
    Preparing to unpack .../hpacucli_9.20.9.0-1_amd64.deb ...
    Unpacking hpacucli (9.20.9.0-1) ...
    Selecting previously unselected package nast.
    Preparing to unpack .../nast_0.2.0-6_amd64.deb ...
    Unpacking nast (0.2.0-6) ...
    Selecting previously unselected package openmediavault-backup.
    Preparing to unpack .../openmediavault-backup_3.3.1_all.deb ...
    Unpacking openmediavault-backup (3.3.1) ...
    Selecting previously unselected package openmediavault-hpraid.
    Preparing to unpack .../openmediavault-hpraid_3.1_all.deb ...
    Unpacking openmediavault-hpraid (3.1) ...
    Selecting previously unselected package syncthing.
    Preparing to unpack .../syncthing_0.14.0_amd64.deb ...
    Unpacking syncthing (0.14.0) ...
    Selecting previously unselected package openmediavault-syncthing.
    Preparing to unpack .../openmediavault-syncthing_3.5_all.deb ...
    Unpacking openmediavault-syncthing (3.5) ...
    Selecting previously unselected package wakeonlan.
    Preparing to unpack .../wakeonlan_0.41-11_all.deb ...
    Unpacking wakeonlan (0.41-11) ...



    >>> *************** Error ***************
    Failed to read from socket: Connection reset by peer
    <<< *************************************



    >>> *************** Error ***************
    Failed to connect to socket: Connection refused
    <<< *************************************



    >>> *************** Error ***************
    Failed to connect to socket: Connection refused
    <<< *************************************



    >>> *************** Error ***************
    Failed to connect to socket: Connection refused
    <<< *************************************



    >>> *************** Error ***************
    Failed to connect to socket: Connection refused
    <<< *************************************



    >>> *************** Error ***************
    Failed to connect to socket: Connection refused
    <<< *************************************



    >>> *************** Error ***************
    Failed to connect to socket: Connection refused
    <<< *************************************


    Looks like it's related to syncthing, or maybe not, the log is unclear..

  • Sorry, I'll go back to installing OVM 2.*, I really have no time for this. Now the entire web-interface is broken, geez. I see you write about it as if it's all reasonably reliable, making me go with the beta, but this is just unusable.

    • Offizieller Beitrag

    Patience... You installed the openmediavault-wol plugin. It has not been ported to datamodels (OMV 3.0.13+). If you remove it, everything should work. apt-get purge openmediavault-wol OMV 3.x is good as long as you are careful which plugins you install.

    omv 7.0.4-2 sandworm | 64 bit | 6.5 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.10 | compose 7.1.2 | k8s 7.0-6 | cputemp 7.0 | mergerfs 7.0.3


    omv-extras.org plugins source code and issue tracker - github


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

  • Is there a "syncthing how to" on the forum of some sort? I see it's the most searched for combi in the box in the upper right.. Must be missing it, but I can't find it. I'd really like not to mess the thing up again, I have syncthing on other systems and am finally ready to have the syncs active on OVM 3* as well.

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!