Slow E350 system with Dockers

    This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

    • Slow E350 system with Dockers

      New

      Hello I am new to openmediavault but I have a litlle experience with debian as a headless homeserver.
      I have OMV4 installed on a passive E350-ITX mainboard with 6gb ram.
      With my previous debian setup I ran Transmission, Emby, sonarr radarr, tvheadend, etc with no isues.
      With the new OMV setup everything runs very SLOW.
      I have tried to install Jellyfin the normal way (command line) but that failed. But I have read here on the forums that the 'new way' of installing applications is via a docker.
      I am new to docker, but I have installed bazarr, jellyfin, ombi, radarr, lidarr, sonarr and deluge.
      When I acces the webui of the applications everything loads slowly.
      I don't know what i am doing wrong.

      The green memory-bar is always at 90% of the 6GB Ram installed.
      I have included messages.txt with a lot of errors the syslog-file was to big to upload here.

      IS there someone that can help me a hand? :)

      Kind regards
      Files
      • messages.txt

        (13.21 kB, downloaded 9 times, last: )
    • New

      For the Jellyfin part of the issues installing directly on the OS (no docker):

      I see on your messages.txt a different/incomplete URL for the repo:

      Yellyfin's repo URL:
      https://repo.jellyfin.org/debian[/url] $( lsb_release -c -s ) main
      Your repo URL:
      https://repo.jellyfin.org/debian[/url] $( Release

      Then fails with a clear 404 error:
      Failed to fetch https://repo.jellyfin.org/debian/dists/$(/lsb_stretch/binary-amd64/Packages 404 Not Found
      omv 4.1.22-1 - Bevy NUC thanks to TechnoDadLife (NUC5CPYB)
      Celeron N3050 @ 1.60GHz - 8GB RAM - 4 external disks via USB3.0 - Gigabit Ethernet - LOTS OF CONTAINERS! :)
    • New

      Maybe try the codes on the documentation page again? (jellyfin.readthedocs.io/en/lat…istrator-docs/installing/)

      echo "deb [arch=$( dpkg --print-architecture )] https://repo.jellyfin.org/debian $( lsb_release -c -s ) main" | sudo tee /etc/apt/sources.list.d/jellyfin.list

      Will have to get the wrong one out of /etc/apt/sources.list.d/jellyfin.list

      Watch out for copy/paste from html. Best to get text into an editor first to be sure no formatting from the website gets in the command. Has happened to me (a lot). Just a friendly reminder :)
      omv 4.1.22-1 - Bevy NUC thanks to TechnoDadLife (NUC5CPYB)
      Celeron N3050 @ 1.60GHz - 8GB RAM - 4 external disks via USB3.0 - Gigabit Ethernet - LOTS OF CONTAINERS! :)
    • Users Online 1

      1 Guest