Is ZFS supported in Kernel 4.13?

    • OMV 4.x (testing)
    • Resolved
    • Upgrade 3.x -> 4.x

    This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

    • New

      Up.
      There is some way to delete the voice from ZFS plug-in and them import it again?

      Also looking in syslog I found this:
      monit[1456]: 'mountpoint_ZFS' status field (1) -- /ZFS is not a mountpoint
      Intel G4400 - Asrock H170M pro4s - 8GB ram - 2x4TB WD RED in RAID1 - 1TB Seagate 7200.12
      OMV 3.0.79 - Kernel 4.9 backport 3 - omvextrasorg 3.4.25

      The post was edited 1 time, last by Blabla ().

    • New

      Blabla wrote:


      I don't get how can I remove a pool from the ZFS plug-in. Delete will delete the pool or it will simplyh delete it from the plug-in ?
      If you delete the pool in the plugin, the pool itself is gone. The plugin is just a way to work with ZFS without having to do it on the command line.

      On the other hand, if you do something to a ZFS pool, on the command line, the results show up in the plugin (in most cases).
      Good backup takes the "drama" out of computing
      ____________________________________
      OMV 3.0.95 Erasmus
      ThinkServer TS140, 12GB ECC / 32GB USB3.0
      4TB SG+4TB TS ZFS mirror/ 3TB TS

      OMV 3.0.95 Erasmus - Rsync'ed Backup
      R-PI 2 $29 / 16GB SD Card $8 / Real Time Clock $1.86
      4TB WD My Passport $119
    • New

      Blabla wrote:

      Up.
      There is some way to delete the voice from ZFS plug-in and them import it again?
      What is "the voice"?
      Good backup takes the "drama" out of computing
      ____________________________________
      OMV 3.0.95 Erasmus
      ThinkServer TS140, 12GB ECC / 32GB USB3.0
      4TB SG+4TB TS ZFS mirror/ 3TB TS

      OMV 3.0.95 Erasmus - Rsync'ed Backup
      R-PI 2 $29 / 16GB SD Card $8 / Real Time Clock $1.86
      4TB WD My Passport $119
    • New

      solved the problem thanks to the log:
      1. uninstalled ZFs plugin
      2. deleted every folder inside /ZFS after checking that they were empty
      3. installed the plug-in, now the ZFS pool isn't already imported
      4. imported my pool and now is working
      Intel G4400 - Asrock H170M pro4s - 8GB ram - 2x4TB WD RED in RAID1 - 1TB Seagate 7200.12
      OMV 3.0.79 - Kernel 4.9 backport 3 - omvextrasorg 3.4.25
    • Users Online 1

      1 Guest