Dear All,
basically I made now my first experiences with OMV and also with Linux due I want to exchange my whole Wind*** infrastructure to Linux based systems.
My first project is to set up a NAS system with Banana Pro and OMV with following SW configuration:
OMV Version 2.2.13
Prozessor ARMv7, rev4
Kernel: 3.4.108+
I still know that NTFS formatted HDD are not recommanded for using at Linux environments, but at the moment I have some free space issues due I can not park all data at the moment on a separat disk.
Anyhow I connected and mounted my 250GB Hitachi HDD via USB to the Banana and released access to it also via FTP.
Then I wanted to copy data from my Synology NAS direct to the HDD at the Banana. Therefore I established a direct remote connection from the synology to the Banana via FTP. Then I started to copy some media files.
After one or two minutes the Banana turned off without any notification.
I tried the mentioned procedure several times with same results.
Due that I decided to connect the HDD via SATA to the Banana and tried to copy the files again with the Synology NAS. With success
Then I tried again to connect the HDD to USB and the Banana shut down without any notification.
My question is now how I can check if there is any log available which references to this behavior?
I would appreciate if somebody can give me a hint or introduction how I can figure out this?
Kindly Regards,
chivas