Hello,
I have trouble with my OMV mounted on raspberry Pi 3. Every time I restart the Raspberry the system didn't recognize the 2 hard drives plugged in the usb ports.
I can't mount the drives in the file system's tab and I lost the data. I have tried to delay the boot with the command "rootdelay" but it doesn't work.
Please help me.
Thank's
Problem with Hard Drives
-
- OMV 4.x
- MarcoDax
-
-
Did you configure any type of RAID with the disks manually by CLI? OMV doesn´t support RAID for USB devices in the WebUI.
-
No, I don't use raid configuration. I only use shared folder. But when I restart the raspberry the system doesn't recognize the hard drives.
Thank's -
It is often a power supply problem of the RPi, especially when usb drives without own power supply are connected. Did you use the original power supply of the RPi, which belongs to the Pi3?
You could test with only one drive connected. -
The hard drives have external case with own power supply. I have tried a lot of fix but every time the system's reboot the problem come.
Thank's -
Try a powered USB hub with the external HDDs plugged into it and the hub then plugged into the RaspPI3 (?). Are they USB3.0 HDDS? Seems I've read posts about USB3.0 being an issue for external drives. What filesystem on the HDDS?
-
I'll try but it doesn't work. I'm going to abandon the project.
Thank's to everyone that answered -
It´s a pity if we could not help and you want to give up your project because of that.
Jetzt mitmachen!
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!