[How-To] Nextcloud with Letsencrypt using OMV and docker-compose

    • core-plugin
    • [How-To] Nextcloud with Letsencrypt using OMV and docker-compose

      Docker Container set up by this method can be managed by openmediavault-docker-gui, portainer or from CLI.


      Pre-requisites
      In order to be able to reach nextcloud from the internet you need an external IPv4 address and a hostname.
      Regarding external IPv4 address check you router or ask your internet service provider.
      To register a hostname you can use services like duckdns, selfhost.eu, strato.de or many others.
      Make sure to use strong passwords!!!

      Preparation

      • Install and fully update OMV4 (a restart might be needed if the kernel has been updated)
      • install omv-extras
      • enable docker-ce Repo in omv-extras
      • install openmediavault-docker-gui plugin
      • select suitable docker base path in Services > Docker > Setting (by default it is placed on the OS drive; in case of limited space on the OS drive it should be placed on a data drive)
      • enable docker plugin
      • install docker-compose from CLI apt install docker-compose
      • create a user dedicated for docker in the GUI of OMV, let's call him "docker1"
      • in the CLI determine UID (user ID) and GID (group ID) of user "docker1" id docker1
      Installation of Nextcloud and Letsencrypt in Docker
      • forward ports in your router (check user manual of your router how to to this)
        • port extern 443 to port 444 intern (IP of your NAS)
        • port extern 80 to port 81 intern (IP of your NAS)
      • in CLI:
        • mkdir /home/docker1 create a folder for user docker1 in home directory
        • mkdir /home/docker1/nextcloud create a folder where we will put the docker-compose.yml file to setup nextcloud
        • cd /home/docker1/nextcloud change in that directory
        • nano docker-compose.yml create an empty file and start the editor
        • copy the content of the Source Code box below in the editor, edit the relevant entries and save the file with Ctrl+X and y; name must be "docker-compose.yml"
          • to copy the content of the Source Code box use the small icon in the top right corner of the box ("Copy Contents")
          • text after "#" are comments and indicate where you need to make adjustments to the file
          • PUID is the UID of your docker1 user; PGID is the GID of you docker1 user
          • it is not required that the folders ("appdata", "appdata/nextcloud" etc) in "volumes:" exist; they will be created when we run docker-compose








      Source Code

      1. version: "2"
      2. services:
      3. nextcloud:
      4. image: linuxserver/nextcloud
      5. container_name: nextcloud
      6. environment:
      7. - PUID=1000 #change PUID if needed
      8. - PGID=100 #change PGID if needed
      9. - TZ=Europe/Berlin #change Time Zone if needed
      10. volumes:
      11. - /srv/dev-disk-by-label-disk1/appdata/nextcloud/config:/config #/srv/dev-disk-by-label-disk1 needs to be adjusted
      12. - /srv/dev-disk-by-label-disk1/appdata/nextcloud/data:/data #/srv/dev-disk-by-label-disk1 needs to be adjusted
      13. depends_on:
      14. - mariadb
      15. ports:
      16. - 445:443
      17. - 82:80
      18. restart: unless-stopped
      19. mariadb:
      20. image: linuxserver/mariadb
      21. container_name: nextclouddb
      22. environment:
      23. - PUID=1000 #change PUID if needed
      24. - PGID=100 #change PGID if needed
      25. - MYSQL_ROOT_PASSWORD=mariadbpassword #change password
      26. - TZ=Europe/Berlin #Change Time Zone if needed
      27. volumes:
      28. - /srv/dev-disk-by-label-disk1/appdata/nextclouddb:/config #/srv/dev-disk-by-label-disk1 needs to be adjusted
      29. restart: unless-stopped
      30. letsencrypt:
      31. image: linuxserver/letsencrypt
      32. container_name: letsencrypt
      33. cap_add:
      34. - NET_ADMIN
      35. environment:
      36. - PUID=1000 #change PUID if needed
      37. - PGID=100 #change PGID if needed
      38. - TZ=Europe/Berlin # change Time Zone if needed
      39. - URL=xxxx.de #insert your domain name - yourdomain.url
      40. - SUBDOMAINS=www,
      41. - VALIDATION=http
      42. - EMAIL=xxx.yyy@provider.com # define email; required to renew certificate
      43. volumes:
      44. - /srv/dev-disk-by-label-disk1/appdata/letsencrypt:/config #/srv/dev-disk-by-label-disk1 needs to be adjusted
      45. ports:
      46. - 444:443
      47. - 81:80
      48. restart: unless-stopped
      Display All
      • after you saved the file, run docker-compose up -d in the directory where the docker-compose.yml file is located; this will download the needed images and start the container

      • when finished, run docker logs -f letsencrypt and check for errors
      Configuration of proxy
      • cd /srv/dev-disk-by-label-disk1/appdata/letsencrypt/nginx/proxy-confs /srv/dev-disk-by-label-disk1 has to be adjusted
      • cp nextcloud.subfolder.conf.sample nextcloud.subfolder.conf this will copy the sample configuration file for nextcloud and removes the .sample so that the file will become active
      • nano /srv/dev-disk-by-label-disk1/appdata/nextcloud/config/www/nextcloud/config/config.php and insert the text from the box below at the end, but befor the ");" - change "your.url" to your domain

      Source Code

      1. 'trusted_proxies' =>
      2. array (
      3. 0 => 'letsencrypt',
      4. ),
      5. 'overwritewebroot' => '/nextcloud',
      6. 'overwrite.cli.url' => 'https://your.url/nextcloud',
      7. 'trusted_domains' =>
      8. array (
      9. 0 => 'your.url:443',
      10. ),
      • docker restart letsencrypt to restart the letsencrypt container
      • docker logs -f letsencrypt to check for errors
      • docker restart nextcloud
      Nextcloud can now be reached with https://your.url/nextcloud
      • on the welcome screen of nextcloud we need to configure the database
      • click on "Storage&Database"
      • select MySQL/MariaDB
        • Database user --> "root"
        • Database password --> password which has been specified in the docker-compose file with MYSQL_ROOT_PASSWORD
        • Database name --> "nextcloud"
        • localhost host --> "nextclouddb"
        then click "finish setup"

      Please note: the configuration of the proxy is highly dependent on how you set up your domain. For further details check the available documentation for letsencrypt. E.g.
      blog.linuxserver.io/2019/04/25…domainreverseproxyexample
      hub.docker.com/r/linuxserver/letsencrypt

      Q&A for my HOWTO: forum.openmediavault.org/index…V-and-docker-compose-Q-A/
      Odroid HC2 - armbian - Seagate ST4000DM004 - OMV4.x
      Asrock Q1900DC-ITX - 16GB - 2x Seagate ST3000VN000 - Intenso SSD 120GB - OMV4.x
      :!: Backup - Solutions to common problems - OMV setup videos - OMV4 Documentation - user guide :!:

      The post was edited 8 times, last by macom: corrected "depends on" (mariadb); put the correct names of the fields on the Welcome page of Nextcloud to specify the MySQL/MariaDB added Q&A link ().

    • If you want to use subdomain instead of subfolder:

      Nextcloud with Letsencrypt using errorOMV and docker-compose - Q&A

      subfolder: https://your.url/nextcloud
      subdomain: https://nextcloud.your.url/

      Thanks to @Morlan
      Odroid HC2 - armbian - Seagate ST4000DM004 - OMV4.x
      Asrock Q1900DC-ITX - 16GB - 2x Seagate ST3000VN000 - Intenso SSD 120GB - OMV4.x
      :!: Backup - Solutions to common problems - OMV setup videos - OMV4 Documentation - user guide :!: