OMV Sensors some information is missing

root@server:~# sensors
radeon-pci-0008
Adapter: PCI adapter
temp1:        +25.0°C  (crit = +120.0°C, hyst = +90.0°C)


k10temp-pci-00c3
Adapter: PCI adapter
temp1:        +25.2°C  (high = +70.0°C)
                       (crit = +70.0°C, hyst = +69.0°C)


fam15h_power-pci-00c4
Adapter: PCI adapter
power1:           N/A  (crit =  25.00 W)

# sensors-detect revision $Revision$
# Board: ASRock AM1H-ITX
# Kernel: 4.9.0-0.bpo.3-amd64 x86_64
# Processor: AMD Athlon(tm) 5350 APU with Radeon(tm) R3 (22/0/1)


Running in automatic mode, default answers to all questions
are assumed.


Some south bridges, CPUs or memory controllers contain embedded sensors.
Do you want to scan for them? This is totally safe. (YES/no):
Silicon Integrated Systems SIS5595...                       No
VIA VT82C686 Integrated Sensors...                          No
VIA VT8231 Integrated Sensors...                            No
AMD K8 thermal sensors...                                   No
AMD Family 10h thermal sensors...                           No
AMD Family 11h thermal sensors...                           No
AMD Family 12h and 14h thermal sensors...                   No
AMD Family 15h thermal sensors...                           No
AMD Family 16h thermal sensors...                           Success!
    (driver `k10temp')
AMD Family 15h power sensors...                             No
AMD Family 16h power sensors...                             Success!
    (driver `fam15h_power')
Intel digital thermal sensor...                             No
Intel AMB FB-DIMM thermal sensor...                         No
Intel 5500/5520/X58 thermal sensor...                       No
VIA C7 thermal sensor...                                    No
VIA Nano thermal sensor...                                  No


Some Super I/O chips contain embedded sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no):
Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor/ITE'...               No
Trying family `SMSC'...                                     No
Trying family `VIA/Winbond/Nuvoton/Fintek'...               Yes
Found `Nuvoton NCT5573D/NCT5577D/NCT6776F Super IO Sensors' Success!
    (address 0x290, driver `nct6775')
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor/ITE'...               No
Trying family `SMSC'...                                     No
Trying family `VIA/Winbond/Nuvoton/Fintek'...               No
Trying family `ITE'...                                      No


Some systems (mainly servers) implement IPMI, a set of common interfaces
through which system health data may be retrieved, amongst other things.
We first try to get the information from SMBIOS. If we don't find it
there, we have to read from arbitrary I/O ports to probe for such
interfaces. This is normally safe. Do you want to scan for IPMI
interfaces? (YES/no):
Probing for `IPMI BMC KCS' at 0xca0...                      No
Probing for `IPMI BMC SMIC' at 0xca8...                     No


Some hardware monitoring chips are accessible through the ISA I/O ports.
We have to write to arbitrary I/O ports to probe them. This is usually
safe though. Yes, you do have ISA I/O ports even if you do not have any
ISA slots! Do you want to scan the ISA I/O ports? (yes/NO):


Lastly, we can probe the I2C/SMBus adapters for connected hardware
monitoring devices. This is the most risky part, and while it works
reasonably well on most systems, it has been reported to cause trouble
on some systems.
Do you want to probe the I2C/SMBus adapters now? (YES/no):
Using driver `i2c-piix4' for device 0000:00:14.0: AMD Hudson-2 SMBus
Module i2c-dev loaded successfully.


Next adapter: SMBus PIIX4 adapter port 0 at 0b00 (i2c-0)
Do you want to scan it? (yes/NO/selectively):


Next adapter: SMBus PIIX4 adapter port 2 at 0b00 (i2c-1)
Do you want to scan it? (yes/NO/selectively):


Next adapter: SMBus PIIX4 adapter port 3 at 0b00 (i2c-2)
Do you want to scan it? (yes/NO/selectively):


Next adapter: SMBus PIIX4 adapter port 4 at 0b00 (i2c-3)
Do you want to scan it? (yes/NO/selectively):


Next adapter: SMBus PIIX4 adapter port 1 at 0b20 (i2c-4)
Do you want to scan it? (yes/NO/selectively):


Next adapter: Radeon i2c bit bus 0x90 (i2c-5)
Do you want to scan it? (yes/NO/selectively):


Next adapter: Radeon i2c bit bus 0x91 (i2c-6)
Do you want to scan it? (yes/NO/selectively):


Next adapter: Radeon i2c bit bus 0x92 (i2c-7)
Do you want to scan it? (yes/NO/selectively):


Next adapter: Radeon i2c bit bus 0x93 (i2c-8)
Do you want to scan it? (yes/NO/selectively):


Next adapter: Radeon i2c bit bus 0x94 (i2c-9)
Do you want to scan it? (yes/NO/selectively):


Next adapter: Radeon i2c bit bus 0x95 (i2c-10)
Do you want to scan it? (yes/NO/selectively):


Next adapter: Radeon i2c bit bus 0x96 (i2c-11)
Do you want to scan it? (yes/NO/selectively):


Next adapter: Radeon i2c bit bus 0x97 (i2c-12)
Do you want to scan it? (yes/NO/selectively):




Now follows a summary of the probes I have just done.


Driver `k10temp' (autoloaded):
  * Chip `AMD Family 16h thermal sensors' (confidence: 9)


Driver `nct6775':
  * ISA bus, address 0x290
    Chip `Nuvoton NCT5573D/NCT5577D/NCT6776F Super IO Sensors' (confidence: 9)


Driver `fam15h_power' (autoloaded):
  * Chip `AMD Family 16h power sensors' (confidence: 9)


Do you want to generate /etc/sysconfig/lm_sensors? (yes/NO):
To load everything that is needed, add this to one of the system
initialization scripts (e.g. /etc/rc.d/rc.local):


#----cut here----
# Chip drivers
modprobe nct6775
/usr/bin/sensors -s
#----cut here----


You really should try these commands right now to make sure everything
is working properly. Monitoring programs won't work until the needed
modules are loaded.


Unloading i2c-dev... OK