[SOLVED] HP DL360 g6 fans are working at full speed

  • Hi


    I installed on the HP ProLiant DL360 G6 latest OMV.
    Everything was alright. fans was heard only when I start the server.




    I changed the drives to 1TB, also I had to do the upgrade firmware and bios.



    Drives have become visible.
    I did not touch OMV


    Now when OMV is running, fans run at full speed.
    The fans working normally when I go to the BIOS, or run the system from a USB flash drive.



    I tried to install lm-sensors, but I get the error: the package is not installed.


    Is it possible do something about it? or may I neet to reinstall OMV?



    There is a third option: incompatibility OMV with server after update?



    Thanks for your help



    Krzysztof

    • Offizieller Beitrag

    What power setting are you using (look in ILO under Power Management tab -> Settings)? Maybe it is set at static high performance? I would use the dynamic power savings mode.

    omv 7.0-32 sandworm | 64 bit | 6.5 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.9 | compose 7.0.9 | cputemp 7.0 | mergerfs 7.0.3


    omv-extras.org plugins source code and issue tracker - github


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

    • Offizieller Beitrag

    Try installing the backports kernel? There is a button to do that in omv-extras.

    omv 7.0-32 sandworm | 64 bit | 6.5 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.9 | compose 7.0.9 | cputemp 7.0 | mergerfs 7.0.3


    omv-extras.org plugins source code and issue tracker - github


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

  • Heh I can't do this becouse:



    ================= Error =================
    Failed to execute command 'export LANG=C; export DEBIAN_FRONTEND=noninteractive; apt-get --yes --force-yes --fix-missing --allow-unauthenticated --reinstall install openmediavault-omvextrasorg 2>&1': Reading package lists...



    Building dependency tree...



    Reading state information...



    Some packages could not be installed. This may mean that you have
    requested an impossible situation or if you are using the unstable
    distribution that some required packages have not yet been created
    or been moved out of Incoming.
    The following information may help to resolve the situation:



    The following packages have unmet dependencies:
    openmediavault-omvextrasorg : Depends: apt-transport-https but it is not installable
    E: Unable to correct problems, you have held broken packages.=========================================



    Do you know what that means?


    Krzysztof

    • Offizieller Beitrag

    omv-extras has a dependency on the apt-transport-https package. Try apt-get -f install from the command line as root.

    omv 7.0-32 sandworm | 64 bit | 6.5 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.9 | compose 7.0.9 | cputemp 7.0 | mergerfs 7.0.3


    omv-extras.org plugins source code and issue tracker - github


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

  • Hi.


    I do what You say, but still I have the same message.
    When I try to install other packages it is the same situation.


    Unfortunately, I don't know the linux so I can only work on your suggestions.



    Krzysztof

    • Offizieller Beitrag

    Exact error messages help. What is the output of: apt-cache policy apt-transport-https

    omv 7.0-32 sandworm | 64 bit | 6.5 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.9 | compose 7.0.9 | cputemp 7.0 | mergerfs 7.0.3


    omv-extras.org plugins source code and issue tracker - github


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

  • Hi
    I make some progres.


    I fixed my OMV yousing this thread


    Problems with sources.list?


    Now I can instal omv extras lm-sensor.


    When I use pwmconfig it says tehe aren't any PWM sensors, so I can't controll it.


    I tray meny topic (changing pwmconfig file,


    My head hurts by this noise.



    I read somewhere that it might be bad kernel for my processor Xeon, and when I change my kernel I will can control the fan speed.



    It is possible?


    How I can change kernel, and where I can find the right one?



    Why everything works great before? :)



    Please help me!


    Now I have it in my home so I can make changes right away.


    Krzysztof

    • Offizieller Beitrag

    There is a button to install the backports (newer) kernel in omv-extras kernel tab.

    omv 7.0-32 sandworm | 64 bit | 6.5 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.9 | compose 7.0.9 | cputemp 7.0 | mergerfs 7.0.3


    omv-extras.org plugins source code and issue tracker - github


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

  • Thank You!


    I put to the server non-HP hard drive. The server does not detect the temperature of such a disk and turn the fans on 80% power.


    It is not possible to control by a software. I can only physically manipulate in the fans.


    Thanks for Your help!



    Krzysztof

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!