Hi guys,
my new NAS build isn't running as smooth as I want it. I suspect the CPU or MoBo is faulty. I have been using the build only for a few days, but I noticed that sometimes the PC doesn't startup. It starts the HDD and fans, but there is no video output or power to the USB devices. After a few seconds it shuts down and tries to start again... If you try it often enough, it will work at some point, but then I got this error message on screen and the PC shut down again.
Question is: What could cause this issue? I would think it's CPU or MoBo.
I tried to reset the CMOS, change the RAM location, tried with another PSU and updated the BIOS/UEFI.
| INTEL Core i3-8100T, 4x 3.10GHz, tray | ||||
| ASROCK H370M-ITX/ac | ||||
| G.SKILL Value 4 DIMM 8GB, DDR4-2133, CL15-15-15-35 | ||||
| SilverStone SFX Series ST30SF (Rev. 1.0) 300W SFX12V | ||||
| ARCTIC Freezer 12 CO | ||||
| CORSAIR Force Series MP510 240GB, M.2 |
a 8TB WD Red is also installed.
Thank for some help!