SMB copy speed not stable, Win7/Ubuntu18.10 to smb share on Odroid HC1

  • Dear community,


    I'm a omv newbie.


    I''ve setup an Odroid HC1, omv4 image on µsd card and a MX500 ssd.
    The HC1, Windows 7, Ubuntu 18.1 are connected to a gigabit switch (cat 5e/6 cables).


    I face the issue that the write speed from Win/Ubuntu is not stable, sometimes the files are transferred with 103MB/s an then just with some 1-10MB/s.
    Here's an example while copying a vmware vm, see attached jpg.


    I tried different setting in but nothing what fixed it, this is the current 'extra options'
    min receivefile size = 16384
    write cache size = 524288
    getwd cache = yes
    socket options = TCP_NODELAY IPTOS_LOWDELAY
    use sendfile = yes
    protocol = SMB2


    Next i tried to configure IRQs to big cpu and the govener to conservative/performance.
    Same issue sometimes the files are transferred like a charm and then like 10y ago. :(


    Any help or lead is really appreciated.
    I cannot judge if it's a hw/sw issue.



    omv_starter

    • Offizieller Beitrag

    Take a look at this post with common problems. Tuning Samba is item 5 but, as I understand it, Samba has been pre-tuned in SBC images.


    Where are you copying to/from? That appears to be a Windows VM..?
    If you're running tests, perhaps you should copy to/from a client running on real hardware. VM performance can be "iffy".

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!