Bad 502 Gateway NGINX, fresh install

  • Chaps,


    Not an expert by anymean, but I have exhausted most of my skills, think I have and issue between NGINX and PHP Fast CGI


    I am getting the following error when opening the WebGUI for omv:


    502 Bad gateway error NGINX,



    on raspberry pi, freshly installed.


    I can SSH into the IP address.



    in the var/log.nginx/openmediavault-webgui_error.log


    "GET / HTTP/1.1", upstream: "fastcgi://unix:/var/run/php5-fpm-openmediavault-webgui.sock:", host: "10.10.10.100"
    2017/02/08 21:25:09 [crit] 1493#0: *1 connect() to unix:/var/run/php5-fpm-openmediavault-webgui.sock failed (2: No such file or directory) while


    indeed I see no such /var/run/php5-fpm-openmediavault-webgui.sock



    I run the following versions:


    root@raspberrypi:/var/run# dpkg -l | grep openm
    rc openmediavault 3.0.59 all Open network attached storage solution
    rc openmediavault-flashmemory 3.4.3 all folder2ram plugin for OpenMediaVault
    ii openmediavault-keyring 1.0 all GnuPG archive keys of the OpenMediaVault archive
    rc openmediavault-omvextrasorg 3.4.16 all OMV-Extras.org Package Repositories for OpenMediaVault
    rc openmediavault-resetperms 3.2 all Reset Permissions





    root@raspberrypi:/usr/share/openmediavault# systemctl restart php5-fpm
    Job for php5-fpm.service failed. See 'systemctl status php5-fpm.service' and 'journalctl -xn' for details.


    looking into systemctl php5:


    127 loaded units listed. Pass --all to see loaded but inactive units, too.
    To show all installed unit files use 'systemctl list-unit-files'.
    root@raspberrypi:/usr/share/openmediavault#
    root@raspberrypi:/usr/share/openmediavault# systemctl status php5-fpm.service
    â— php5-fpm.service - The PHP FastCGI Process Manager
    Loaded: loaded (/lib/systemd/system/php5-fpm.service; enabled)
    Active: failed (Result: signal) since Thu 2017-02-09 23:11:47 CST; 48s ago
    Process: 5720 ExecStart=/usr/sbin/php5-fpm --nodaemonize --fpm-config /etc/php5/fpm/php-fpm.conf (code=killed, signal=ILL)
    Process: 5713 ExecStartPre=/usr/lib/php5/php5-fpm-checkconf (code=exited, status=0/SUCCESS)
    Main PID: 5720 (code=killed, signal=ILL)


    Feb 09 23:11:47 raspberrypi php5-fpm-checkconf[5713]: Illegal instruction
    Feb 09 23:11:47 raspberrypi systemd[1]: php5-fpm.service: main process exited, code=killed, status=4/ILL
    Feb 09 23:11:47 raspberrypi systemd[1]: Failed to start The PHP FastCGI Process Manager.
    Feb 09 23:11:47 raspberrypi systemd[1]: Unit php5-fpm.service entered failed state.


    I seem to be unable to tie the two together but I would reckon that as long as php-fpm is not running, I am flogging a dead horse.
    please not that this is an unchanged image.


    I know there is an existing post on this forum that touches parts of what I am seeing, but doesnt seem to be the same issue.


    thanks guys

  • Thanks bud,


    when installing openmediavault as you suggested,



    I get an error related to php5-fpm:


    Unpacking openmediavault (3.0.59) ...
    Setting up php5-fpm (5.6.29+dfsg-0+deb8u1) ...
    Job for php5-fpm.service failed. See 'systemctl status php5-fpm.service' and 'journalctl -xn' for details.
    invoke-rc.d: initscript php5-fpm, action "start" failed.
    dpkg: error processing package php5-fpm (--configure):
    subprocess installed post-installation script returned error exit status 1
    dpkg: dependency problems prevent configuration of openmediavault:
    openmediavault depends on php5-fpm; however:
    Package php5-fpm is not configured yet.


    dpkg: error processing package openmediavault (--configure):
    dependency problems - leaving unconfigured
    Errors were encountered while processing:
    php5-fpm
    openmediavault



    The way I installed is is by downloading the 3.0.5 Img -file (of sourceforge) and putting it on an SD card.

    • Offizieller Beitrag

    Is the an RPi1? OMV 3.x doesn't work on the rpi1 because the php5-pam package is not compiled for it.

    omv 7.0-32 sandworm | 64 bit | 6.5 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.9 | compose 7.0.9 | cputemp 7.0 | mergerfs 7.0.3


    omv-extras.org plugins source code and issue tracker - github


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!