Installing OMV3 on RPi1

  • I want to install OMV3 on a RPi 1. Although I knew it is not optimal/recommended, I have one laying around and want t use it ...
    In the readme.txt of the Raspberry Pi Images section there is the sentence:

    Zitat

    - works on Raspberry Pi 2 and Raspberry Pi 3 (need to update php5-pam manually to work on RPi1)

    So it seems to work in general, but I don't know how to update manually. Can anybody point me to a guide for that?
    Thanks


    Michael

  • Hi PiUser


    Du kannst es ausprobieren ob es geht weiß ich nicht:
    You can try it whether it is possible I do not know:


    Download vom: https://www.raspberrypi.org/downloads/raspbian/ Raspbian Jessie Lite


    und im putty:
    sudo wget https://www.dropbox.com/s/ypz5pcz9xg3ce0a/omv-install-3.x.sh[/url] && sudo chmod 777 omv-install-3.x.sh && sudo ./omv-install-3.x.sh

    https://github.com/Wolf2000Pi


    OMV6 Hewlett-Packard HPE-411at - Intel Core i7 CPU 870 @ 2.93GHz - 16GB Ram

    Proxmox omv 7 sandworm Dell OptiPlex 7050 i5-6500 CPU @ 3.20GHz - 32GB Ram (Test!!!!)

    3 Mal editiert, zuletzt von Wolf2000 ()

    • Offizieller Beitrag

    You need to compile at least the php5-pam package on the RPi1. I have no interest in doing this because the RPi1 is too slow.

    omv 7.0-32 sandworm | 64 bit | 6.5 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.9 | compose 7.0.9 | cputemp 7.0 | mergerfs 7.0.3


    omv-extras.org plugins source code and issue tracker - github


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!