I have set up a new machine with a clean omv installation.
it runs well.
But no HDDs yet added .
I it possible (and how) to install a icecast2 server wich runs paralell to the omv-web-gui without trouble?
I have set up a new machine with a clean omv installation.
it runs well.
But no HDDs yet added .
I it possible (and how) to install a icecast2 server wich runs paralell to the omv-web-gui without trouble?
Have you tried installing it yet, looks like you build it the package from source after that you could set the icecast server to listen on a different port than omv
out of curiousity, I've installed icecast2 from the repos - it's version 2.3.2 rather than 2.4.3 which is the latest
then enabled the daemon by editing this file
and changing enable to true
# Edit /etc/icecast2/icecast.xml and change at least the passwords.
# Change this to true when done to enable the init.d script
ENABLE=true
after that checked the port and Ip the server was listening to
and edited this line
<listen-socket>
<port>8000</port>
<bind-address>YOUR-IP</bind-address> -->
<!-- <shoutcast-mount>/stream</shoutcast-mount> -->
</listen-socket>
then finally started the daemon with
after that i accessed the webui via <YOUR-IP>:8000.. suggest looking at the docs after this as I know nothing about icecast- http://icecast.org/docs/icecast-2.3.2/
Hope this helps,
omv has a plug in for MPD it's part of the extras - http://omv-extras.org/joomla/index.php as for sharing it with ICECAST. I don't really know.
Personally I used emby to access my content remotely but I'm not sure that's what you want.
oh, have you added a data drive to your omv installed yet
not yet, but there is a bit space <300GB on the system hdd
OMV is designed to have a dedicate OS drive with additional data drives, it's not good practice to put data on the OS drive. It can be done though.
Going back to Icecast it looks like you need to mount a local drive. http://icecast.org/docs/icecas…g-file.html#mountsettings
After following suggestion from forum members, i've gone with a SNAP Raid set up. Multiple western digital drives with parity and then a mergefs on top to act a single share point.
i've added a 500GB USB Drive with MP3s on it and changed the mount-part of icecast2, but there is nothing to see under "List Mountpoints"
<mount>
<mount-name>/media/cab31476-6a1d-4325-8edb-e7597da73e72/#MP3/#icecast2/test.mp3</mount-name>
<username>othersource</username>
<password></password>
<max-listeners>1</max-listeners>
<dump-file>/tmp/dump-example1.ogg</dump-file>
<burst-size>65536</burst-size>
<fallback-mount>/example2.ogg</fallback-mount>
<fallback-override>1</fallback-override>
<fallback-when-full>1</fallback-when-full>
<intro>/example_intro.ogg</intro>
<hidden>1</hidden>
<no-yp>1</no-yp>
<authentication type="htpasswd">
<option name="filename" value="myauth"/>
<option name="allow_duplicate_users" value="0"/>
</authentication>
<on-connect>/home/icecast/bin/stream-start</on-connect>
<on-disconnect>/home/icecast/bin/stream-stop</on-disconnect>
</mount>
<mount>
<mount-name>/auth_example.ogg</mount-name>
<authentication type="url">
<option name="mount_add" value="http://myauthserver.net/notify_mount.php"/>
<option name="mount_remove" value="http://myauthserver.net/notify_mount.php"/>
<option name="listener_add" value="http://myauthserver.net/notify_listener.php"/>
<option name="listener_remove" value="http://myauthserver.net/notify_listener.php"/>
</authentication>
</mount>
Alles anzeigen
shouldnt be there tho whole content of the folder "#icecast2" ?
and is it right to change the userpw to >< if there shall be no password?
I dont understand yet how icecast works...
Can it play as an internet-radio or is it just only a server and has to get the music from mpd or so?
Sorry if i my ask silly questions...
[...] <authentication> <!-- Sources log in with username 'source' --> <source-password>password1</source-password> <!-- Relays log in username 'relay' --> <relay-password>password2</relay-password> <!-- Admin logs in with the username given below --> <admin-user>admin</admin-user> <admin-password>password3</admin-password> </authentication>[...]
I dont understand yet how icecast works...
Can it play as an internet-radio or is it just only a server and has to get the music from mpd or so?
Sorry if i my ask silly questions...
No worries, we all start somewhere
My understanding is that Icecast is a streaming server that you can use to push content out onto the internet along with listening to Radio streams via a relay - however I'm doing a bit of educated guessing here as I don't use the software
Icecast is a streaming media (audio/video) server which currently supports Ogg (Vorbis and Theora), Opus, WebM and MP3 streams.
It can be used to create an Internet radio station or a privately running jukebox and many things in between. It is very versatile in that new formats can be added relatively easily and supports open standards for communication and interaction.
MPD is a music streamer that does the same thing but locally, for example I have MPD addon install and pointing at my music directory. This is then available on my two raspberry pi's using Rune Audio - http://www.runeaudio.com/ which I control via MPDroid on my android phone.
IMHO I think the questions you might want to ask is before diving into Icecast are
Once you've answered those you can start choosing the most suitable software to install on your NAS. Plex and Emby work will as stream anywhere solution. Kodi and Samba share work nicely if you have a PC attached to your TV.
There are loads of solutions out there
i just want to only send mp3 to internetradios local in our house,
no video
Think that mpd will do that fine.
Hope it goes well
Sent from my SM-G935F using Tapatalk
i installed mpd too, but i dont get any music, how to setup icecast or mpd to play randomly?
Have you added the folder and run a database up date. There is a mpd client that you can run from the terminal which is handy to check things are working.
Try apt-cache search mpd | grep client
As I forgotten it's name!
Sent from my SM-G935F using Tapatalk
i dont find anything for use under cli.
but i think it maybe mpc?
Now i got it working!
but i need help for setting up autostart of mpd and mpc!
How can i let those commands run at startup:
service mpd start
mpc random
mpc repeat
mpc consume
mpc update
mpc play
?
One thing is strange: My Internet-Radio can play the stream on port 8888 (this radio is based on mpd on a raspberry pi)
but winamp on a xp-machine gets http/1.1 200 OK but doesn't play anything!
does anybody know that?
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!