Webgui not load or so slow

    • OMV 4.x

    This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

    • Webgui not load or so slow

      hi
      i install omv4 on my old pc
      Cpu: Intel® Pentium® 4 Processor 630 supporting HT Technology
      Ram : 2 Gb
      Hard Disk : 80 Gb [connected with IDE cable]

      connect that to my router with cable . after update and upgrade omv-initsystem get below error

      Source Code

      1. W: mdadm: /etc/mdadm/mdadm.conf defines no arrays.
      2. W: mdadm: no arrays defined in configuration file
      after that i connect other pc with cable to router and try to open Webgui
      Webgui not load or open after 5 or 7 min so i can't login to webgui ( i cant access that from WiFi at all)
      i try other Thread solution but it's not helpful
      if you need more detailed mention
      thank you for your help
    • NXEW wrote:

      W: mdadm: /etc/mdadm/mdadm.conf defines no arrays.
      W: mdadm: no arrays defined in configuration file
      These are not errors, just warnings. They are telling you that the system did not find any RAID. Which is probably ok.


      NXEW wrote:

      after that i connect other pc with cable to router and try to open Webgui
      How do you try? Putting the IP of OMV in the browser?
      Make sure to double check which IP has been assigned to your server by the router.
      Odroid HC2 - armbian - Seagate ST4000DM004 - OMV4.x
      Asrock Q1900DC-ITX - 16GB - 2x Seagate ST3000VN000 - Intenso SSD 120GB - OMV4.x
      :!: Backup - Solutions to common problems - OMV setup videos - OMV4 Documentation - user guide :!:
    • macom wrote:

      NXEW wrote:

      W: mdadm: /etc/mdadm/mdadm.conf defines no arrays.
      W: mdadm: no arrays defined in configuration file
      These are not errors, just warnings. They are telling you that the system did not find any RAID. Which is probably ok.

      NXEW wrote:

      after that i connect other pc with cable to router and try to open Webgui
      How do you try? Putting the IP of OMV in the browser?Make sure to double check which IP has been assigned to your server by the router.
      i put ip address in the browser
      i am sure ip is correct. i have been cheaked that in router and omv ip address with
      ip addr and omv-firstaisd > configure web control panel