This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

    • Hello, I do not know why I can not add a second NIC card

      Source Code

      1. OMV\ExecException: Failed to execute command 'export PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin; export LANG=C.UTF-8; systemctl start 'networking' 2>&1' with exit code '1': Job for networking.service failed because the control process exited with error code. See "systemctl status networking.service" and "journalctl -xe" for details. in /usr/share/php/openmediavault/system/process.inc:182 Stack trace: #0 /usr/share/php/openmediavault/system/systemctl.inc(86): OMV\System\Process->execute(Array, 1) #1 /usr/share/php/openmediavault/system/systemctl.inc(146): OMV\System\SystemCtl->exec('start', NULL, false) #2 /usr/share/openmediavault/engined/module/networking.inc(44): OMV\System\SystemCtl->start() #3 /usr/share/openmediavault/engined/rpc/config.inc(194): OMVModuleNetworking->startService() #4 [internal function]: OMVRpcServiceConfig->applyChanges(Array, Array) #5 /usr/share/php/openmediavault/rpc/serviceabstract.inc(123): call_user_func_array(Array, Array) #6 /usr/share/php/openmediavault/rpc/serviceabstract.inc(149): OMV\Rpc\ServiceAbstract->callMethod('applyChanges', Array, Array) #7 /usr/share/php/openmediavault/rpc/serviceabstract.inc(565): OMV\Rpc\ServiceAbstract->OMV\Rpc\{closure}('/tmp/bgstatusVT...', '/tmp/bgoutput7A...') #8 /usr/share/php/openmediavault/rpc/serviceabstract.inc(159): OMV\Rpc\ServiceAbstract->execBgProc(Object(Closure)) #9 /usr/share/openmediavault/engined/rpc/config.inc(213): OMV\Rpc\ServiceAbstract->callMethodBg('applyChanges', Array, Array) #10 [internal function]: OMVRpcServiceConfig->applyChangesBg(Array, Array) #11 /usr/share/php/openmediavault/rpc/serviceabstract.inc(123): call_user_func_array(Array, Array) #12 /usr/share/php/openmediavault/rpc/rpc.inc(86): OMV\Rpc\ServiceAbstract->callMethod('applyChangesBg', Array, Array) #13 /usr/sbin/omv-engined(536): OMV\Rpc\Rpc::call('Config', 'applyChangesBg', Array, Array, 1) #14 {main}
      in web interface I do not see cards but in SchelBox yes

      Source Code

      1. 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
      2. link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
      3. inet scope host lo
      4. valid_lft forever preferred_lft forever
      5. inet6 ::1/128 scope host
      6. valid_lft forever preferred_lft forever
      7. 2: enp5s1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
      8. link/ether ec:08:6b:00:0e:d8 brd ff:ff:ff:ff:ff:ff
      9. inet brd scope global enp5s1
      10. valid_lft forever preferred_lft forever
      11. 3: enp6s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
      12. link/ether 50:e5:49:37:e1:c1 brd ff:ff:ff:ff:ff:ff
      13. inet brd scope global enp6s0
      Display All
      [Blocked Image: https://i.ibb.co/QbscRRW/NIC.jpg][Blocked Image: https://ibb.co/K0CGkkt]

      The post was edited 3 times, last by damian87ew ().

    • The System|Network|Interfaces tab only displays configured devices AND ONLY the configured infos. The network interface dashboard widget will display all interfaces with their current IP/MAC/... instead.
      Absolutely no support through PM!

      I must not fear.
      Fear is the mind-killer.
      Fear is the little-death that brings total obliteration.
      I will face my fear.
      I will permit it to pass over me and through me.
      And when it has gone past I will turn the inner eye to see its path.
      Where the fear has gone there will be nothing.
      Only I will remain.

      Litany against fear by Bene Gesserit