Hi,
I`m using Rock64 with OMV 4. I observe after reboot from time to time disk is not mounted, is not visible from GUI. I need to disconnect disk, make another reboot, after OMV is running connect disk again - than everything is fine until next reboot.
Is it any solutions for this problem?
I setup weekly automatic reboot.
Rock64 not mount disk after reboot
-
- OMV 4.x
- maciekelga
-
-
Is the disk in a powered USB enclosure?
Maybe the rock64 wants to mount the drive when the enclosure is not ready, yet.
Try to add mount -a as scheduled job at reboot or delay the mounting of the drive.
-
Yes, is a WD disk connected via USB - SATA converter.
I will check tommorow, with mount-a command.
Wysłane z mojego NEM-L21 przy użyciu Tapatalka
-
I add command to mount a disk after reboot, check few times, it did not help.
Any solutions?Wysłane z mojego Redmi Note 7 przy użyciu Tapatalka
-
-
I will check tommorow, with mount-a command.
The command should be mount -a. There is a space between the "mount" and the "-a"
When you turn on the Rock64, does the disk spin up?
-
Yes, of course there was a space between.
Yes, it spin up.Wysłane z mojego Redmi Note 7 przy użyciu Tapatalka
-
If you turn on Rock64 and the HDD spins up, but the filesystem is not mounted, can you try mount -a from CLI?
And what is the output of blkid?
-
If you turn on Rock64 and the HDD spins up, but the filesystem is not mounted, can you try mount -a from CLI?
And what is the output of blkid?
To be honest I didn`t try mount -a from CLI, only from web interface in scheduled tasks I add a new task with mount -a command.
Output of blkid
Code/dev/mmcblk1p6: SEC_TYPE="msdos" LABEL="boot" UUID="9EDC-9F0B" TYPE="vfat" PARTLABEL="boot" PARTUUID="fa7b8eca-ad12-475c-8dcf-1c6a59d813fd" /dev/mmcblk1p7: LABEL="linux-root" UUID="b8c23142-1f40-4ed3-b46f-9b0c786e5583" TYPE="ext4" PARTLABEL="root" PARTUUID="35eb320a-8fd2-47c0-be33-c4ffe655f753" /dev/sda1: LABEL="NAS" UUID="37ed4398-0796-40a6-b01f-a6b35a6111a5" TYPE="ext4" PARTUUID="4c50a175-dc8d-40ef-9d97-64ac98aae56e" /dev/mmcblk1: PTUUID="b2dd447e-398e-4430-b563-56a38fa1ed42" PTTYPE="gpt" /dev/mmcblk1p1: PARTLABEL="loader1" PARTUUID="4247738d-4f5e-45be-96f6-472a2f59a804" /dev/mmcblk1p2: PARTLABEL="reserved1" PARTUUID="152441f4-fbde-4742-a0cd-39bb1b4e8a71" /dev/mmcblk1p3: PARTLABEL="reserved2" PARTUUID="9ad6fe91-3f12-4920-baa1-fe2158e7d972" /dev/mmcblk1p4: PARTLABEL="loader2" PARTUUID="12a38b07-2d50-4808-9ccc-d9b03eeafca4" /dev/mmcblk1p5: PARTLABEL="atf" PARTUUID="b53a4fe9-d373-41d3-a18e-a6dc958b5da1"
-
To be honest I didn`t try mount -a from CLI
Maybe you can try someday. Based on the output of blkid I would think it will be mounted. If that is the case you probably need to find a way to execute the command with some delay. E.g. by using a simple script with sleep 5 and mount -a.
EDIT:
What should also work is to replace the command in scheduled jobs by sleep 5 && mount -a.
You can check by running the command manually in the GUI of OMV and observe the output. -
-
If you turn on Rock64 and the HDD spins up, but the filesystem is not mounted, can you try mount -a from CLI?
And what is the output of blkid?
To be honest I didn`t try mount -a from CLI, only from web interface in scheduled tasks I add a new task with mount -a command.
Output of blkid
Code/dev/mmcblk1p6: SEC_TYPE="msdos" LABEL="boot" UUID="9EDC-9F0B" TYPE="vfat" PARTLABEL="boot" PARTUUID="fa7b8eca-ad12-475c-8dcf-1c6a59d813fd" /dev/mmcblk1p7: LABEL="linux-root" UUID="b8c23142-1f40-4ed3-b46f-9b0c786e5583" TYPE="ext4" PARTLABEL="root" PARTUUID="35eb320a-8fd2-47c0-be33-c4ffe655f753" /dev/sda1: LABEL="NAS" UUID="37ed4398-0796-40a6-b01f-a6b35a6111a5" TYPE="ext4" PARTUUID="4c50a175-dc8d-40ef-9d97-64ac98aae56e" /dev/mmcblk1: PTUUID="b2dd447e-398e-4430-b563-56a38fa1ed42" PTTYPE="gpt" /dev/mmcblk1p1: PARTLABEL="loader1" PARTUUID="4247738d-4f5e-45be-96f6-472a2f59a804" /dev/mmcblk1p2: PARTLABEL="reserved1" PARTUUID="152441f4-fbde-4742-a0cd-39bb1b4e8a71" /dev/mmcblk1p3: PARTLABEL="reserved2" PARTUUID="9ad6fe91-3f12-4920-baa1-fe2158e7d972" /dev/mmcblk1p4: PARTLABEL="loader2" PARTUUID="12a38b07-2d50-4808-9ccc-d9b03eeafca4" /dev/mmcblk1p5: PARTLABEL="atf" PARTUUID="b53a4fe9-d373-41d3-a18e-a6dc958b5da1"
-----edit-----
Ok, I think I solved a problem modyfing a little bit a hardware site.
I changed a SATA USB adapter. Previously HDD was powered up from USB 3.0, now adapter have additional USB cable to power up HDD. So one cable is connected to 3.0 as communication, second to 2.0 as power supply.
I did few times reboot and since now is ok, I will observe it.
Jetzt mitmachen!
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!