Can't complete a smartctl -t long since upgrading from OMV 3 to OMV 4

    • OMV 4.x

    This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

    • Can't complete a smartctl -t long since upgrading from OMV 3 to OMV 4

      I upgraded from OMV 3 to OMV 4 in the beginning of this year. Ever since then when I run smartctl -long (or try the long test from the interface) it never completes. It just get's to 90%, hangs there for about 24 hours, then fails to complete with "Aborted by host 10%"

      If it were just one disk, I'd say maybe the disk is on its way out. However, this literally happened to all 8 of my disks (ZFS RaidZ2) at the same time, which is making me think this has to be some software glitch, especially since it's been happening since the upgrade. Is there anything I can do to possibly get to the bottom of this? I usually like to scrub once a month and do a long test once a month on all of the disks. Scrubs complete no problem usually around 72 hours give or take a few. Short tests complete no problem and all looks good with the data when a short test is completed.
      Case: U-NAS NSC-810
      Motherboard: ASRock - C236 WSI Mini ITX
      CPU: Core i7-6700
      Memory: 32GB Crucial DDR4-2133
    • Revers62 wrote:

      Aborted by host :

      this is the symptom when you turn off your server before the end of the test

      Do you have autoshutdown ?
      I usually auto shutdown every night at 1130 pm and auto wakeup at 730 am. I do however disable the shutdown when I'm scrubbing and checking with smart. However it's been getting stuck at 90% for 24 hours then cancels itself with that error.
      Case: U-NAS NSC-810
      Motherboard: ASRock - C236 WSI Mini ITX
      CPU: Core i7-6700
      Memory: 32GB Crucial DDR4-2133