[SOLVED] rsync job with 0.4.17 not working anymore

minixjr · 2. Februar 2013

Hello together,

my rsync job to backup another NAS is not working anymore, with the new version 0.4.17.
If I use rsync from the cli it work as expected.
In OMV I use the PULL modus and source is like User@IP-address::SRC
The password is correct
The error message is:

Code

Password: @ERROR: auth failed on module raidroot
rsync error: error starting client-server protocol (code 5) at main.c(1524) [Receiver=3.0.7]

Any hints?

Thanks in advance.

JMDG · 2. Februar 2013

Hello,

You are not alone! I have the same problem ...... :o

tekkb · 2. Februar 2013

Check this file with nano /etc/ssh/sshd_config there is a line AllowGroups. See if users is there after root and ssh. If not add it and save file. Reboot and then try Rsync job. Does it work now?

JMDG · 2. Februar 2013

Hello,

In my config it's "root ssh"

tekkb · 2. Februar 2013

Add: users

Then try Rsync job.

minixjr · 2. Februar 2013

Hello tekkbebe,

I have added users and restarted the service ssh (I can't restart the system at the moment).
Unfortunately nothing changed, the error is the same.
I also think it have nothing to do with ssh, because I dont use it with rsync.

tekkb · 2. Februar 2013

Ok, take the users out of config. When I did upgrade on one of my machines there was an issue. Thought it may have been same for you guys.

tekkb · 2. Februar 2013

Could anyone verify that Rsync is still working for them after 4.17 update or does anyone have this issue?????

votdev · 2. Februar 2013

Please check the file '/etc/cron.d/openmediavault-rsync'. If you have enabled email for this rsync job and the comment field contains any data you should definitively check that file, otherwise the changes from 0.4.17 do not affect you.

minixjr · 3. Februar 2013

I have now removed the comment and disabeld the email, but the error is still the same.
If I use the command line from /var/lib/openmediavault/cron.d/rsync-.... , rsync is asking for the password and work as expected.

minixjr · 3. Februar 2013

I think I have found the problem.
The sequence of the commands in /var/lib/openmediavault/cron.d/rsync-... is wrong.
The

Code

env RSYNC_PASSWORD="xxx"

should be in one line with

Code

rsync --verbose --log-file="/var/log/rsync.log" ...

and not with

Code

echo "Please wait, syncing ...

If I change this manually, it is working.

Tom · 3. Februar 2013

Code

Subject:Rsync - Video-Movies [nas]
Body:
Please wait, syncing </media/0b5b8b54-9dad-4775-b874-805d8b0b39d1/wortel/Video/Movies//> to <rsync@192.168.0.123::Backup/Video/Movies> ...\n
sending incremental file list


sent 14679 bytes  received 86 bytes  894.85 bytes/sec
total size is 97209513906  speedup is 6583780.15

Looks fine!

votdev · 4. Februar 2013

Opps...

votdev · 4. Februar 2013

Fixed in openmediavault 0.4.18, see http://blog.openmediavault.org/?p=922

Jetzt mitmachen!