Is there a procedure to move the Boot volume to another device?
Thank you
Move Boot from USB Flash Stick to SATA or to another USB Device
-
- OMV 4.x
- ajaja
-
-
Is there a procedure to move the Boot volume to another device?
Boot from clonezilla
Clone usb stick to other drive.
remove original usb stick
set bios to boot from new device
done. -
it is possible to do this on a separate Pc?
old boot usb stick
and
[USB adapterkabel SSD] in a laptop,
booting clonezilla, copy data,
than
[USB adapterkabel SSD] in the HP ProLiant MicroServer Gen8and done?
-
it is possible to do this on a separate Pc?
Yes
-
I do this by the Clonezilla plugin which already exists when you install OMV, but you can do this wherever you can launch Clonezilla Live
-
oh id didnt know that, i used e separate pc and it did work.
but after booting the the new ssd with the old data, the eth1 and eth2 did switch to eno1 and eno2.
so i could not see the no network was visible.
with attaches monitor and Konsole ifconfig i could see this.with:
ifconfig eno1 192.168.100.1 netmask 255.255.255.240
i changed the data from something to the correct ip and netmask, so i could open the OMV with browser.in OMV Network i deleted the old eth1 and searched for a new one which is the eno1, reboot, and everything is fine.
after this i enlarged the boot and swap partition with GParted on external linux.
first deleting everything but boot, than enlarging boot and new(larger) swap partition.
after the first boot, i received some zombies, but now everything is fine 2.0. -
Boot from clonezillaClone usb stick to other drive.
remove original usb stick
set bios to boot from new device
done.This works great and helped me much to do the Subj, thanks!
I used bootables clonezilla and gparted to do the job on my HP Microserver N54l
Jetzt mitmachen!
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!