Need help in Configuring AutoShutdown Plugin

  • I Have configured everything correctly. These are my settings.


    But the server not goes to suspend.


    General Settings

    • Enable: Yes
    • Cycle: 2
    • Shutdown Command: Suspend

    -----------------------------------------------------
    Forced Uptime: Nothing (Disabled)
    -----------------------------------------------------
    Supervision Configuration

    • IP Range: Empty
    • Sockets: 21,22,80,139,445,3689,6991,9090,49152
    • ULDL: 50
    • Load Average: 40
    • HDDIO: Disabled
    • Check Smb Status: Enabled
    • Check Users: Disabled

    ----------------------------------------------------
    Syslog Configuration & Expert Settings: Fully Disabled


    ---------------------------------------------------


    = openmediavault information
    ================================================================================
    Release: 4.1.23-1


    Codename: Arrakis

  • First of all: Autoshutdown works only for x86 architecture. ARM-platforms etc. are not supported. Therefore it depends on your hardware.


    More explanations how to configure here: Readme


    Did you check the autoshutdown log-file? There is also a verbose mode with very detailed information what is going on.

    OMV 3.0.100 (Gray style)

    ASRock Rack C2550D4I C0-stepping - 16GB ECC - 6x WD RED 3TB (ZFS 2x3 Striped RaidZ1) - Fractal Design Node 304 -

    3x WD80EMAZ Snapraid / MergerFS-pool via eSATA - 4-Bay ICYCube MB561U3S-4S with fan-mod

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!