UrBackup - need to set shared folder new after reboot?!?

  • Hi,
    after a reboot of my OMV-Box, I get an error in the UrBackup interface that the backup folder is not reachable. I did not find a problem with permissions. The only way to resolve this is deleting the share for my main UrBackup-folder and put it up new.Why is that?
    Any idea how I could solve this?


    I get a Samba-panic alert as well after reboot - is this connected? But the Urbackup share is not setup as samba-share. So I do not thing this is the same problem.


    Any hint would be nice.
    Thanks.
    Best.
    Fabian

    MoBo: Fujitsu D3417-B
    CPU: Intel Celeron G3900
    RAM: Samsung DDR4 - 8 GB ECC
    Case: Fractal Design Node 80
    HDD: SSD 64GB (System), 2*3TB+1*4TB (Data) + 1*4TB (Parity). UnionFS + Snapraid
    OMV 4
    Router: Fritzbox 7590

    • Offizieller Beitrag

    Are you using the urbackup plugin or docker? Is the share you are using a local filesystem? If so, what kind and is it a usb drive?

    omv 7.0-32 sandworm | 64 bit | 6.5 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.9 | compose 7.0.9 | cputemp 7.0 | mergerfs 7.0.3


    omv-extras.org plugins source code and issue tracker - github


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

  • Are you using the urbackup plugin or docker? Is the share you are using a local filesystem? If so, what kind and is it a usb drive?

    I am using the Plugin.
    The share is on internal HDDs (unionFS + Snapraid). All via SATA.


    Thanks.
    Best.
    Fabian

    MoBo: Fujitsu D3417-B
    CPU: Intel Celeron G3900
    RAM: Samsung DDR4 - 8 GB ECC
    Case: Fractal Design Node 80
    HDD: SSD 64GB (System), 2*3TB+1*4TB (Data) + 1*4TB (Parity). UnionFS + Snapraid
    OMV 4
    Router: Fritzbox 7590

    • Offizieller Beitrag

    Sounds like your drive(s) may not be ready when the urbackup service starts. So, it still thinks it isn't ready?? Just guessing. I don't use urbackup though.

    omv 7.0-32 sandworm | 64 bit | 6.5 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.9 | compose 7.0.9 | cputemp 7.0 | mergerfs 7.0.3


    omv-extras.org plugins source code and issue tracker - github


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

  • Sounds like your drive(s) may not be ready when the urbackup service starts. So, it still thinks it isn't ready?? Just guessing. I don't use urbackup though.

    So if I wait a little all will be fine?
    I will try...but I do not have some hope...lets see.
    Thanks.
    Fabian

    MoBo: Fujitsu D3417-B
    CPU: Intel Celeron G3900
    RAM: Samsung DDR4 - 8 GB ECC
    Case: Fractal Design Node 80
    HDD: SSD 64GB (System), 2*3TB+1*4TB (Data) + 1*4TB (Parity). UnionFS + Snapraid
    OMV 4
    Router: Fritzbox 7590

  • Could it be a problem with permissions?


    Who should bee the owner of the UrBackup backup folder? Who should have permission?


    Thanks.


    F.

    MoBo: Fujitsu D3417-B
    CPU: Intel Celeron G3900
    RAM: Samsung DDR4 - 8 GB ECC
    Case: Fractal Design Node 80
    HDD: SSD 64GB (System), 2*3TB+1*4TB (Data) + 1*4TB (Parity). UnionFS + Snapraid
    OMV 4
    Router: Fritzbox 7590

  • checked in ACL: user and group "urbackup" have read/write permission

    Ok, I will check this tonight.
    I am not at my server now.
    Thanks.
    Fabian

    MoBo: Fujitsu D3417-B
    CPU: Intel Celeron G3900
    RAM: Samsung DDR4 - 8 GB ECC
    Case: Fractal Design Node 80
    HDD: SSD 64GB (System), 2*3TB+1*4TB (Data) + 1*4TB (Parity). UnionFS + Snapraid
    OMV 4
    Router: Fritzbox 7590

  • So I checked it...this is how it is:

    Is this OK?
    Thanks.
    F.

    MoBo: Fujitsu D3417-B
    CPU: Intel Celeron G3900
    RAM: Samsung DDR4 - 8 GB ECC
    Case: Fractal Design Node 80
    HDD: SSD 64GB (System), 2*3TB+1*4TB (Data) + 1*4TB (Parity). UnionFS + Snapraid
    OMV 4
    Router: Fritzbox 7590

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!